Atlona AT-RON-448 Manual de Usario

Atlona receptor AT-RON-448

Lee a continuación 📖 el manual en español para Atlona AT-RON-448 (8 páginas) en la categoría receptor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
Installation Guide
1
AT-RON-448
4K HDR Eight-Output HDMI Distribution Amplier
AT-RON-448
The Atlona Rondo™ series are HDMI distribution ampliers for high dynamic range (HDR)
formats. They are HDCP 2.2 compliant and support 4K/UHD video @ 60 Hz with 4:4:4 chroma
sampling, as well as HDMI data rates up to 18 Gbps. The Rondo series are ideal for applications
requiring the latest as well as emerging 4K/UHD and HDR sources and displays. They are
compatible with all video resolutions, audio formats, and color space formats supported in the
HDMI 2.0a specication, plus the ability to pass metadata for HDR content. The Rondo Series
HDMI distribution ampliers include EDID management features, front panel LED indicators
for power and signal status, and the capability to cascade several units without compromising
performance.
Package Contents
1 x AT-RON-448
1 x 5 V DC power supply
1 x Captive screw connector, 5-pin
2 x Rack ears
4 x Rubber feet
4 x Screws
1 x Installation guide
IMPORTANT: Visit http://www.atlona.com/product/AT-RON-448 for the latest rmware
updates.
Installation Guide
2
AT-RON-448
AT -RON-448 EDID
INT LEARN
1 2 3 4 5 6 7 8
SYNCPOWER
BM
OUT PUT
1234
DC 5V
BACKUP
DC 5V
MAINANALOG S/PDIF
HDMI IN
AT-RO N-448
FW
--
L R
++
5678
1 POWER
This M LED indicator will glow solid
red when the power supply is MAIN
connected. The LED indicator will glow B
solid red when a backup power supply
is connected to the BACKUP power
receptacle.
2 SYNC
This LED indicator will glow solid blue
when an active source is detected on the
HDMI IN port.
3 Output Indicators
These LED indicator will glow solid blue
when a display or other sink device is
connected to the ports.HDMI OUT
4 INT
This LED indicator glows solid blue when
the unit is using the built-in EDID.
5 LEARN
This LED indicator glows solid blue when
the unit is in “EDID learn” mode.
6 EDID button
Press this button to switch between
“internal” and “learn” modes.
7 FW
Connect a mini USB cable to this port to
update the rmware.
8 HDMI IN
Connect an HDMI cable from this port to a
UHD/HD source.
9 ANALOG
Connect the included 5-pin captive screw
connector to this port to de-embed the
input audio to an analog output device.
10 SPDIF
Connect an RCA-type cable from this port
to de-embed the input audio to a digital
output device.
11 HDMI OUT 1 - 8
Connect an HDMI cable from each of
these ports to a display or other sink
device.
12 DC 5V
Two power receptacles are provided:
BACKUP and MAIN. If not using power
supply redundancy, connect the included
power supply to the power MAIN
receptacle. If using a backup power
supply (not included), then connect the
backup power supply from the BACKUP
power receptacle to an electrical outlet
that is on a dierent circuit than the main
power supply. Additional power supplies
can be purchased through Atlona.
31 2 4
6
5
87 910
Panel Descriptions
11 12
Installation Guide
3
AT-RON-448
1. Connect an HDMI cable from the UHD/HD source to the port on the AT-RON-448.HDMI IN
2. Connect up to eight display/sink devices to the ports on the rear panel of the HDMI OUT
AT-RON-448.
3. OPTIONAL: Connect the included 5-pin captive screw connector from the ANALOG port to
the input of an analog output device. Refer to the wiring instructions in the diagram above.
4. OPTIONAL: Connect an RCA-type cable from the SPDIF connector to the digital input of
output device.
5. Connect the included power supply to the power receptacle.DC 5V
Installation
Analog Audio De-Embedding
The AT-RON-448 provides the ability to de-embed two-channel balanced or unbalanced analog
audio on the ANALOG port, using the included 5-pin captive screw connector. This step is
optional.
Use wire strippers to remove enough insulation to allow each wire to be securely fastened to
each terminal of the captive screw connector block and connect the wires as shown.
GND
Side View Side View
-
+
GND
+
-
NOTE: If not using power supply redundancy, connect the included power
supply to the power receptacle. If using a backup power supply (not MAIN
included), then connect the backup power supply from the BACKUP power
receptacle to an electrical outlet that is on a dierent circuit than the main power
supply. Additional power supplies can be purchased through Atlona.
1 2
3
1 2
3
GND GND
+
-+
-
Balanced
Unbalanced

Especificaciones del producto

Marca: Atlona
Categoría: receptor
Modelo: AT-RON-448

¿Necesitas ayuda?

Si necesitas ayuda con Atlona AT-RON-448 haz una pregunta a continuación y otros usuarios te responderán


receptor Atlona Manuales

Atlona

Atlona AT-VGA12A Manual de Usario

3 Septiembre 2024
Atlona

Atlona AT-OPUS-RX Manual de Usario

3 Septiembre 2024
Atlona

Atlona AT-UHD-EX-70-KIT Manual de Usario

3 Septiembre 2024
Atlona

Atlona AT-HDR-CAT-8 Manual de Usario

3 Septiembre 2024
Atlona

Atlona Gain 60 Manual de Usario

3 Septiembre 2024
Atlona

Atlona AT-UHD-EX-100CE-KIT Manual de Usario

3 Septiembre 2024
Atlona

Atlona AT-UHD-EX-100CE-TX Manual de Usario

3 Septiembre 2024
Atlona

Atlona AT-GAIN-120 Manual de Usario

3 Septiembre 2024
Atlona

Atlona AT-PA100-G2 Manual de Usario

3 Septiembre 2024
Atlona

Atlona AT-RON-448 Manual de Usario

3 Septiembre 2024

receptor Manuales

Últimos receptor Manuales

Crown

Crown CDi DriveCore 2|300BL Manual de Usario

27 Octubre 2024
Boss

Boss PT3000 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies PBM120AT Manual de Usario

27 Octubre 2024
Fosi Audio

Fosi Audio V3 Manual de Usario

26 Octubre 2024
Jensen

Jensen CAR710-4BC Manual de Usario

25 Octubre 2024
Onkyo

Onkyo TX-RZ830 Manual de Usario

24 Octubre 2024
Pioneer

Pioneer VSX-1122K Manual de Usario

22 Octubre 2024
Yamaha

Yamaha HTR-5072 Manual de Usario

21 Octubre 2024
NAD

NAD C 355BEE Manual de Usario

20 Octubre 2024
Yamaha

Yamaha RX-A810 Manual de Usario

20 Octubre 2024