Allied Telesis AT-CM301 Manual de Usario

Allied Telesis Tarjeta/adaptador de red AT-CM301

Lee a continuación 📖 el manual en español para Allied Telesis AT-CM301 (2 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

1 2 3

AT-CM301 and AT-CM302 Fast Ethernet

Media Converters Installation Guide

Overview

The AT-CM301 and AT-CM302 Media Converters are members of the Converteon family

of media converter products. They provide a simple and reliable way to connect Fast

Ethernet networks across distances of up to 2 kilometers (1.24 miles) using multimode

fiber optic cable. The products feature a 10/100Base-TX port and a 100Base-FX port.

The two cards support all of the same features, but they have different connectors on the

100Base-FX fiber optic ports. The features are listed here.

(* Requires the AT-CV5M02 Management Card.)

(** Requires an AT-CV5M02 Management Card in the upstream AT-CV5000 Chassis.)

Note

These line cards cannot be managed with the AT-CV5M01 Management Card.

613-001068 Rev. A

Converteon Enclosures

This product is supported in all four Converteon enclosures:

AT-CV5000 Chassis

AT-CV1203 Chassis

AT-CV1200 Chassis

AT-CV1000 Chassis

Related Documents

For background information on the Converteon product, refer to the Converteon AT-S73,

AT-S99, and AT-S102 Management Software User’s Guide, available from the Allied

Telesis web site.

Verifying the Package Contents

The following items should be in the shipping container:

One AT-CM301 or AT-CM302 Media Converter

This Installation Guide

Warranty card

If any item is missing or damaged, contact your Allied Telesis sales representative for

assistance. You should retain the original shipping material in case you need to return the

unit to Allied Telesis.

Reviewing Safety Precautions

Before installing the media converter, review the safety precautions detailed in the

Converteon chassis’ Installation Guide.

Twisted Pair Cable Specifications

The cable specifications for the 10/100Base-TX twisted pair port are listed here.

Fiber Optic Cable Specifications

Setting the DIP Switches

The line card has DIP switches for setting the operating mode. You can also set the

operating mode with the optional AT-CV5M02 Management Card. To use the DIP

switches, refer to the figure and table. For background information on the operating

modes, refer to the Converteon AT-S73, AT-S99, and AT-S102 Management Software

User’s Guide.

Installing the Media Converter

Note

The media converter supports hot swapping and can be installed while the chassis

is powered on.

To install the media converter:

1. Remove the slot cover from one of the slots in the Converteon chassis by loosening

the captive screw with a Phillips head screwdriver. The unit can be installed in any of

the media converter slots.

Note

Retain the slot cover and reinstall it if you ever remove the card. An open slot allows

dust to enter the unit and reduces proper airflow in the chassis.

2. Align the edges of the line card with the guides in the slot and carefully slide the card

into the chassis until it is flush with the front of the chassis. Light pressure may be

needed to seat the module on the connector on the backplane in the chassis.

3. Secure the line card in the chassis by tightening the captive-screw with a Phillips

head screwdriver.

4. Remove the dust cover from the fiber optic port.

5. Connect the fiber optic cable to the fiber optic port.

6. Connect a twisted pair cable to the RJ-45 twisted pair port on the line card.

10/100Base-TX Twisted Pair

Port

IEEE 802.3u Auto-Negotiation

Half- or full-duplex mode

Auto-MDI/MDI-X

RJ-45 connector

IEEE 802.3x flow control at 10 or 100 Mbps

100Base-FX Port Supports distances up to 2 kilometers (1.24 miles) using

50/125 µm or 62.5/125 µm (core/cladding) multimode fiber

optic cable.

Fiber Optic Port Connectors AT-CM301 - duplex ST

AT-CM302 - duplex SC

Operating Modes Link Test

MissingLink™

Smart MissingLink

The operating modes can be activated with or without support

for Operations, Administration, and Maintenance.

Operations, Administration, and

Maintenance (OAM) Features

Loopback tests*

Remote Converteon line card management*

Remote management software downloads*

Dying gasp**

Variable requests*

Other Features Jumbo frames up to 10,240 bytes

Ingress and egress packet rate limiting*

Operating mode and port status LEDs

Low power mode

Cyclical redundancy check

Suitable for managed and unmanaged network

environments

Management available with the AT-CV5M02 Management

Card

AT-S102 Management Software (preinstalled)

*613-001068 RevA*

Caution

The media converter line card is sensitive to and can be damaged by

electrostatic discharge. Wear a grounding device and observe electrostatic

discharge precautions when installing the card in the chassis.

