Akuvox E11R Manual de Usario

Akuvox sistema de intercomunicación E11R

Lee a continuación 📖 el manual en español para Akuvox E11R (2 páginas) en la categoría sistema de intercomunicación. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
Allen Wrench x 1
Rope x 1
E11X x 1
ST4x20 screw x 4 Screw fixing seat x 4
M2.5x6 screw x 2Back cover x 1
Installaon
With 86 embedded box in the wall
Fix the wall-mounting bracket on
embedded box with two M4x30
screws.
Mark the two holes of the
wall-mounting bracket on the
wall.
Take down two M4x30 screws
and remove the wall-mounting
bracket.
Fix the wall-mounting bracket with two
ST4x20 screws and two M4x30 screws.
Insert two screw fixing
seats into the holes.
Use a hand drill with 5mm diameter bit to
make two 25mm depth holes in the
marked positions.
Step 2: Back cover Installaon Applicaon Network Topology
Fasten the back cover with four
M3x6 screws, then fix four
wall-mounting screws on the
back of E11X.
Configuraon
For convenient wiring, hang
E11X on the wall-mounting
bracket with rope.
Make cables go through the back
cover, connecting to the corresponding
interfaces of the main board.
Without 86 embedded box in the wall
Universal Accessories:
Wall-mounting screw x 4
Step 1: Bracket/Box Installaon
Wall Mounng
23 4
56
1. Access the Web UI: Input the IP address into web browser to configure the phone.
2. Account Registration: On web UI, go to the path: page Account -> Basic
Register Account and fill in the account information. ( Please refer to user manual for
more information)
3. Configure the Push Button: On web UI, go to the path: Intercom -> Basic -> Push Button
to configure the call number.
4. Configure the code to open the relay: On web UI, go to the path: Intercom -> Relay
-> Relay ID/DTMF and choose the DTMF code number in corresponding area.
Rubber Plug x 3 S,M,L（ ）
Camera
RF card reader
Call buon&Status LED
Mic
E11X
Infrared sensor
Infrared LED
Photosensive sensor
Mark the four holes of the
wall-mounting bracket on
the wall for the screws.
Use a hand drill with 5mm diameter
bit to make four 25mm depth holes
in the marked positions.
Fix the wall-mounting bracket
with four ST4x20 screws.
Insert four screw fixing seats into
the holes.
Cable locking plate x 1
Note: For more LED settings, please refer to E11X webUI: Intercom -> LED Setting.
Network Video Recorder
(third party)
SIP Video Phone
LAN
PoE PoE
E11X E11X
PoE PoE
E11X E11X
PC(third party)
PoE PoE
Indoor Monitor
Speaker
Select a suitable size rubber plug
to push all the cables into the back
cover. Fix cable locking plate to
the back cover with two M2.5x6
screws.
After successful installation,
check the stability of device.
Insert the four wall-mounting screws on
the device into the corresponding holes
on the wall-mounting bracket, and then
press down to slide the wall-mounting
screws into the groove. Then use the
Allen Wrench to tighten the device with
two M3x6 screws.
TZ-SM-002038
陈凌谨
余 芳
赵 欣
2019.11.12
2019.11.12
2019.11.12
2019.11.12
2019.11.12
Operaon
Indicators
IP Announcement
Make a call:
1. Press the call button to call indoor SIP Phone.
2. During the talk, called party can press pre-configured code number to unlock the door.
Receive a call:
E11X supports Auto Answer by default. Incoming call will be answered automatically.
1. While E11X starts up normally, hold the call button for several seconds after the Status
LED turns blue, voice system will enter IP announcement mode.
2. In announcement mode, the IP address will be announced periodically.
3. Press Call Button again to quit the announcement mode.
4. In announcement mode, phone announces "IP 0.0.0.0" if no IP address is gained.
M3x6 screw x 6
M4x30 screw x 2 Wall-mounting bracket x 1
E11XE11X
E11X
E11X E11X E11X
60
56
60
E11 AK版挂墙快速安装指南
AKUVOX (XIAMEN) NETWORKS CO., LTD.
ADD: 10/F, NO.56 GUANRI ROAD, SOFTWARE PARK II, XIAMEN 361009, CHINA
www.akuvox.com
Notice Information
Akuvox E11X firmware contains third-party open source software under the terms of the GNU General Public
License(GPL). Akuvox is committed to meeting the requirements of the GNU General Public License (GPL) and will
make all required source code available.
The source code of software under the terms of GNU GPL can be downloaded online: http://www.akuvox.com/gpl.
Information contained in this document is believed to be accurate and reliable at the time of printing. This document is
subject to change without notice, any update to this document can be viewed on Akuvox’ s website:
http://www.akuvox.com © Copyright 2019 Akuvox Ltd. All rights reserved.

Especificaciones del producto

Marca: Akuvox
Categoría: sistema de intercomunicación
Modelo: E11R

¿Necesitas ayuda?

Si necesitas ayuda con Akuvox E11R haz una pregunta a continuación y otros usuarios te responderán


sistema de intercomunicación Akuvox Manuales

Akuvox

Akuvox R27A Manual de Usario

22 Agosto 2024
Akuvox

Akuvox E11R Manual de Usario

18 Agosto 2024

sistema de intercomunicación Manuales

Últimos sistema de intercomunicación Manuales

Extel

Extel Levo JS-V742N2 Manual de Usario

27 Octubre 2024
Dahua Technology

Dahua Technology DHI-VTH5221DW-S Manual de Usario

26 Octubre 2024
Hikvision

Hikvision DS-KIS703-P Manual de Usario

8 Octubre 2024
Viking

Viking K-1900-712L-EWP Manual de Usario

1 Octubre 2024
Viking

Viking K-1700-3 Manual de Usario

1 Octubre 2024
Viking

Viking E-50-SS Manual de Usario

1 Octubre 2024
Viking

Viking E-50-WH Manual de Usario

1 Octubre 2024
Viking

Viking K-1700-IP-EWP Manual de Usario

1 Octubre 2024
Viking

Viking E-60-BN Manual de Usario

1 Octubre 2024
Viking

Viking E-1600-53-IP Manual de Usario

1 Octubre 2024