Atlona AT-AVA-EX70C-KIT Manual de Usario
Atlona
repetidor wifi
AT-AVA-EX70C-KIT
Lee a continuación 📖 el manual en español para Atlona AT-AVA-EX70C-KIT (12 páginas) en la categoría repetidor wifi. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/12
1
Installation Guide
AT-AVA-EX70C-KIT
4K/UHD HDMI Extender Kit with Control and Remote Power
AT-AVA-EX70C-KIT
The Atlona AT-AVA-EX70C-KIT is an Avance™ Series HDBaseT transmitter and receiver set
that supports control pass-through and remote power capability. The kit transmits 4K/UHD
60Hz 4:2:0 video up to 130 feet (40 meters) or 1080P 60Hz video up to 230 feet (70 meters). In
addition to video with embedded multi-channel audio, RS-232 and IR control signals, and remote
power from the transmitter to the receiver are supported on the single CAT6A/7 cable. Integrated
HDBaseT link status testing allows quick verication of cable, termination, and link quality. HDMI
clock stretching and EDID ltering are included to ensure the integrity of video transmission as
well as compatibility with the widest array of sources and display devices. Compact enclosures
and included brackets allow the transmitter and receiver endpoints to be surface mounted
in furniture or behind a display. The AT-AVA-EX70C-KIT delivers a cost-eective solution for
extension of video, audio, control, and receiver power at resolutions up to 4K/UHD.
IMPORTANT: Visit https://atlona.com/product/AT-AVA-EX70C-KIT for the latest rmware
updates and Installation Guide.
1 x AT-AVA-EX70C-TX
1 x AT-AVA-EX70C-RX
1 x 2-pin captive screw connector
2 x 3-pin captive screw connector
1 x 4-pin captive screw connector
1 x 5-pin captive screw connector
1 x IR emitter
4 x Mounting brackets
8 x Mounting screws
1 x 48V DC power supply
1 x IEC cable
1 x Installation Guide
Package Contents
2
Installation Guide
AT-AVA-EX70C-KIT
HDBaseT IN HDMI OUT
AT-AVA-EX70C-RX
PWR
LINKFW
S SP
IR IN IR OUT
RX TX
RS-232
DC 48V HDBaseT OUT HDMI IN
AT-AVA-EX70C-TX
PWR
LINKFW
+-
RX TX
RS-232
S S
IR IN IR OUT
TEST
Panel Descriptions
1 TEST
Quick and easy test for category cables.
Use the button to start the test and the
LED to determine pass or fail.
2 FW
Connect a micro-USB to USB-A type
cable from this port to a computer, to
update the rmware.
3 POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
4 DC 48V
Connect the included power supply to this
port.
5 RS-232
Bidirectional control port, used for pass
through of commands to or from the
receiver.
6 IR IN/OUT
Connect a 3rd party controller to the IR IN
port or an IR emitter to the IR OUT port.
7 HDBaseT OUT
Connect an HDBaseT cable from this port
to the port on the receiver.HDBaseT IN
8 HDMI IN
Connect an HDMI cable from a source to
this port. e.g. HDR BluRay Player
9 FW
Not used at this time.
10 POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
11 RS-232
Bidirectional control port, used for pass
through of commands to or from the
transmitter.
12 IR IN/OUT
Connect an IR receiver to the IR IN port or
an IR emitter to the IR OUT port.
13 HDBaseT IN
Connect an HDBaseT cable from this
port to the port on the HDBaseT OUT
transmitter.
14 HDMI OUT
Connect an HDMI cable from this port to
an HDMI display.
115 6 7 8 12 13 144
103 921
3
Installation Guide
AT-AVA-EX70C-KIT
HDBaseT IN
HDBaseT OUT
HDBaseT LED Descriptions
a Green LED
When a category cable is connected
and receiving signal this LED will be
illuminated. If no cable or signal is being
received, the LED will be o.
b Yellow LED
This LED displays the status of the
HDBaseT rmware. When the LED is
blinking slowly, the rmware is good. If
the LED is blinking rapidly or o, there
is no rmware or the rmware has been
corrupted.
b ba a
Pin out will be determined by the
RS-232 cable and connect as
RX (receive), TX (transmit) and
(Ground).