Speed Cable Type Maximum Operating

Distance

10 Mbps Standard TIA/EIA 568-B-compliant Category 3 or

better shielded or unshielded cabling with 100 ohm

impedance and a frequency of 16 MHz.

100 m (328 ft)

100 Mbps Standard TIA/EIA 568-A-compliant Category 5 or

TIA/EIA 568-B-compliant Enhanced Category 5

(Cat 5e) shielded or unshielded cabling with 100

ohm impedance and a frequency of 100 MHz.

100 m (328 ft)

Line Card Connector Maximum

Distance Fiber Optic Cable

AT-CM301 Duplex ST 2 km (1.24 mi.) 50/125 µm or 62.5/125 µm (core/

cladding) multimode fiber optic cable

AT-CM302 Duplex SC 2 km (1.24 mi.) 50/125 µm or 62.5/125 µm (core/

cladding) multimode fiber optic cable

Operating Mode Switch 4 Switch 3 Switch 2 Switch 1

Link Test (default setting) Off Off Off Off

MissingLink Off Off Off On

Smart MissingLink Off Off On Off

Link Test with OAM Off On Off Off

MissingLink with OAM Off On Off On

Smart MissingLink with OAM Off On On Off

1 432

OFF

SW1

1447

14 3 2

OFF

SW1

1448

DIP Switch 1

Off

DIP Switch 4

4 5 6

LEDs

The RDY LED displays general status information.

The operating mode of the line card is displayed by the SML, ML and OAM LEDs.

The 100Base-FX port has two LEDs.

The 10/100Base-TX twisted pair port has four LEDs.

Note

For more information on the Link LEDs, refer to the explanation of the media

converter operating modes in the Converteon AT-S73, AT-S99, and AT-S102

Management Software User’s Guide.

ECO Friendly Button

The recessed ECO Friendly button on the front panel of the line card is used to toggle the

low power mode, which controls the LEDs. You can use the mode to turn off the LEDs to

conserve power when you are not monitoring them. To toggle the LEDs on or off, press

the recessed button with a pointed object, such as the end of a straightened paperclip.

You can also toggle the low power mode with the AT-CV5M02 Management Card. The

low power mode does not affect the network operations of the line card or control the

RDY LED.

Default Settings

The default settings for the media converters are listed here.

Fiber Optic Port Specifications

Technical Specifications

Electrical, Safety, and Emissions Statements

Standards: This product meets the following standards when installed in compliant host equipment.

Emission FCC Class A, EN55022 Class A, VCCI Class A, C-TICK, CE

Immunity EN55024

Electrical Safety UL60950-1 ( cULus), EN60950-1 (TUV), CAN/CSA C22.2 No. 60950-1

reproduced without prior written permission from Allied Telesis, Inc. www.alliedtelesis.com.

LED State Status/Operating Mode

RDY

(Ready)

Off The line card is initializing the AT-S102 Management Software,

which takes approximately one minute, or the card is not receiving

power.

Green The line card has initialized its management software and is ready to

transfer network traffic.

Operating Mode

LEDs

SML

(Smart

MissingLink)

(Missing Link)

OAM

(Operations,

Administration

and

Maintenance)

Link Test mode Off Off Off

Link Test mode with OAM Off Off On

MissingLink mode Off On Off

MissingLink mode with OAM Off On On

Smart MissingLink mode On Off Off

Smart MissingLink mode with OAM On Off On

LED Color Description

(Link)

Off The fiber optic port has not formed a link with the remote device.

Green The port has formed a link with the fiber optic port on the remote

device.

Blinking

Green

The media converter is operating in the Smart MissingLink mode

and the twisted pair port has not formed a link with a network device.

(Activity)

Off The port is not connected to a fiber optic cable, has not formed a link

with the remote device, or is not sending or receiving network traffic.

Blinking

Green

The fiber optic port is receiving or transmitting network packets.

LED Color Description

(Link)

Off The port has not formed a link with a network device.

Green The port has formed a link with a network device.

