Barska AX13368 Manual de Usario
Lee a continuación 📖 el manual en español para Barska AX13368 (2 páginas) en la categoría Bóveda. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
User Manual for Key Safe
WARNING
Read all instructions before using this safe.
-Test registered pin code a few times before closing
the safe door.
- Avoid leaving door open and unattended; it will allow
unauthorized individuals to reprogram the safe,
gaining full access to the safe and its contents.
- Store emergency keys in a secure place; NOT inside
of the safe.
- To maximize security and performance of the safe,
test pin code every 6 months.
- Test and make sure the safe works properly before
mounting. Once tested, mount the safe before use.
GETTING STARTED
Remove emergency keys and other included
accessories from packaging.
KEY ACCESS
1. To expose the key access, gently lift off the key cover
2. Use emergency key and insert into key hole, turn key
counter clockwise and turn handle clockwise.
BATTERY
Battery compartment is located on the inside of the door
safe.
1. Remove battery compartment cover.
2. Insert four new AA alkaline batteries into the battery
compartment and restore battery compartment cover.
Note: Do not mix new and old batteries
PIN CODE REGISTRATION
Safe retains only two 3-8 digit pin codes
1st Personal Pin Code
1. With safe open, press and release the initialization
button located on the inside of the safe door. Yellow
indicator light will be on.
2. On the key pad input your 3-8 digit pin code and
press and release either "A" or "B" to confirm. Yellow
indicator light will turn off.
2nd Personal Pin Code
1. On the keypad press “00” then press and release the
initialization button located inside of the safe door.
Yellow indicator light will be on.
2. On the key pad input your 3-8 digit pin code and
press and release either "A" or "B" to confirm. Yellow
indicator light will turn off.
TESTING REGISTERED PIN CODES
1. With safe door open, and the handle/lock knob in the
lock position. Enter in 1st personal pin code on the
key pad and press and release either "A" or "B"
to confirm.
Successful Save
- You will hear 2 short beeps
- The green indicator light will flash
- Move handle to the right to retract bolts
Unsuccessful Save
- You will hear 3 short beeps
- Handle will not move and bolts will stay extended
- Repeat steps CREATING PERSONAL PIN CODES
2. To test 2nd personal pin code, enter in 2nd personal
pin code on the key pad and press and release
either "A" or "B" to confirm. See “Successful Save”
and “Unsuccessful Save” above
3. Test a pin code that is not registered to make sure
the safe does not open to complete testing process
OPENING & CLOSING SAFE WITH PERSONAL PIN
CODES
OPEN:
1. On the key pad enter in either of your 3-8 digit pin
codes and press and release either "A" or "B"
to confirm.
2. Turn the handle/lock knob to the unlock position and
pull the safe door open
NOTE
After entering pin, you have 5 seconds to turn the knob
before the mechanism re-locks automatically
CLOSE:
To close safe, close door and turn knob to the lock
position
LOCK OUT
When the wrong pin code is entered 3 consecutive
times lock out mode will activate for 5 min; safe cannot
be used during this time; please wait or open with
emergency keys.
CHANGING PERSONAL PIN CODES
Follow steps in “PIN CODE REGISTRATION”
See reverse side for more information
855 Towne Center Drive | Pomona, CA 91767
© 2019 BARSKA®
(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com
A. Handle
B. Key Access
C. Indicator Lights
D. Key Pad
E. Key Drop Slot
- Located on the side of the safe
L
o
c
k
U
n
l
o
c
k
E
DCBA
123
456
789
A
0
B
6/19
BC610
LOW BATTERY WARNING
After entering correct personal code and the green and
red indicator lights are flashing this indicates that the
batteries are low. Follow steps in “BATTERIES”
NOTE
Safe may still be opened in low battery state depending
on battery voltage. If safe cannot be opened please use
emergency key. All registered pin codes remain stored
MOUNTING INSTRUCTIONS
The safe may be mounted to a wall. Be aware of the
load bearing. Failure to do so can result in personal
injury and/or damage to property. Use appropriate
tools when performing work and always use eye
protection.
- Do not mount the safe without anchoring to the wall.
- Find the studs in the wall, at your desired location.
Most studs are 16 inches or 24 inches apart.
- Check the wall for concealed wires or pipes.
