Bauknecht WA Primeline 26TDI Manual de Usario

Bauknecht lavadora WA Primeline 26TDI

Lee a continuación 📖 el manual en español para Bauknecht WA Primeline 26TDI (14 páginas) en la categoría lavadora. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/14

CONTENTS

DEFINITION OF USE

BEFORE USING THE WASHING MACHINE

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

DESCRIPTION OF THE WASHING MACHINE

DOOR

CHILD SAFETY

BEFORE THE FIRST WASH CYCLE

PREPARATION OF THE WASHING

DETERGENTS AND ADDITIVES

REMOVING THE FILTER/DRAINING

RESIDUAL WATER

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

ACCESSORIES

TRANSPORT/HANDLING

ELECTRICAL CONNECTION

GB 2

DEFINITION OF USE

This washing machine is exclusively destined to

wash machine washable laundry in quantities which

are usual for private households.

•Observe the instructions given in these

Instructions for Use and the Programme Chart

when using the washing machine.

•Keep these Instructions for Use and the

Programme Chart; if you pass on the washing

machine to another person, also give him/her

Instructions for Use and Programme Chart.

BEFORE USING THE WASHING MACHINE

1.Removing the packaging and inspection

•After unpacking, make sure that the washing

machine is undamaged. If in doubt, do not use the

washing machine. Contact After-Sales Service or

your local retailer.

•Check that the accessories and supplied parts are

all present.

•Keep the packaging materials (plastic bags,

polystyrene parts, etc.) out of reach of children,

as they are potentially dangerous.

•If the appliance was exposed to the cold prior to

delivery, keep it at room temperature for a few

hours before operating.

2.Remove the transport bolts

•The washing machine is fitted with transport

bolts to avoid any possible damage to the interior

during transport. Before using the machine, it is

imperative that the transport bolts are removed.

•After their removal, cover the openings with the

4 enclosed plastic caps.

3.Install the washing machine

•Remove the protective film from the control panel

(if available on your model).

•Move the appliance without lifting it by the worktop.

•Install the appliance on a solid and level floor

surface, preferably in a corner of the room.

•Make sure that all four feet are stable and resting

on the floor and then check that the washing

machine is perfectly level (use a spirit level).

•In case of wooden or so-called “floating floors”

(for instance certain parquet or laminate floors),

place the appliance on a 60 x 60 cm sheet of

plywood at least 3 cm in thickness which is

secured to the floor.

4.Water inlet

•Connect the water supply inlet hose in

accordance with the regulations of your local

water company.

•Water inlet: Cold water only

(if no other information on

your programme chart)

•Water tap: 3/4” threaded hose

connector

•Water pressure

(flow pressure): 100-1000 kPa (1-10 bar).

•Use only new hoses to connect the washing

machine to the water supply. Used hoses must

not be used and should be discarded.

5.Drain

•Connect the drain hose to the siphon or hook it

over the edge of a sink by means of the “U” bend

supplied.

•If the washing machine is connected to an

integrated drainage system, ensure the latter is

equipped with a vent to avoid simultaneous

loading and draining of water (siphoning effect).

6.Electrical connection

•Electrical connections must be carried out by a

qualified technician in compliance with the

manufacturer’s instructions and current standard

safety regulations.

•Data regarding voltage, power consumption and

protection requirements is given on the inside of

the door.

•The appliance must be connected to the mains by

means of a socket with an earth connection in

accordance with current regulations. The

washing machine must be earthed by law. The

manufacturer declines all liability for damage to

property or injury to persons or animals due to

non-compliance with the directions given above.

•Do not use extension leads or multiple sockets.

•Before any maintenance on the washing machine

disconnect it from the mains supply.

•After installation, access to the mains plug or to

disconnection from mains supply must be

ensured at all times via a double-pole switch.

•Do not operate the washing machine if it has

been damaged during transport. Inform the

After-Sales Service.

•Mains cable replacement is only to be carried out

by After-Sales Service.

•The appliance must only be used in the

household for the prescribed uses.

Minimum housing dimensions:

Width: 600 mm

Height: 850 mm

Depth: 600 mm

GB 3

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

1.Safety instructions

•The washing machine is appropriate for indoor

use only.

•Do not store flammable fluids near the appliance.

•If you want to place a dryer on top of your

washing machine, first contact our After-Sales

Service or your specialist dealer to verify if this is

possible. Placing a dryer on your washing

machine is only admitted if the dryer is fixed on

the washing machine by using an appropriate

stacking kit available through our After-Sales

Service or your specialist dealer.

