Bauknecht WA 4350/1 Manual de Usario

Bauknecht lavadora WA 4350/1

Lee a continuación 📖 el manual en español para Bauknecht WA 4350/1 (36 páginas) en la categoría lavadora. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/36
67
QUICK REFERENCE GUIDE GB
BEFORE USING THE APPLIANCE FOR THE FIRST TIME:
FOLLOW THE “INSTALLATION INSTRUCTIONS”.
REMOVE THE TRANSIT BOLTS BEFORE USING THE APPLIANCE.
First wash cycle without laundry:
1. Turn on the tap.
2. Close the appliance door.
3. Pour a small amount of detergent (about 30 ml) into the detergent dispenser .
4. Select a short program (see programme chart).
5. Press the “On/O button.
This initial cycle serves to eliminate any water remaining after your appliance was tested at
the factory.
NORMAL DAILY USE:
1. Turn on the tap.
2. Sort the wash according to fabric type and colour and load the appliance.
3. Close the door.
4. Put in detergent and any additives required into the dispenser.
5. Select the programme, the temperature and any special options required.
6. Press the “On/O button.
68
GB CONTENTS
INSTALLATION INSTRUCTIONS PAGE 69
APPLIANCE AND ACCESSORIES PAGE 73
CHILD SAFETY PAGE 73
PROTECTING THE ENVIRONMENT PAGE 74
SAFETY INSTRUCTIONS PAGE 74
TRANSPORT / HANDLING PAGE 74
PREPARING THE WASH PAGE 75
DETERGENT AND ADDITIVES PAGE 76
DYEING AND BLEACHING PAGE 77
PROGRAMME SELECTION / PROGRAMME START PAGE 77
DOOR LOCK/ PROGRAMME END PAGE 78
CHANGING / INTERRUPTING /
CLEARING PROGRAMME PAGE 78
REMOVING THE FILTER PAGE 79
DRAINING RESIDUAL WATER PAGE 80
CARE AND MAINTENANCE PAGE 80
TROUBLESHOOTING GUIDE PAGE 81
AFTER-SALES SERVICE PAGE 82
69
Never move the appliance by carrying it at the
worktop.
TRANSIT BOLTS
The appliance is fitted with transit bolts to prevent
internal damage during transport.
Before using the machine you must remove
the transit bolts (Fig. 1).
1. Slacken the four bolts with the wrench
supplied (Fig. 2).
2. Unscrew the bolts by hand.
3. Holding the bolt head, pull each bolt through
the wide part of the holes.
4. Close the holes with the plastic covers supplied;
insert the covers in the wide part of the hole and
slide them toward the narrow part until they click
into place (Fig. 3).
5. Keep the transit bolts for future use.
Important
Whenever the appliance is transported, the transit
bolts must be refitted.
Pry up the plastic covers with a screwdriver, slide
them in the opposite direction to the arrow and
remove. Insert the transit bolts, performing the
steps for removal in reverse order.
INSTALLATION INSTRUCTIONS
Fig. 1
Fig. 2
Fig. 3

Especificaciones del producto

Marca: Bauknecht
Categoría: lavadora
Modelo: WA 4350/1

¿Necesitas ayuda?

Si necesitas ayuda con Bauknecht WA 4350/1 haz una pregunta a continuación y otros usuarios te responderán




lavadora Bauknecht Manuales

lavadora Manuales

Últimos lavadora Manuales