Atlona AT-OME-EX-KIT Manual de Usario

Atlona repetidor wifi AT-OME-EX-KIT

Lee a continuación 📖 el manual en español para Atlona AT-OME-EX-KIT (12 páginas) en la categoría repetidor wifi. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
1
Installation Guide
AT-OME-EX-KIT
Omega 4K/UHD
HDMI Over HDBaseT TX/RX with USB, Control, and PoE
AT-OME-EX-KIT
The Atlona AT-OME-EX-KIT is an HDBaseT extender for video up to 4K/60 4:2:0, plus
embedded audio, control, Ethernet, and USB 2.0 over distances up to 330 feet (100 meters).
Part of the Omega Series of integration products for modern AV communications and
collaboration, the OME-EX-KIT is HDCP 2.2 compliant and extends IR, RS-232, and IP control
signals. The integrated USB extension is ideal for software video conferencing and the use of
touch or interactive displays. The OME-EX-TX transmitter includes a USB host port for a PC,
plus two peripheral devices such as a speakerphone, microphone, or keyboard and mouse. The
OME-EX-RX receiver provides two USB 2.0 interfaces for devices such as a camera or display.
The transmitter and receiver are available separately, for use with other Omega Series integration
products.*
* Both the AT-OME-EX-TX and AT-OME-EX-RX are not compatible with the AT-UHD-HDVS-300
system for extending USB.
IMPORTANT: Visit http://www.atlona.com/product/AT-OME-EX-KIT for the
latest rmware updates and User Manual.
1 x AT-OME-EX-TX
1 x AT-OME-EX-RX
2 x Captive screw connectors, 4-pin
1 x AT-IR-CS-TX
4 x Mounting plates
8 x Mounting screws
1 x 48 V DC power supply
1 x Installation Guide
Package Contents
2
Installation Guide
AT-OME-EX-KIT
1 LAN
Connect a category cable from this port to a network switch. This cable provide IP pass-
through transport control from a control system to the display (sink) device connected to the
AT-OME-EX-RX.
2 DEVICE
Connect up to two USB devices (e.g. mouse, keyboard, etc.) to these ports. These ports
provide 2.5 W per USB device interface.
3 HOST
Connect a USB cable from this port to the host computer.
4 FW
Connect a mini USB-to-USB cable from this port, to a computer, to update the rmware.
Refer to for more information.Updating the Firmware (page 11)
5 PWR / LINK
The LED indicator will glow green when the AT-OME-EX-TX is powered. The AT-OME-PWR
EX-RX supplies power to the AT-OME-EX-TX over HDBaseT. The LED indicator glows LINK
yellow when a solid link is established between the AT-OME-EX-TX and AT-OME-EX-RX.
Refer to for more information.LED Indicators (page 6)
6 RS-232 / IR
Connect the included 4-pin captive screw block to this receptacle. Refer to RS-232 and IR
(page 4) for more information.
7 HDBaseT OUT
Connect a category cable from this port to the port of the AT-OME-EX-RX or HDBaseT IN
other PoE-compatible receiver.
8 HDMI IN
Connect an HDMI cable from this port to the source device.
Front
Rear
HDMI IN
AT-OME-EX-TX
HDBaseT OUT
RX RXTX
RS-232 IR
8
6 7
LAN FWHOST
OMEGATM
DEVICE
PWR
LINK
2
1 3 4 5
AT-OME-EX-TX
3
Installation Guide
AT-OME-EX-KIT
1 LAN
Connect a category cable from this port to the display (sink) device. This cable provides IP
pass-through transport control to the display (sink) device, from a control system connected
to the AT-OME-EX-TX.
2 DEVICE
Connect up to two USB 2.0 devices (e.g. mouse, keyboard, etc.) to these ports.
These ports provide 2.5 W per USB device.
3 FW
Connect a mini USB-to-USB cable from this port, to a computer, to update the rmware.
Refer to for more information.Updating the Firmware (page 11)
4 PWR / LINK
The LED indicator will glow green when the AT-OME-EX-RX is powered. The PWR LINK
LED indicator glows yellow when a solid link is established between the AT-OME-EX-TX and
AT-OME-EX-RX. Refer to for more information.LED Indicators (page 6)
5 DC 48V
Connect the included 48 V DC power supply to this power receptacle.
6 RS-232 / IR
Connect the included 4-pin captive screw block to this receptacle. Refer to RS-232 and IR
(page 4) for more information.
7 HDBaseT IN
Connect a category cable from this port to the port of the AT-OME-EX-TX. HDBaseT OUT
The AT-OME-EX-TX is powered by the AT-OME-EX-RX over HDBaseT.
8 HDMI OUT
Connect an HDMI cable from this port to the display (sink) device.
AT-OME-EX-RX
LAN FW
OMEGAT M
DEVICE
PWR
LINK
HDMI OUTHDBaseT IN
RX TXTX
RS-232 IRDC 48V
AT-OME-EX-RX
Front
Rear
8
65 7
2
1 3 4

Especificaciones del producto

Marca: Atlona
Categoría: repetidor wifi
Modelo: AT-OME-EX-KIT

¿Necesitas ayuda?

Si necesitas ayuda con Atlona AT-OME-EX-KIT haz una pregunta a continuación y otros usuarios te responderán




repetidor wifi Atlona Manuales

repetidor wifi Manuales

Últimos repetidor wifi Manuales