•Do not leave the appliance plugged in when not

in use.

•Turn off the tap when not in use.

•Before any cleaning and maintenance switch off

the machine or disconnect it from the mains.

•Never open the door forcibly or use it as a step.

•Children must not be allowed to play with the

washing machine or to climb into the drum (see

also the following page chapter “Child Safety”).

•If necessary, the power cable may be replaced

with an identical one obtained from our After-

Sales Service. The power cable must only be

replaced by a qualified technician.

2.Packaging

•The packaging material is entirely recyclable, and

marked with the recycling symbol . Adhere

to current local regulations when disposing of

packaging material.

3.Disposing of packaging and scrapping

old washing machines

•The washing machine is built from reusable

materials. It must be disposed of in compliance

with current local waste disposal regulations.

•Before scrapping, remove all detergent residues

and cut off the power cable so that the washing

machine is made unusable.

•This appliance is marked according to the

European directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly,

you will help prevent potential negative

consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product.

The symbol on the product, or on the

documents accompanying the product, indicates

that this appliance may not be treated as

household waste. Instead it shall be handed over

to the applicable collection point for the recycling

of electrical and electronic equipment.

Disposal must be carried out in accordance with

local environmental regulations for waste disposal.

For more detailed information about treatment,

recovery and recycling of this product, please

contact your local city office, your household

waste disposal service or the shop where you

purchased the product.

4.Energy saving

The water consumption of your washing machine is

optimized; in some programmes you therefore

cannot see the water through the door glass when

the machine is in operation.

•Achieve the best use of energy, water, detergent

and time by using the recommended maximum

load size.

•Do not exceed the detergent dosages indicated

in the manufacturer’s instructions.

•The Eco-Ball - a special system in the outlet - will

prevent detergent loss from the drum to avoid

detergent loss into the environment.

•Use “Prewash” for heavily soiled laundry only!

Save detergent, time, water and energy

consumption by not selecting “Prewash” for

slight to normally soiled laundry.

•Pretreat stains with stain remover or soak dried-

in stains in water before washing to reduce the

necessity of a hot wash programme.

•Save energy by using a 60° C instead of a 95° C

wash programme or a 40° C instead of a 60° C

wash programme.

•Save energy and time by selecting a high spin

speed to reduce the water content in laundry

before using a tumble dryer (for machines with

adjustable spin speed).

5.EC Declaration of Conformity

•The appliance conforms to the following

European Standards:

2006/95/EC Low Voltage Directive

89/336/EEC Electromagnetic Compatibility Directive

Especificaciones del producto

Marca:	Bauknecht
Categoría:	lavadora
Modelo:	WA Primeline 26TDI

¿Necesitas ayuda?

Si necesitas ayuda con Bauknecht WA Primeline 26TDI haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

lavadora Bauknecht Manuales

Bauknecht excellence 2480 Manual de Usario

22 Octubre 2024

Bauknecht WA 8798W Manual de Usario

22 Octubre 2024

Bauknecht WA Platinum 86 DA Manual de Usario

21 Octubre 2024

Bauknecht WA 45550 Manual de Usario

21 Octubre 2024

Bauknecht wad symphony 1200 Manual de Usario

21 Octubre 2024

Bauknecht WAT CARE 30SD Manual de Usario

20 Octubre 2024

Bauknecht wa 7533 Manual de Usario

20 Octubre 2024

Bauknecht WAE 9491 Manual de Usario

20 Octubre 2024

Bauknecht WA Black 714 BW BK Manual de Usario

20 Octubre 2024

Bauknecht wa europa Manual de Usario

18 Octubre 2024

lavadora Manuales

Últimos lavadora Manuales

AEG LTR8C6152A Manual de Usario

27 Octubre 2024

Samsung WW90T534ATW Manual de Usario

27 Octubre 2024

Samsung WW10T754DBX Manual de Usario

27 Octubre 2024

New Pol XF6600EL Manual de Usario

27 Octubre 2024

Zanussi ZR8441WF Manual de Usario

27 Octubre 2024

Philco PLDS 1063 Crown Manual de Usario

27 Octubre 2024

Candy CO 4104TWM/1-S Manual de Usario

27 Octubre 2024

New Pol XS 271EV Manual de Usario

27 Octubre 2024

Corberó CLAV822 Manual de Usario

27 Octubre 2024

Candy CBD485D2CE/1-80 Manual de Usario

27 Octubre 2024