Aluratek ABC53F Manual de Usario
Aluratek
receptor bluetooth
ABC53F
Lee a continuación 📖 el manual en español para Aluratek ABC53F (1 páginas) en la categoría receptor bluetooth. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/1
Power Button
Bluetooth Status LED
Package Contents Product Highlights Product Application
Operation Operation
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
Radio and TV Interference Statement
Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has
been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR
IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's
products, contents or use of this documentation and all accompanying software, and specifically
disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek
reserves the right to revise or update it's product, software or documentation without obligation to
notify any individual or entity.
Warranty
qsg Q10468 Copyright © 2018 Aluratek, Inc. All Rights Reserved.
aluratek.com
model ABC53F
Quick Start Guide
Universal Bluetooth Audio Receiver & Transmitter w/ Bluetooth 5
Technical Support
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Control Functions
Function Operation
Power ON When OFF, press and hold the Power Button for 3 seconds until
the blue LED flashes
Pairing When powered on, press the Power Button twice to start pairing
(LED flashes red and blue for RX, LED flashes blue for TX)
Slide the Mode Switch to and from TX and RX
In RX mode, press the Power Button once to play / pause music
Power OFF
Play / Pause
Mode Switch
When ON, press and hold the Power Button for 3 seconds until
the red LED flashes
Pairing in Transmitter Mode
Please make sure the device supports A2DP profile. The pairing procedure will vary
depending on the actual device. Please refer to the user guide of your device for detail
instruction. The general pairing procedures are as follows:
1. Make sure ABC53F is turned OFF and switched to TX mode
2. Activate your device’s Bluetooth function and set your device to pairing mode
3. Press and hold the power button for 3 seconds to power on ABC53F
4. Activate ABC53F pairing mode by press the power button twice.
5. ABC53F and your Bluetooth device will pair automatically
6. After connecting successfully, the blue LED will stay on.
Note: After the initial pairing of your Bluetooth device with ABC53F. It is recommend that you power on your Bluetooth
device first before you power on ABC53F for subsequent uses for faster reconnection. If the device does not
reconnect, you may press the power button to speed up the process.
Your order has been carefully packaged and inspected. The following accessories should
be included in your package. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact us immediately for assistance.
Note: Please wait 3 seconds after ABC53F is powered OFF to switch the mode. After the switch, the pairing
history of the previous devices will be cleared. You will need to re-pair your Bluetooth devices to ABC53F after
you switch between TX / RX mode.
Operation
Operation
Pair with two devices at the same time in TX mode
In TX mode, the adapter is able to pair with two Bluetooth stereo headphones / speakers
at the same time.
1. Follow the previous instructions in the “Pairing in Transmitter Mode” section to pair
ABC53F with your first device.
2. Turn off the Bluetooth function on your first device, tap the Power Button twice to pair
and connect to your second device.
3. Turn on the Bluetooth function on your first device. In approximately 30 seconds, the
second device will automatically connect.
Pairing in Receiver Mode
Please make sure the device supports A2DP profile. The pairing procedure will vary
depending on the actual device. Please refer to the user guide of your device for detail
instruction. The general pairing procedures are as follows:
1. Make sure ABC53F is turned OFF and switched to RX mode
2. Press and hold the power button for 3 seconds to power on ABC53F
3. Activate ABC53F pairing mode by press the power button twice.
4. Activate your device’s Bluetooth function and set your device to search for Bluetooth
device. Select ABC53F when it is found.
5. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you
are prompted for PIN, please enter “0000”.
6. If prompted by your device to connect, please select “Yes”.
7. After connecting successfully, the blue LED will stay on.
Note: Please make sure the audio output of your device is set to Bluetooth for audio streaming.
Operation
LED Indicators
LED Indicator Status
Solid Red LED Charging
Flashing Red and Blue Pairing mode in Receiver Mode
Low battery
Successfully paired
LED Off
Solid Blue LED
Pairing mode in Transmitter Mode
Flashing Blue
(Every 2 Seconds)
Flashing Red
Power OFF / Fully charged if connected to a power source
Note: For first time use, once powered on, the adapter will automatically enter pairing mode. The LED will flash
blue and red. Please follow the instructions below on how to pair.
Charging the battery
The battery is not fully charged and it is highly recommended that you charge ABC53F
before you begin using it.
Note: Using ABC53F “out of the box” will not harm the device.
You will experience reduced battery life as the unit will not be fully charged. Connect the
larger USB end of the cable provided to your PC or USB power adapter (not included)
and the smaller Micro USB to the charging port of ABC53F. Please charge the battery for
a minimum of (2) hours. The red LED will be on while charging. When charging is
complete, the red LED will turn off.
Operation
Using ABC53F with power connected
Here are the steps to follow if you want to use ABC53F with power connected. ABC53F
will stay in standby mode as long the power is connected so your Bluetooth device can
reconnect automatically after you are within range.
1. Make sure ABC53F is turned OFF.
2. Connect the larger USB end of the cable provided to your PC / power adapter / TV’s
USB port and the smaller end to the charging port of ABC53F.
3. Follow the pairing instruction to pair your device.
Operation
APTX-HD for Bluetooth 5 setup
To enjoy APTX-HD for Bluetooth 5, please follow below steps.
To enable / disable APTX-HD:
1. Please make sure ABC53F is powered off.
2. Press and Hold the power button for 7 seconds until you see the green LED flash.
When enabled, the green LED will flash once. When disabled, it will flash twice.
3. Power on ABC53F by press and hold the power button for 3 seconds.
Note: When APTX-HD is enabled, APTX-LL will be disabled. ABC53F defaults to APTX-LL
when the connected device supports this feature.
Operation
TX / RX Mode Switch
RCA Ports
RX TX
USB Charging Cable
Registration Card
3.5mm Cable RCA-Y Cable
Digital Optical Cable
Optical (SPDIF) Ports*
Micro USB Charging Port
AUX (3.5mm) Port
*In SPDIF mode, connect devices through SPDIF IN for TX mode
and SPDIF OUT for RX mode
Bluetooth headphones, earbuds,
and speakers
Bluetooth enabled smartphones,
tablets, desktops and laptops
Stereos, speaker docks and car
stereos with an AUX IN (3.5 mm)
or RCA IN or Optical (SPDIF) IN
TVs, computers and MP3 players
with an AUX OUT (3.5 mm)
or RCA OUT or Optical (SPDIF) OUT
Use ABC53F
as a Receiver
Use ABC53F
as a Transmitter
3.5 mm
cable
RCA-Y
cable
Optical
(SPDIF)
cable
OR OR
3.5 mm
cable
RCA-Y
cable
Optical
(SPDIF)
cable
OR OR
UP TO
300’
Especificaciones del producto
| Marca: | Aluratek |
| Categoría: | receptor bluetooth |
| Modelo: | ABC53F |
¿Necesitas ayuda?
Si necesitas ayuda con Aluratek ABC53F haz una pregunta a continuación y otros usuarios te responderán
receptor bluetooth Aluratek Manuales
22 Agosto 2024
20 Agosto 2024
receptor bluetooth Manuales
- receptor bluetooth Speed-Link
- receptor bluetooth Naxa
- receptor bluetooth T'nB
- receptor bluetooth Monoprice
- receptor bluetooth Vantec
- receptor bluetooth StarTech.com
- receptor bluetooth Wavemaster
Últimos receptor bluetooth Manuales
17 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
29 Agosto 2024
27 Agosto 2024
27 Julio 2024