A 3-pin captive screw connector for RS-232 has been included.
Two captive screw connectors for IR have been included. A 4-pin connector for the transmitter
and a 3-pin connector for the receiver.
IR IN is connected by a power, ground, and signal
wire. Use a 12V IR receiver with it ( AT-IR-CS-RX e.g.
purchasable through atlona.com).
IR IN is connected by a ground and signal wire. Use
with 3rd party control systems. For easy termination,
Atlona recommends using the 2 meter IR cable AT-LC-
CS-IR-2M (purchasable through atlona.com).
IR OUT is connected by a ground and signal wire.
Use the included IR emitter with this port.
IR OUT is connected by a ground and signal wire.
Use the included IR emitter with this port.
RS-232
IR
IR IN IR OUT
GND SSP
GND RX TXGNDRX TX
IR IN IR OUT
GND SS
Especificaciones del producto
| Marca: | Atlona |
| Categoría: | repetidor wifi |
| Modelo: | AT-AVA-EX70C-KIT |
¿Necesitas ayuda?
Si necesitas ayuda con Atlona AT-AVA-EX70C-KIT haz una pregunta a continuación y otros usuarios te responderán
repetidor wifi Atlona Manuales
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
repetidor wifi Manuales
- repetidor wifi Xiaomi
- repetidor wifi Medion
- repetidor wifi Allnet
- repetidor wifi Edimax
- repetidor wifi Strong
- repetidor wifi Hikvision
- repetidor wifi Silvercrest
- repetidor wifi Gembird
- repetidor wifi Asus
- repetidor wifi Renkforce
- repetidor wifi Sitecom
- repetidor wifi TP Link
- repetidor wifi Black Box
- repetidor wifi Vision
- repetidor wifi Axis
- repetidor wifi AVM
- repetidor wifi Totolink
- repetidor wifi Cisco
- repetidor wifi Steren
- repetidor wifi Engenius
- repetidor wifi Envivo
- repetidor wifi Digitus
- repetidor wifi Devolo
- repetidor wifi Linksys
- repetidor wifi Buffalo
- repetidor wifi Davis
- repetidor wifi Netgear
- repetidor wifi LevelOne
- repetidor wifi Mercusys
- repetidor wifi Planet
- repetidor wifi Western Digital
- repetidor wifi D-Link
- repetidor wifi Essentiel B
- repetidor wifi Fluke
- repetidor wifi Marmitek
- repetidor wifi Ubiquiti Networks
- repetidor wifi Mikrotik
- repetidor wifi Hawking Technologies
- repetidor wifi Crestron
- repetidor wifi Moxa
- repetidor wifi Smart-AVI
- repetidor wifi StarTech.com
- repetidor wifi SIIG
- repetidor wifi IOGEAR
- repetidor wifi Extron
- repetidor wifi KanexPro
- repetidor wifi DTRONIC
- repetidor wifi Cudy
- repetidor wifi Lindy
- repetidor wifi HELGI
- repetidor wifi Tycon Systems
- repetidor wifi Multi-link
- repetidor wifi Atto
- repetidor wifi Amped Wireless
- repetidor wifi Barox
- repetidor wifi Heden
- repetidor wifi Ruckus Wireless
- repetidor wifi Axing
- repetidor wifi EXSYS
- repetidor wifi Gewiss
- repetidor wifi Seco-Larm
- repetidor wifi NetComm
- repetidor wifi Altronix
- repetidor wifi Juniper
- repetidor wifi ALC
- repetidor wifi Comtrend
- repetidor wifi Universal Remote Control
- repetidor wifi IDIS
- repetidor wifi CSL
Últimos repetidor wifi Manuales
14 Octubre 2024
10 Octubre 2024
10 Octubre 2024
3 Octubre 2024
3 Octubre 2024
30 Septiembre 2024
30 Septiembre 2024
29 Septiembre 2024
29 Septiembre 2024
28 Septiembre 2024