- Measure the location of the pre-set drill holes; mark
their exact position onto the wall ensuring that the
studs or anything else behind will not interfere.
- Drill the appropriate size holes for the anchors you
are using.
- Carefully press the anchor into the holes at this time.
- Mount the safe by running screws from inside of the
safe and securing to anchors; ensure the safe is
mounted securely.
CARE AND MAINTENANCE
- Keep liquids away from the control panel. Spills on the
control panel will cause damage and possibly
electric shock.
- Secure safe in a proper area to prevent from falling
and causing damage or injury.
- DO NOT disassemble the product. For all repairs,
contact BARSKA Customer Service.
- DO NOT use chemicals or cleaning agents to clean
the safe.
- DO NOT over stuff the contents of the safe, it can
damage the motor mechanism or the contents
- DO NOT place emergency keys inside of safe
6/19
1 YEAR LIMITED WARRANTY
SAFE
BARSKA warrants this new safe to be free of original defects
in material and/or workmanship under normal use for a
period of twelve (12) months from the date product is
received by purchaser. This warranty does not include
damage caused by improper installation or maintenance.
Damage from misuse, abuse, accident (such as dropping),
normal wear and tear, fire, flood, or acts of nature. Damage
from service or repairs other than those performed by
BARSKA. Labor, cost and shipping charges for the removal
and replacement of defective parts beyond the initial
twelve-month warranty period. All transportation and shipping
charges. Removing or altering the seal under any
circumstances will automatically void the warranty.
This warranty is limited to original purchaser and is not
transferable. This warranty applies only to products
purchased in the United States.
Please email info@barska.com or call 1.888.666.6769 for
Return Merchandise Number (RMA#) before any returns. The
RMA number must appear on the outside of the shipping
package. Product must be packed carefully and sturdily in its
original packaging to prevent damage in transit and returned
freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA
products for service and/or replacement:
1. Please write your complete details (Name, Address,
Telephone #, E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order to cover inspection, shipping and
handling. Charges are as follows
$70 - Large
$40 - Standard
BARSKA will examine and test returned product and repair or
replace defective part(s) or units with new part(s) or a new
unit if necessary within the warranty period. Purchaser is
required to remit amount above to BARSKA for return shipping
and handling at time product is returned. If repair is required
after warranty period expiration, purchaser will be
charged for replacement parts and return shipping.
BARSKA® Optics shall not be liable for any consequential,
incidental and/or contingent damages whatsoever. We will
not pay shipping, insurance or transportation charges from
you to us, or any import fees, duties and or taxes. This
warranty supersedes all previous BARSKA® Optics
warranties.
Especificaciones del producto
| Marca: | Barska |
| Categoría: | Bóveda |
| Modelo: | AX13368 |
¿Necesitas ayuda?
Si necesitas ayuda con Barska AX13368 haz una pregunta a continuación y otros usuarios te responderán
Bóveda Barska Manuales
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
Bóveda Manuales
- Bóveda Philips
- Bóveda Honeywell
- Bóveda Abus
- Bóveda Ferm
- Bóveda Salvus
- Bóveda Workzone
- Bóveda Yale
- Bóveda SereneLife
- Bóveda Hard Head
- Bóveda Thule
- Bóveda Dometic
- Bóveda Master Lock
- Bóveda Steren
- Bóveda Perel
- Bóveda Burg-Wachter
- Bóveda SentrySafe
- Bóveda Royal Sovereign
- Bóveda Phoenix
- Bóveda Olympia
- Bóveda Kidde
- Bóveda Topcraft
- Bóveda First Alert
- Bóveda Sygonix
- Bóveda Conrad
- Bóveda Varo
- Bóveda Sentry
- Bóveda Filex
- Bóveda Kreator
- Bóveda Nauta
- Bóveda Jewel
- Bóveda Sistec
- Bóveda Rottner Tresor
- Bóveda Olymp
- Bóveda Protector
- Bóveda Homak Security
- Bóveda NOFIRE
- Bóveda Technomax
- Bóveda Kreator-Varo
- Bóveda M-Locks
- Bóveda Fichero
- Bóveda EasySafe
- Bóveda ROMA
- Bóveda Stamony
Últimos Bóveda Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
20 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024