Bauknecht WAE 9491 Manual de Usario

Bauknecht lavadora WAE 9491

Lee a continuación 📖 el manual en español para Bauknecht WAE 9491 (2 páginas) en la categoría lavadora. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
GB WAE 9491 PROGRAMME CHART
5019 401 05286
1) For improved garment care spin speed is restricted to 1000 rpm in this programme.
2) For improved garment care spin speed is restricted to 400 rpm in this programme. M0501
- tested and approved by The Woolmark Company -
Programme Care
Labels
Type of wash/
Degree of soiling
Max.
load
Detergent and Additives Selectable Special Options = Tempe-
rature
Max.
Spin
speed Notes
Softener Main
wash
Pre-
wash
Start
Delay Eco + Pre-
wash
Intensive
Rinse
Rinse
hold
Speed
reduction
Kg Start för-
dröjning Eco+ Förtvätt Extra
Sköljning Skölj-
stopp Centrif. °C rpm
Cotton White /
Hygiene +
Bomull Hygienic+
Normally soiled bed linen, table linen and underwear, towels etc.
made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates
bacteria, ensuring sanitization of your laundry. The bacteria removal
efficiency has been tested following a similar methodology to the NF
EN 13697 standard of Nov. 2001.
6.0 Ye s ❉ ❉ ❉ ❉ 20-95 1400
“Prewash” can be additionally selected for
heavily soiled laundry.
For temperature selection, please respect the
manufacturer’s recommendation on the care
label.
Cotton Colours
Kulörtvätt
Slightly to normally soiled bed linen, table linen and underwear,
towels, shirts etc. made of cotton and linen. 6.0 Ye s ❉ ❉ ❉ ❉ 20-60 1400 “Prewash” can be additionally selected for
heavily soiled laundry.
Synthetics
Syntet
Normally soiled blouses, shirts and other outer clothing made of
polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or
mixtures of these fibres with cotton. 2.5 Ye s ❉ ❉ ❉ ❉ 1) 20-60 1000 1) “Prewash” can be additionally selected for
heavily soiled laundry.
Daily Load
Daglig tvätt Slightly to normally soiled textiles made of cotton and/or
synthetic fibres. 3.0 Ye s – – 20-60 1400 In this programme the spin speed should be
adapted to the fabrics.
Quick Wash
Snabb Hardly worn outer and sports clothing made of cotton, polyester,
polyamid and mixed cotton fabrics. 3.0 Ye s – – 20-30 1400
Delicate
Fintvätt Curtains and delicate dresses, skirts, shirts and blouses. 1.5 Ye s 1) 20-40 1000 1) “Prewash” can be additionally selected for
heavily soiled laundry.
Wool
Ylle
Only woollens with a felt-free finish, labelled with the woolmark
and identified as machine washable.
This programme (40°C) is tested and approved by The
Woolmark Company for machine washable wool.
1.0 Ye s – – 1) 20-40 1000 1) If you select “Rinse Hold” do not leave items to
soak for too long.
Handwash
Handtvätt
Textiles made of linen, silk, wool or viscose marked ashandwashable”.
This programme (4C) is tested and approved by The Woolmark
Company for handwashable wool. 1.0 Ye s – – 2) 20-40 400 2) If you select “Rinse Hold” do not leave items to
soak for too long. A very gentle spin is used in
this programme.
Easy Ironing
Stryka lätt
Normally soiled blouses, shirts and other outer clothing made of
polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or
mixtures of these fibres with cotton. 3.0 Ye s ❉ ❉ ❉ ❉ 1) 20-60 1000 1) To lessen creasing, the water quantity is
increased and the clothes are spun very gently in
this programme.
Spin
Centrifugering 6.0 – – – – 1400 In this programme spinning is intensive. Same as
the spin cycle in the “Cotton” programme.
Rinse & Spin
Sköljning+Centrifugering 6.0 – – – – ❉ ❉ 20 1400 Same as rinsing and spinning in the cotton
programmes.
Rinse & Gentle Spin
Sköljning+Kort centrifugering 1.5 – – – – 1) 20 1000 1) Same as rinsing and spinning in the “Wool”
programme.
Drain
Tömning – – – – – – This programme only drains (alternative method of
terminating the programme after Rinse Hold
without spinning). In addition all running
programmes can be cancelled with this programme.
The Dynamic Intelligence technology always guarantees perfect results with maximum efficiency
whatever the wash load.
BF
I
C
A
D
{
G H
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage and react
appropriately, e.g.:
A. “Pump” indicator
B. “Water tap closed” indicator
Check your washing machine’s water
supply.
C. “Door locked” indicator
D. “Start” button
E. “Start delay” button with time display
F. Programme sequence indicator
G. “Spin Speed Reduction” button
H. Reset button
I. Selectable programmes
J. Temperature selection button
E J
40105286GB.fm Page 1 Thursday, December 29, 2005 4:57 PM
Black process 45.0° 100.0 LPI
5019 401 05286
Add the detergent as described in the chapter
“Detergent and Additives” in the instructions for use.
1. Turn the programme selector knob to the
desired programme.
2. The remaining time display shows the duration
of the chosen programme (in hours and minutes),
and the lamp over the button flashes.“Start
3. The programme sequence indicator and the
predefined spin speed indication corresponding to
the selected programme lights up.
The recommended temperature (see the indicator)
can be altered by pressing the temperature selection
button under the temperature display.
Wash your laundry in the desired programme
(Cotton, Synthetics), adding an appropriate
amount of chlorine bleach to the SOFTENER
chamber (close the detergent dispenser carefully).
Immediately after end of programme, start the “Rinse
and Spinprogramme to eliminate any residual bleach
smell; if you want, you can add softener.
“Eco +” button
With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption can be achieved.
“Prewash” button
Only for heavily soiled laundry (e.g. sand or
granular dirt). Programme duration is increased
by some 15 min.
