Baby Lock Accomplish 2 Manual de Usario
Baby Lock
máquina de coser
Accomplish 2
Lee a continuación 📖 el manual en español para Baby Lock Accomplish 2 (3 páginas) en la categoría máquina de coser. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/3
• Pull up the thread antenna to its highest position. Place the thread
spool on the first spool pin. Pass the thread up through the first
triangular hole on the antenna and then down through eyelet
and around the tension disk.
• Pass the thread through the bobbin winding thread guide as
shown on the machine.
• Bring thread through the top thread notch on the bobbin.
Position bobbin on post.
• Pull latch lever to hold bobbin in place and return it to its
original position.
• Pass thread through the quick bobbin threading device until
the thread is cut.
• Press the bobbin winding clutch up against empty bobbin.
Start winding the bobbin a few rotations, then stop and trim the
extra thread next to the notch on the bobbin.
• Stop the winding process when the bobbin is full, then manually
move the bobbin winding clutch back to its original position.
Remove bobbin and cut the thread.
• To locate the bobbin case, raise the needle plate, lower the
door and place the bobbin inside the bobbin case. Bobbin
should be positioned so it winds to the left. Run the thread
through the thread notch and under latch spring, so that a
length of thread is exposed.
1.
2.
3.
4.
5.
let’s get to the basics
Your machine is out of the box and you have plenty of ideas waiting to get out,
right? Let’s get the basics out of the way. Before you start sewing, you’ll have
to wind a bobbin and then thread your machine. But don’t be intimidated – it’s
easier than you think with Accomplish 2’s friendly features. Once you’ve followed
these quick and easy steps, simply select a stitch and you’re ready to sew!
the bobbin
D02F7J-001
the needle
• Thread through antenna and eyelet as shown in directions.
Thread the tension guide with thread from the top down,
repeating until all three holes are threaded. 1.
2.
3.
4.
5.
• Bring thread down and around the tension assembly,
making sure to catch the tension spring before traveling up
to the take-up lever.
• Bring up the bobbin thread by holding the needle thread
and turning the hand wheel one full rotation towards you.
The bobbin thread will loop around the needle thread. Pull
the loop through to retrieve the bobbin thread.
• Turn handlewheel counterclockwise, or toward you, to
bring needle and take-up lever to the highest position.
Thread take-up lever.
• Lower the presser foot. Pull down the needle threader, bring
the thread around the needle threader and in front of the eye
of the needle.
Especificaciones del producto
| Marca: | Baby Lock |
| Categoría: | máquina de coser |
| Modelo: | Accomplish 2 |
¿Necesitas ayuda?
Si necesitas ayuda con Baby Lock Accomplish 2 haz una pregunta a continuación y otros usuarios te responderán
máquina de coser Baby Lock Manuales
27 Octubre 2024
11 Septiembre 2024
2 Septiembre 2024
31 Agosto 2024
31 Agosto 2024
31 Agosto 2024
30 Agosto 2024
30 Agosto 2024
30 Agosto 2024
30 Agosto 2024
máquina de coser Manuales
- máquina de coser AEG
- máquina de coser Ambiano
- máquina de coser Alfa
- máquina de coser Brother
- máquina de coser Sinbo
- máquina de coser Jata
- máquina de coser Emerio
- máquina de coser Singer
- máquina de coser Bernina
- máquina de coser Pfaff
- máquina de coser Juki
- máquina de coser Elna
- máquina de coser Mellerware
- máquina de coser Termozeta
- máquina de coser Jocca
- máquina de coser Toyota
- máquina de coser Husqvarna
- máquina de coser Bernette
- máquina de coser Janome
- máquina de coser Necchi
- máquina de coser Yamato
- máquina de coser Durkopp Adler
- máquina de coser Kayser
- máquina de coser RCE
- máquina de coser Veritas
- máquina de coser Union Special
- máquina de coser Easy Home
- máquina de coser Vendomatic
- máquina de coser Empisal
- máquina de coser Lewenstein
- máquina de coser Meister Craft
- máquina de coser Yamata
- máquina de coser Weasy
- máquina de coser Victoria
- máquina de coser Prince
- máquina de coser Muller
- máquina de coser Sinojo
- máquina de coser Huskystar
- máquina de coser Gritzner
- máquina de coser W6
- máquina de coser Prixton
- máquina de coser Feiyue
- máquina de coser Husqvarna-Viking
- máquina de coser SteamMax
Últimos máquina de coser Manuales
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
20 Octubre 2024
20 Octubre 2024