Flashing Green The media converter is operating in the Smart MissingLink

mode and the fiber optic port has not formed a link with a

network device.

(Activity)

Off The port is not receiving or transmitting network packets.

Blinking Green The port is receiving or transmitting network packets.

(Full

duplex)

Off The port is operating in half-duplex mode.

Green The port is operating in full-duplex mode.

100M Off The port is operating at 10 Mbps.

Green The port is operating at 100 Mbps.

Feature Default Setting

Basic Settings

Operating Mode Link Test

Maximum Frame Size 10240 bytes

Twisted Pair Port Auto-Negotiation with auto-MDI/MDI-X

Ingress and Egress Filtering None

Low Power Mode Disabled

Operating Mode DIP Switches Enabled

OAM Settings

Admin State Enabled

Mode Passive

Maximum OAMPDU Size 1518 bytes

Loopback Support Enabled

Variable Retrieval Support Enabled

General

Maximum Distance 2 km (1.24 miles)

Fiber Optic Cable 50/125 µm or 62.5/125 µm (core/cladding) multimode fiber optic

cable

Transmitter

Wavelength 1310 nm

Output Optical Power - 50/

125 µm

BOL: -22.5 dBm min.; -14 dBm max.

EOL: -23.5 dBm min.; -14 dBm max.

LED Color Description Output Optical Power - 62/

125 µm

BOL: -19 dBm min.; -14 dBm max.

EOL: -20 dBm min.; -14 dBm max.

Receiver

Wavelength 1310 nm

Sensitivity -31 dBm max.

Maximum Input Power -14 dBm min.

Physical and Environmental

Dimensions (H x W x L) 22 mm x 73 mm x 130 mm

(.86 in. x 2.9 in. x 5.1 in.)

Weight 113 grams (0.25 lb.)

Operating Temperature 0° C to 40° C (32° F to 104° F)

Storage Temperature -25° C to 70° C (-13° F to 158° F)

Operating Relative Humidity 5% to 90% RH (non-condensing)

Storage Relative Humidity 5% to 95% RH (non-condensing)

Operating Altitude Range Up to 3,048 m (10,000 ft.)

MTBF 1,500,000 hours

Electrical Ratings

Power Consumption 8.5 Watts maximum

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant

to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with this instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the interference at

his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right

to operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur

du Canada.

Warning

In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

Especificaciones del producto

Marca:	Allied Telesis
Categoría:	Tarjeta/adaptador de red
Modelo:	AT-CM301

¿Necesitas ayuda?

Si necesitas ayuda con Allied Telesis AT-CM301 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Tarjeta/adaptador de red Allied Telesis Manuales

Allied Telesis AT-2874SX/SC-001 Manual de Usario

11 Septiembre 2024

Allied Telesis AT-CM301 Manual de Usario

11 Septiembre 2024

Allied Telesis AT-2973SX Manual de Usario

11 Septiembre 2024

Allied Telesis 2911SX/ST Manual de Usario

11 Septiembre 2024

Allied Telesis AT-2814FX/SC-001 Manual de Usario

11 Septiembre 2024

Allied Telesis AT-ANC10S/2+SP10SR-001 Manual de Usario

11 Septiembre 2024

Allied Telesis 2716POE/FXSC Manual de Usario

11 Septiembre 2024

Allied Telesis AT-SBx81GS24a Manual de Usario

11 Septiembre 2024

Allied Telesis AT-ANC10S/2 Manual de Usario

11 Septiembre 2024

Tarjeta/adaptador de red Manuales

Últimos Tarjeta/adaptador de red Manuales

Cambium Networks CG52A Manual de Usario

26 Octubre 2024

StarTech.com ST1000SPEXD4T Manual de Usario

22 Octubre 2024

Devolo MicroLink dLAN duo Manual de Usario

16 Octubre 2024

Edimax HP-5001K Manual de Usario

16 Octubre 2024

LevelOne FNC-0109TX Manual de Usario

14 Octubre 2024

Edimax EW-7822ULC Manual de Usario

9 Octubre 2024

ZyXEL AP Configurator Manual de Usario

6 Octubre 2024

Linksys AE1000 Manual de Usario

6 Octubre 2024

Trendnet TEW-624UB Manual de Usario

5 Octubre 2024

Nec NP06LM Manual de Usario

4 Octubre 2024