Bauhn ATAPB-0224 Manual de Usario

Lee a continuación 📖 el manual en español para Bauhn ATAPB-0224 (2 páginas) en la categoría banco de energía. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
C
D
Outputs
Control and Buttons
Have you got everything?
A. Kickstand retracted
B. Kickstand extended
C. USB-C Cable
D. Lightning Cable
E. Lanyard Attachment
F. On/Off Button
Travel Adaptor
Power Bank
A. Travel Adapter Power Bank
B. 4 x Travel plug adapters
C. User Guide
D. Warranty Certicate
E. Travel Kit
F. Carry Strap
User Guide
Model: ATAPB-0224
Travel Adaptor Power Bank
A
F
L
G. LED Display (battery capacity)
H. LED Indicator (power bank status)
I. USB-C input/output
J. USB-A output
K. AC input Plug
L. Wireless Charging
Operation
Power on/off
Press the power button to turn on the power bank, the LED display
will light up and show the remaining power.
Press the power button twice to turn off the power bank.
Charging your devices
Unfold the USB cable (attached), either USB-C or lightning cable
and connect to the port on your device.
You can also use a separate USB-A or USB-C cable (not included) to
charge your mobile devices.
The LED display shows the power remaining as a percentage from
0%-100%. When the remaining power drops lower than 5%, the LED
display starts blinking to display the low power warning.
When the USB-A or USB-C fast charging mode is activated, the LED
indicator will light up red.
When charging multiple devices at same time, the power bank will
exit fast charging mode and it will share charging power to your
connected devices. The red LED indicator will turn off.
Wireless Charging:
When the power bank is switched on, the
LED indicator will light up green which
indicates the wireless charging function is
activated.
Place your smart phone facing up on the wireless charging pad. Make
sure your phone is correctly aligned and has started charging.
Note: If the LED indicator is not green, the power bank may have
entered protection mode. This is due to other devices being
connected to USB-A or USB-C ports in fast charging mode. Press the
power button to quit that fast charging mode to activate the wireless
charging.
If the LED indicator is ashing green, this means an error has occurred.
Either the smart phone does not support wireless charging or other
objects are obstructing the wireless charging pad.
Note: The power bank will automatically quit the wireless charging
mode in 30s to save power if the wireless charging load is too low.
Press the power button again to activate the wireless charging
function.
Charging your power bank
Plug the travel adapter power bank into either mains power or the
USB-C input until fully charged.
Charge for 3-5 hours to fully charge the power bank before use.
Note: Charging time is about 3 hours when using USB-C fast charging
input. It is about 5 hours when using mains power input.
When the USB-C fast charging input activated, the LED indicator
will light red.
If you connect devices to the power bank while it is charging. Power
will be shared and charging time will be extended.
A
Charging
Discharging
Inputs
AC Input USB-C Input
USB-A Output USB-C Output
USB-C Cable Output Lightning Cable Output
C
B
B
B
B
B
E G I J K
B
Install the travel adaptor
plug and slide onto the pins
located at the corner of the
Power bank.
Gently push and slide to
remove and change plugs
FE
D
H
Wireless Output
Device is not charging
Make sure the USB cable is plugged into the output port; unplug the USB
cable and try again.
Try another USB charging cable.
The power bank will turn off automatically when an minimum load (about
80mA) is not detected.
Some devices require a higher outputs to charge. Please check with your
devices specication to conrm compatibility.
The power bank has built-in temperature protect sensor. Keep the power bank
away from heat, high temperatures and direct sunlight.
Wireless charging not
working
Press the power on button to turn the powerbank on.
Check that your smart phone supports wireless charging.
If you have a smart phone case, you must remove when charging.
Ensure your smart phone is facing up and aligned to the centre of the wireless
charging pad, and remove any metal or other objects between the smart
phone and the wireless charging pad.
Cannot charge device
whilst charging power
bank
The power bank does not support supplying power while it is in fast charging
mode. Please wait until the power bank is fully charged or press the power
button to quit fast charging mode..
No LED light when
charging device
Connect the power bank to a power source to ensure the power bank has
sufcient battery.
Capacity drops It is normal for the capacity to slowly drop after a certain number of cycles.
Specications
Input AC 100~240V 50/60Hz 0.3A (Max)
USB-C 5V 3A, 9V 2A, (18W Max) ⎓ ⎓
Battery Li-ion Polymer 3.7V, 10000mAh, 37Wh
Output
USB-C: 5V
3A, 9V
2.22A, 12V
1.67A (20W Max)
USB-A: 5V
3A, 9V⎓2A, 12V
1.5A, (18W Max)
Wireless 5W, 7.5W, 10W, 15W
USB-C Cable: 5V
3A, (15W Max)
Lightning cable: 5V
2.4A
(Total Output: 15W Max if more than 1 output used.)
Dimensions 86 x 86 x 33 mm
Weight 265g
General Safety Warnings
For the safety of yourself and others, follow all instructions and take notice of all the warnings. When
adhered to, these safety precautions can reduce the risk of fire, electric shock and injury.
This product complies with Australian Safety standard AS/NZS 62368.1 to ensure the safety of the product.
The RCM is a visible indication of a product’s compliance with all applicable ACMA
regulatory arrangements, including all technical and record-keeping requirements.
IMPORTANT
Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging
materials are out of their reach.
To prevent environmental factors (dampness, dust,
food, liquid etc.) harming the power bank, only use it
in a well-ventilated, clean and dry environment, away
from excessive heat or moisture.
Keep the product away from direct sunlight or heat
sources.
In case of damage, do not disassemble, repair or
modify the product yourself. Contact After Sales
Support for advice on repair or replacement, or refer
servicing to qualified personnel only.
Children should be supervised to ensure they do not
play with the product.
Do not put any object on top of the product.
Do not place or store appliance where it can fall or
be pulled into a bath or sink.
This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the product by a
person responsible for their safety.
Do not expose the product to microwaves.
Clean using a dry cloth only.
Do not use water or chemicals.
Keep the product away from oils, chemicals or any
other organic liquids.
Use this appliance only for its intended purpose as
described in this guide.
Responsible disposal of the packaging
The packaging of your product has been selected
from environmentally friendly materials and can
usually be recycled. Please ensure these are disposed
of correctly. Plastic wrapping can be a suffocation
hazard for babies and young children, please ensure
all packaging materials are out of reach and are
safely disposed of. Please recycle these materials
rather than throwing them away.
Responsible disposal of the product
At the end of its working life, do not throw this
product out with your household rubbish. An
environmentally friendly method of disposal will
ensure that valuable raw materials can be recycled.
Electrical and electronic items contain materials
and substances which, if handled or disposed of
incorrectly, could potentially be hazardous to the
environment and human health.
Enjoy using your product!
Well done, you made it.
Now sit back and relax... your product is automatically covered by a 1-year warranty.
How nice!
Give us a call
What? You mean this User Guide didnt have ALL the answers? Speak to us!
We’d love to help you get up and running as quickly as possible.
Call our on . After Sales Support 1300 002 534
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Troubleshooting
Travel Adaptor Power Bank
CLASS II - DOUBLE INSULATED
APPLIANCE
This symbol indicates that the appliance
has been designed in such a way that it
does not require a safety connection to
electrical earth (ground).

Especificaciones del producto

Marca: Bauhn
Categoría: banco de energía
Modelo: ATAPB-0224

¿Necesitas ayuda?

Si necesitas ayuda con Bauhn ATAPB-0224 haz una pregunta a continuación y otros usuarios te responderán




banco de energía Bauhn Manuales

banco de energía Manuales

Últimos banco de energía Manuales