Alpine RUX-H02 Manual de Usario

Alpine Mando a distancia RUX-H02

Lee a continuación 📖 el manual en español para Alpine RUX-H02 (3 páginas) en la categoría Mando a distancia. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

12S21070J91-0

WARNING

This symbol means important instructions. Failure to follow

them can result in serious injury or death.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident,  re or electric shock.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a

physician immediately.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY

DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be

performed a er coming to a complete stop. Always stop the vehicle in

a safe location before performing these functions. Failure to do so may

result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE

DRIVING.

Failure to do so may result in an accident.

Do not ingest battery, Chemical Burn Hazard.

 e remote commander contains a coin/ button cell battery. If the coin/

button cell battery is swallowed, it can cause severe internal burns in

just 2 hours and can lead to death. Keep new and used batteries away

from children. If the battery compartment does not close securely, stop

using the product and keep it away from children. If you think batteries

may have been swallowed or placed inside any part of the body, seek

immediate medical attention.

CAUTION

This symbol means important instructions. Failure to follow

them can result in injury or material property damage.

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY

POLARITY.

Risk of explosion if battery is replaced by an incorrect type. Dispose of

used batteries according to the instructions. When inserting the batteries,

be sure to observe proper polarity (+ and –) as instructed.

Handling Precautions

Do not drop or apply shock to the unit. It may get permanently

damaged.

Keep the unit away from water and moisture, direct sun and heat, and

excessive dust.

Never use scouring pads, steel wool, abrasive powders or harsh

chemical agents, such as lye solution, for cleaning.

Clean with a soft, lint-free cloth or cotton swab slightly dampened

with a mild solution of detergent and water.

Do not operate this unit in a manner that could distract you from

driving safely.

Installation of Remote Control Holder

Do not leave the remote control mounted on the holder, if it is direct

sunlight. Remove the remote control from the holder and put it in the

glove compartment.

If double-sided adhesive tape cannot install the holder securely, use

screws.

When mounted to the Display Audio, do not press the unit hard to

operate it. The Display Audio may be damaged.

ALPINE WIRELESS KNOB

RUX-H02

Supported models

This product connects to the following models.

iLX-507/iLX-F509/iLX-F511/i509

And This product can also be mounted on the iLX-F509/F511. Check P3 for details.

1500 Atlantic Blvd,

Auburn Hills, Michigan 48326 U.S.A.

Phone 1-800-ALPINE-1 (1-800-257-4631)

- 2 -

Attachment

RUX-H02 Mounting Bracket1 Mounting Bracket2

x1 x1 x1

Battery Screw1 Screw2

(CR2032)

x1 x2 x2

Location of Controls

(1) (3)

(2)

(1) LED Indicator

It turns on when the unit is connected/operated.

(2) Rotary Knob

To turn the volume up and down, respectively.

(3) Lid

Turn counter-clockwise to open the lid.

Connecting the unit

1. Insert the battery using the following procedure:

* Ensure the positive (+) side faces up as shown in the illustration

below.

When the battery is set, the unit enters the connection standing-by

mode. While the LED is  ashing, perform the procedure in Step 2.

If the LED turns o while performing the procedure in Step 2, press

the Rotary Knob. The LED starts  ashing again.

Follow this procedure to connect the RUX-H02 to the Display

Audio unit.

1) Select [Setup].

2) Select [Device], then [Device List].

3) Select [Add New Device].

4) Select [ALPINE KNOB].

5) Select [YES] when the screen below is displayed.

MEMO

When the Display Audio is o for a certain period of time, the unit

is disconnected.

The unit is reconnected automatically when the Display Audio is

turned on and the Rotary Knob is operated.

* It may take some time for the unit to reconnect in some situa

tions.

- 3 -

Operating the unit

The unit supports the following operation:

· Turning the Rotary Knob: Volume up/down

When the subwoofer is connected and setting is turned on in

the Sound Menu of the Display Audio, the following operation is

supported.

· Turning the Rotary Knob while pressing it: Turn the subwoofer

volume level up/down

3. When the subwoofer is not connected and setting is turned o in

the Sound Menu, Bass volume level adjustment in the Bass/Treble

function of the Display Audio is enabled.

· Turning the Rotary Knob while pressing it: Bass volume level up/

down

If the device does not function after making a connection, follow the

procedure on page 2 to replace the battery and then try reconnecting.

Mounting example

1. The enclosed mounting bracket can be used to mount the unit

to iLX-F509/F511. (The unit can be mounted on the left or right

side).

RUX-H02

Mounting

Bracket1 Mounting

Bracket2

Screw1

Screw2

Especificaciones del producto

Marca:	Alpine
Categoría:	Mando a distancia
Modelo:	RUX-H02
Color del producto:	Zwart
Peso.:	269 g
Ancho:	105 mm
Profundidad:	9.3 mm
Altura:	189 mm
Capacidad del acumulador/batería:	3450 mAh
Bluetooth:	Ja
Diagonal de la pantalla:	7 "
Resolución:	1024 x 600 Pixels
Acelerómetro:	Ja
Frecuencia del procesador:	1.3 GHz
Familia de procesadores:	Mediatek
Modelo de procesador:	MT8127
Número de núcleos de procesador:	4
Capacidad de almacenamiento interno:	8 GB
Capacidad máxima de la tarjeta de memoria:	32 GB
Estándares wifi:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Versión Bluetooth:	4.0
GPS:	Ja
Posición de ubicación:	Ja
factor vorm:	Slate
Resolución de la cámara trasera (numérica):	2 MP
Resolución de la cámara frontal (numérica):	0.3 MP
Tipo de cámara trasera:	Enkele camera
Incluye sistema operativo:	Android
Plataforma:	Android
Tipo de enchufe de conexión:	3,5 mm
Comunicación de campo cercano (NFC):	Nee
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	MicroSD (TransFlash)
tecnología táctil:	Multi-touch
Tipo de pantalla táctil:	Capacitief
Micrófono, entrada de línea:	Nee
Altavoces incorporados:	Ja
Número de altavoces incorporados:	1
Resolución máxima de vídeo:	- Pixels
Micrófono incorporado:	Ja
Memoria interna:	1 GB
Medios de almacenamiento:	Flash
Duración de la batería/duración de la batería:	8 uur
Tipo de memoria interna:	LPDDR3-SDRAM
Versión del sistema operativo:	4.4
Software incluido:	Skype, Twitter, WeChat\nGoogle Android Suite, Guvera Music, Txtr eBooks, Tap the Frog\nKingsoft Office, Evernote, UC Browser\nSHAREit, SYNCit, Security
Estándar Wi-Fi:	Wi-Fi 4 (802.11n)
Estuche de almacenamiento:	Ja
tipo de dispositivo:	Minitablet
Tiempo de espera:	432 uur
Enlace móvil de alta definición (MHL):	Nee
Tipo de panel:	IPS
Cámara frontal:	Ja
Tecnología Intel® Mi WiFi (Intel® MWT):	Nee
Cámara trasera:	Ja
Auriculares apagados:	Ja
Teclado incluido:	Nee
Adaptador de CA, voltaje de salida:	5 V
Adaptador de CA, potencia de salida:	1 A
Koptelefoon:	Ja
Tecnología de batería:	Lithium-Ion (Li-Ion)
WWAN:	Nee
Número de celdas de batería:	1