Balance Meteo RF-WS101 - 975194 Manual de Usario

Balance Meteo Estación meteorológica RF-WS101 - 975194

Lee a continuación 📖 el manual en español para Balance Meteo RF-WS101 - 975194 (49 páginas) en la categoría Estación meteorológica. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/49
Itemno. 975194
Color Professional Weather station Owner’s Manual
Thank you for purchasing the new generation of professional weather station. Designed and engineered
with the state-of-art technology and components, this instrument will provide accurate and reliable
measurement of wind speed & direction, wind chill, daily/weekly/monthly/accumulated rainfall,
barometric pressure, weather forecast, indoor/outdoor humidity, temperature, heat index & dew point as
well as radio-controlled alarm clock. Read this manual carefully to fully explore the features and
functions of the new product.
In this package you will find:
One monitor (Receiver)
One anemometer (Transmitter – transmit wind & outdoor Channel-1 temperature/humidity data)
One rain gauge (Transmitter – transmit rainfall data)
Mounting hardware for rain gauge (2 sets of screws & plastic screw plugs)
Mounting hardware for anemometer (2 pieces of U-shape metal plate, 4 sets of Hex screws & nuts)
One owner’s’ manual
One 6.0V adapter
Additional tools needed for installation
- Small Phillips screwdriver
- Hexagonal Key
- Electric drill
- Pencil
- Level
- Mast, 1 – 1.25 inch (2.54 – 3.18 cm) in diameter (to mount the anemometer)
Installation
The weather station operates at 433MHz and does not require wire installation among the component
parts. To ensure successful installation and the best performance, we recommend you follow the
installation instructions in the order they appear in this manual.
1. Battery & adapter installation for the monitor (receiver)
Main Power source: Plug in the adapter jack into the back side of the unit for basic operation and
continuous backlight.
1
Backup Power: Open the battery door and insert 3 pieces of AAA batteries according to the polarity
indicated, close the battery cover.
Sea level pressure setting
After battery/adapter installation, the monitor will enter sea level pressure setting mode directly and the
pressure reading will flash. Press “▲” or “▼” to set the sea level pressure value. Press “PRESSURE” to
confirm the setting and exit. This allows the unit to provide a more accurate weather forecast &
pressure reading.
You can also set the sea level pressure any time after the installation is completed. For more
information, see “WEATHER FORECAST & BAROMETRIC PRESSURE” section.
Note: you may obtain the current sea level pressure from the weather web site for your locate area.
2. Selecting a location for the anemometer
Select a mounting location for the anemometer that is:
- Outdoors, not blocked on top or sides, so wind can freely reach the anemometer
- Within 50 meter (164 feet) open area from the monitor. Reduce distance if obstacles is between
the anemometer & the monitor
The best location for the anemometer is usually mounted on a mast in an open area where wind is not
blocked on top or sides, or above roof level on the building where the monitor is located.
Testing the effective transmission range
Before mounting the anemometer, measure the distance between the monitor & anemometer and be
sure it is within the effective transmission range. It is recommended to perform a simple RF
transmission test before mounting.
1) Place the monitor in your selected indoor location and install adapter & batteries (see “Battery &
adapter installation for the monitor” section above)
2) Place the anemometer horizontally in your selected outdoor location. Loosen the screws on the
battery door with a small Phillips screwdriver and open the battery door. Insert 2 pieces of AA
batteries according to the polarity indicated. Close the battery door and tighten the screws.
3) Hold “CHANNEL/SEARCH” button on the monitor for 3 seconds and the wind direction,
temperature & humidity icons will flash on the display. The monitor is now searching for all remote
sensors.
4) If valid wind direction, wind speed and channel-1 temperature/humidity readings are shown on the
monitor within 10 minutes, the RF transmission is successful and the anemometer & monitor are
within the effective transmission.
If above readings are not shown after 10 minutes of searching, the transmission is failed.
Shorten the distance between the anemometer & monitor. Reset the anemometer by removing all
2
batteries from the anemometer & wait for 10 seconds before re-installing the batteries again.
Repeat step 3 & 4 until the transmission is successful.
5) Remove all batteries from the anemometer before mounting and calibration.
NOTE: Whenever the radio-controlled icon is flashing on the display, the weather station is
receiving radio-controlled clock signal and the RF reception for remote sensors will stop temporary for
around 8 minutes. Wait until this icon stops flashing (or disappear) before searching for the remote
sensors.
3. Mounting the anemometer
Important: Before mounting, be sure the monitor & anemometer are within the effective transmission
range.
Note: To mount the anemometer, you need a mast (not supplied) about 1 – 1.25 inches (2.54 – 3.1 cm)
in diameter, and the hardware necessary to fasten it to the mounting location. If you previously installed
such a mast (for mounting antenna, for example), you can mount the anemometer on that mast.
1. If necessary, mount and ground a mast as directed in the instructions provided by the mast.
2. Place the supplied U-shape metal plates around the mast. Insert 4 pieces of the supplied Hex
screws through the holes of the U-shape plates and the holes on the anemometer’s mounting
bracket.
(The wind vane is above the wind cup and the metal bar of the anemometer is in horizontal level)
3. Tighten the supplied Hex nut onto both ends of each screw
4. Calibrating the anemometer & installing batteries
After mounting the anemometer, follow these steps to calibrate the wind direction so that the
anemometer properly measures the wind direction and transmit to the monitor. Be sure battery has
3

Especificaciones del producto

Marca: Balance Meteo
Categoría: Estación meteorológica
Modelo: RF-WS101 - 975194

¿Necesitas ayuda?

Si necesitas ayuda con Balance Meteo RF-WS101 - 975194 haz una pregunta a continuación y otros usuarios te responderán


Estación meteorológica Balance Meteo Manuales

Balance Meteo

Balance Meteo RF-WS31 - 695159 Manual de Usario

21 Agosto 2024
Balance Meteo

Balance Meteo RF-WS21 - 865373 Manual de Usario

16 Agosto 2024
Balance Meteo

Balance Meteo RF-WS101 - 975194 Manual de Usario

16 Agosto 2024

Estación meteorológica Manuales

Últimos Estación meteorológica Manuales

Ascot

Ascot GT-WS-07s Manual de Usario

20 Octubre 2024
Ventus

Ventus K0382 Manual de Usario

18 Octubre 2024
Hyundai

Hyundai WSP 3080 Manual de Usario

15 Octubre 2024
La Crosse Technology

La Crosse Technology V61 Manual de Usario

8 Octubre 2024
Cresta

Cresta WX580M Manual de Usario

6 Octubre 2024
Sencor

Sencor SWS 65 Manual de Usario

5 Octubre 2024
Irox

Irox JKR-1 Manual de Usario

5 Octubre 2024
TFA

TFA 30.5002 Manual de Usario

5 Octubre 2024
TFA

TFA WeatherHub 30.3306.02 Manual de Usario

4 Octubre 2024
Jung

Jung WS10R Manual de Usario

4 Octubre 2024