“Intensive Rinse” button
An additional rinse cycle is carried out.
This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with detergent allergies.
“Rinse Hold” button
The laundry remains in the last rinse water
without being spun: discoloration of the laundry
and additional creasing are prevented.
This option is particularly recommended for the
programme “Synthetic” or “Delicate”.
This function is particularly useful if you want to
postpone spinning to a later time.
Note: The programme has reached the “Rinse
Hold” when the corresponding light flashes.
Terminate the “Rinse Hold” option:
Press the “Rinse Holdbutton again; the
programme will terminate automatically with the
appropriate spin cycle for the current programme.
If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press
the “Start” button again.
“Spin Speed Reduction” button
A maximum spin speed is assigned to each
programme.
Press the button to set another speed for the
spin cycle.
If no light goes on, the final spin is cancelled.
The water is only drained out.
CONSUMPTION DATA *
Programme Temperature
(°C)
Wash
(kg)
Water
(l)
Energy
(kWh)
Programme duration
approx.**
(hours : minutes)
Cotton White/Hygiene+ 95 6.0 49*** 1.90 2:00
Cotton Colours 60 6.0 44 1.14 2:20
Cotton with “Eco +” **** 60 6.0 44 1.02 2:30
Cotton Colours 40 5.0 42 0.70 2:05
Synthetics 60 2.5 60*** 0.90 1:45
Synthetics 40 2.5 55 0.60 1:30
Daily Load 40 3.0 48 0.55 1:00
Quick Wash 30 3.0 37 0.30 0:30
Delicate 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:40
Handwash 30 1.0 45 0.40 0:35
Easy Ironing 40 3.0 60 0.60 1:30
*The consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60456.
** The programme duration may also vary from the chart values. The washing machine is able to allow for particular
household conditions and to adapt the programme run time accordingly.
*** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump
drains the water out.
**** Reference programme for energy label.
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
USING CHLORINE BLEACH
SELECT SPECIAL OPTIONS -
The corresponding lights go on (if not
selectable: rapid flashing for 3 seconds)
With the “Start Delay” function the appliance can be
run cheaply e.g. at night, when the electricity is
cheaper.
Press the “Start Delay” button. Select the
programme start from 1 to 24 hours ahead by
pressing the button again.
Press the button. “Start”
The Start Delay indicator light flashes until the
programme starts.
“Start Delay” correction.
Before “Start” has been pressed:
The preset number of hours can be altered by
continuously pressing the “Start Delay” button.
By pressing the Start Delay button again after the
“24” setting, the time delay can be deleted again
or set again.
After “Start” has been pressed:
The preset number of hours can be reduced by
pressing the “Start Delay” button again; please
note, however, that the washing programme
starts IMMEDIATELY, as soon as you operate it
again with the Start Delay switch 01 setting.
To increase the number of hours preselected,
first turn the programme selector switch to the
Off” position. Then set the programme and the
additional options again and select the desired
number of hours.
After you have selected the programme and eventually
the additional options, the indicator light over the
“Start button flashes. Turn on the tap and start the
programme by pressing the “Start button. Now the
indicator light over the button goes on.
In addition, all programme phases are indicated by the
associated lights. After the end of a programme phase,
the associated indicator light goes out. Thus the
programme sequence indicator moves from left to
right across the wash, rinse and spin phases. At the end
of the programme, only the “End” indicator is still on.
As long as a washing programme is running, the
lamp lights up to show that the door cannot be
opened. When the lamp goes off, the door can be
opened again.
If “Start” has been pressed, but the door is not
latched, the “Door Locked” indicator flashes for 10
seconds. The door must be pushed shut within this
time.
After the 10 seconds, the “Door Locked” indicator
goes out and the “Start” button flashes. The door
must then be opened and closed again and the
“Start” button must be pressed.
“Pump”
Waste water is not pumped out. Check wether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Water Tap”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide" in the
Instructions for Use.
The “End” indicator goes on.
1. Switch the washing machine off by turning the
programme selector to the “O”-position.
2. Turn off the tap.
3. Open the door and unload the machine.
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the “Start” button to interrupt the
programme. The light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish - another
spin speed.
3. Press the button again to restart the “Start”
programme.
If you are in the “Prewash” programme step, this
additional option cannot be deselected as
described (to do this see “Cancel/Reset a
running programme before the end”).
Press the “Reset” button for at least 2 seconds.
Any existing water is drained out before the door
can be opened.
START DELAY
PROGRAMME START
“DOOR LOCKED” INDICATOR
“TROUBLE” INDICATORS
PROGRAMME END
RESELECT AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
40105286GB.fm Page 2 Thursday, December 29, 2005 4:57 PM
Black process 45.0° 100.0 LPI

Especificaciones del producto

Marca: Bauknecht
Categoría: lavadora
Modelo: WAE 9491

¿Necesitas ayuda?

Si necesitas ayuda con Bauknecht WAE 9491 haz una pregunta a continuación y otros usuarios te responderán




lavadora Bauknecht Manuales

lavadora Manuales

Últimos lavadora Manuales