Bellari RP563 Manual de Usario

Bellari No categorizado RP563

Lee a continuación 📖 el manual en español para Bellari RP563 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
RP563
Stereo Tube
Sonic Exciter
Quick Start Guide
ROLLS CORPORATION
SALT LAKE CITY, UTAH
8/13
SPECIFICATIONS
Frequency Response: 20 Hz - 40 kHz
Input Impedance: 10K balanced - 10K unbalanced
THD + Noise: <0.7% typical
Noise Floor: -78 dB
Subwoofer Slope: -18 dB/Octave
Max. Subwoofer Gain: +20 dB
2: Analog VU Meters: (Ref. +4 dBm)
Input/Output jacks: XLR balanced
1/4”: unbalanced
Dimensions: 1.75” X 6” X 19”
(89mm X 162mm X 482mm)
Weight: 6 lbs. (2.72 Kg)
Power: 100-240VAC 25VA
FRONT PANEL DESCRIPTION
SUB FREQUENCY: Sets the highest frequency allowed out of the Sub
Woofer Outputs. This frequency is adjustable between 35Hz and 200
Hz.
SUB LEVEL: Adjusts the output level of the Sub Woofer Outputs. The
level is adjustable between - innity (o) and a gain of + 20 dB.
SUB CLIP LED: When lit, this LED indicates the signal level is 3 dB
below clipping and there may be distortion in the Sub Woofer circuits.
ACTIVE SWITCH: Engages and disengages the RP563. When
out, the unit is bypassed.
BOTTOM: Controls the low frequency cut/boost (at or no cut/boost is at
about 12 o’clock). There is a 0 to 1/2 turn spectrum spread from midrange
to bass with this control as well as amplitude control.
DEFINITION: Controls the amount of sonic clarity and sound spread.
Setting it on 0 is at response and minimal spread, on 10 is maximum
spread and denition.
LEFT/RIGHT LEVEL METERS: Indicates the output level of each channel.
PWR LED: Indicates that the RP563 is connected to an AC outlet, and
the power is turned on.
POWER SWITCH: Controls the primary power to the RP563.
REAR PANEL DESCRIPTION
DC INPUT JACK: For connection to the supplied power adapter.
RIGHT/LEFT XLR OUTPUTS: Balanced outputs for connection a power
amplier or other equipment with XLR line level capabilities.
RIGHT/LEFT 1/4” OUTPUTS: Unbalanced line level outputs.
LEFT/RIGHT 1/4” INPUTS: Unbalanced inputs for connection (normally)
to the last device in the signal chain before the power amplier.
LEFT/RIGHT XLR INPUTS: Balanced line level inputs.
SUB OUTPUT: 1/4” unbalanced output for connection to the Sub Woofer
power amplier.
OPERATION
STEREO CONNECTION
We recommend you put the RP563 last in the signal chain. If you have
an EQ or other processor after your mixer’s main outputs, use the RP563
between it and your power amplier.
If you are connecting the RP563 into a home stereo system, insert the
Sonic Exciter between your signal sources such as tuners, DVD
players, CD players etc. and the power amplier.
CAUTION: TO AVOID POSSIBLE SPEAKER OR AMPLIFIER DAMAGE,
ALWAYS TURN ON THE RP563 AND OTHER PERIPHERAL EQUIPMENT
BEFORE TURNING ON THE POWER AMPLIFIERS. ALSO
TURN OFF THE POWER AMPLIFIERS FIRST, BEFORE TURNING
OFF THE RP563 AND OTHER EQUIPMENT.
The RP563 Stereo Tube Sonic Exciter is a two channel frequency compen-
sation device designed to add life and animation to your sound.
WHAT IS A SONIC EXCITER, AND WHY USE TUBES?
The frequency range that a human ear can detect is roughly 20Hz to
20kHz. However, the frequency response a normal speaker can eectively
reproduce is much, less. Additionally, speakers add distortion
and phase changes that make the sound dierent from that of the
original material.
A sonic exciter restores clarity and presence to the processed signal by
correcting phase changes and harmonic structure dierences. In other
words, it puts the components of the sound back where they belong.
Using a vacuum tube circuit in this conguration not only restores the
clarity lost in previous processes, it adds warmth and a slightly com-
pressed attribute to the program material. This addition to the sonic
exciter process makes the nal sound even larger, cleaner, and clearer.
All of this is done by the use of all-pass ltering, frequency compensated
gain adjustment, and frequency compensated domain delay. What this
means is the elements of sound are fanned out like a deck of cards, mak-
ing each sound more audible and distinct, reducing the need for higher
volumes and radical equalizer adjustment. Because of the unique tube
design, the RP563 also has the benet of natural tube compression. This
makes a more realistic and pleasing sound. With the all class “A” design,
there is enhanced second harmonic content, making the RP563 smooth
and musical.

Especificaciones del producto

Marca: Bellari
Categoría: No categorizado
Modelo: RP563

¿Necesitas ayuda?

Si necesitas ayuda con Bellari RP563 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Bellari Manuales

Bellari

Bellari BT587 Manual de Usario

19 Septiembre 2024
Bellari

Bellari MT502 Manual de Usario

19 Septiembre 2024
Bellari

Bellari VP130 MK2 Manual de Usario

19 Septiembre 2024
Bellari

Bellari RP563 Manual de Usario

18 Septiembre 2024
Bellari

Bellari VP549 Manual de Usario

18 Septiembre 2024
Bellari

Bellari HA543 Manual de Usario

16 Septiembre 2024
Bellari

Bellari SE560 Manual de Usario

16 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024