Atlona AT-OPUS-RX Manual de Usario

Atlona receptor AT-OPUS-RX

Lee a continuación 📖 el manual en español para Atlona AT-OPUS-RX (8 páginas) en la categoría receptor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

Installation Guide

AT-OPUS-RX

4K HDR HDMI Over 100 M HDBaseT RX for Opus Series

Matrix Switchers

AT-OPUS-RX

The Atlona AT-OPUS-RX is an HDBaseT receiver for high dynamic range (HDR) formats, designed

for use with the Opus™ Series of HDMI® to HDBaseT™ matrix switchers. The OPUS-RX is

HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well

as HDMI data rates up to 18 Gbps. It receives HDMI, Ethernet pass-through, and bidirectional

IR and RS-232 control signals up to 330 feet (100 meters) over CAT6a/7 cable. Visually lossless

VESA Display Stream Compression (DSC) enables HDR and 4K/60 4:4:4 video signal extension

over HDBaseT with little to no latency. For additional integration convenience, the receiver is

remotely powered by an Opus Series matrix switcher through Power over Ethernet (PoE). The

OPUS-RX supports the HDMI Audio Return Channel (ARC), with the ability to transmit digital

audio from a television back to an AV receiver through the matrix switcher.

IMPORTANT: Visit http://www.atlona.com/product/AT-OPUS-RX for the latest rmware

updates and Installation Guide.

Package Contents

1 x AT-OPUS-RX

2 x Mounting brackets

4 x Mounting screws

1 x IR Emitter

1 x 3-pin captive screw connector

1 x 5-pin captive screw connector

1 x Installation Guide

Installation Guide

AT-OPUS-RX

SP S

PoE

RX TX

HDMI OUTIR IN IR OUT RS-232AUDIO IN ETHERNET LINK PoE DEBUGHDBaseT IN

AT-OPUS-RX

PWR

LINK

RECEIVER

OPUS

T M

Panel Descriptions

1 POWER

This LED indicator glows solid green when the

unit is powered.

2 LINK

This LED indicator glows solid amber when

an HDMI output is connected and a solid link

is established between the transmitter and

receiver.

3 AUDIO IN

Connect a digital audio cable from the

TOSLINK™ port on the display to this port.

This port serves as the input for the Audio

Return Channel (ARC), receiving audio from the

display and sending it to the transmitter.

4 RS-232

Connect the included 3-pin captive screw

connector to this port for bidirectional RS-232.

5 IR

Connect the included 5-pin captive screw

connector to this port for IR pass through.

6 Ethernet

Connect a LAN cable from this port to either a

network switch or Ethernet capable display.

7 HDMI OUT

Connect an HDMI cable from this port to a

display.

8 HDBaseT IN

Connect to an OPUS series matrix switcher

output, using a 568B terminated cable.

9 LINK

This LED indicator glows solid amber when

an HDMI output is connected and a solid link

is established between the transmitter and

receiver.

10 POWER

This LED indicator glows solid green when the

unit is receiving power from the transmitter.

11 DEBUG

Connect this port to a PC for troubleshooting.

3 64 75 8 9 10 11

Installation Guide

AT-OPUS-RX

RS-232

A 3-pin captive screw connector has been

included for RS-232.

Pin out will be determined by the RS-232 cable

and connect as RX (receive), TX (transmit) and

(Ground).

A 5-pin captive screw connector for IR control has been included. The rst three terminals are IR

inputs to be used with an IR receiver (AT-IR-CS-RX purchased separately through atlona.com),

the last two terminals are for IR outputs to be used with the included IR emitter.

IR OUT is connected by a ground and

signal wire. Use with the included IR

emitter to pass signals to the display

from a control system.

IR IN is connected by a power,

signal, and ground wire. Use with

IR receivers to pass IR signals

back to the transmitter.

IR IN IR OUT

GND S

GND RX TXGNDRX TX

The AT-OPUS-RX includes two mounting brackets and four mounting screws, which can be used

to attach the units to any at surface.

1. Remove the top 2 case screws on the side of the unit.

2. Align the mounting brackets to the side of the units.

3. Use the previously removed case screws to secure the mounting bracket to the enclosure.

4. Repeat the steps for the other side of the unit.

Mounting Instructions

PWR

LINK

RECEIVER

OPUS

Case screws

GNDSP

Especificaciones del producto

Marca:	Atlona
Categoría:	receptor
Modelo:	AT-OPUS-RX
Color del producto:	Zwart
Pantalla incorporada:	Nee
Peso.:	800 g
Ancho:	432 mm
Profundidad:	155 mm
Altura:	44 mm
Manual de usuario:	Ja
red LAN:	Ja
Resolución Máxima:	1280 x 1024 Pixels
Incluye adaptador de CA:	Ja
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	9
Conexión para adaptador de red:	Ja
Conecta y reproduce:	Ja
Tecnología de cableado:	10/100/1000Base-T(X)
Estándar de red:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Soporta Windows:	Ja
Número de usuarios:	1 gebruiker(s)
Soporta el sistema operativo Mac:	Ja
Adaptación externa:	Ja
Compatible con Linux:	Ja
Puerto(s) PS/2:	2
Soporte de conexión en caliente:	Ja
Conexión de vídeo:	VGA
Conexión de teclado:	USB, PS/2
Conexión del ratón:	USB, PS/2
Número de computadoras:	8
Conexiones de audio:	Nee
Intervalo de escaneo:	90 s