Blizzard Nexys Flux Manual de Usario

Blizzard No categorizado Nexys Flux

Lee a continuación 📖 el manual en español para Blizzard Nexys Flux (16 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

Blizzard Lighting, LLC

http://www.blizzardpro.com

Waukesha, WI USA

Page 2

TABLE OF CONTENTS

1. Getting Started 3

What’s In The Box? 3

Getting It Out Of The Box 3

Powering Up! 3

Getting A Hold Of Us 3

Safety Instructions 4

2. Meet the Nexys™ Flux 5

Main Features 5

DMX Quick Reference 5

Nexys™ Flux Pin-Up Picture 6

Rear Connections 6

3. Setup 7

Fuse Replacement 7

Connecting A Bunch of Nexys™ Flux Fixtures 7

Data/DMX Cabling 7

Cable Connectors 8

3-Pin??? 5-Pin??? Huh?!? 8

Take It To The Next Level: Setting Up DMX Control 8

Fixture Linking (M/S Mode) 9

Mounting & Rigging 9

Joining Fixtures 9

4. Operating Adjustments 10

The Control Panel 10

Control Panel Menu Structure 11

DMX Values In-Depth 12

5. Appendix 13

Keeping Your Nexys™ Flux As Good As New 13

Returns (Gasp!) 13

Shipping Issues 13

Dimensional Drawings 15

Page 3

1. GETTING STARTED

What’s In The Box?

• Nexys™ Flux LED Fixture

• Power Cord

• 1x Omega Bracket

• 2x Thumbscrews

• This Lovely User Manual

Getting It Out Of The Box

Congratulations on purchasing the Nexys™ Flux. Now that you’ve got your xture, you

should carefully unpack the box and check the contents to ensure that all parts are present

and in good condition. If anything looks as if it has been damaged in transit, notify the

shipper immediately and keep the packing material for inspection. Again, please save the

carton and all packing materials. If a xture must be returned to the factory, it is important

that the xture be returned in the original factory box and packing.

Powering Up!

All xtures must be powered directly o a switched circuit and cannot be run o a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer

channel is used solely for a 0% to 100% switch.

AC Voltage Switch - Not all xtures have a voltage select switch, so please verify that the

xture you receive is suitable for your local power supply. See the label on the xture or

refer to the xture’s specications chart for more information. A xture’s listed current

rating is its average current draw under normal conditions. Check the xture or device

carefully to make sure that if a voltage selection switch exists that it is set to the correct

line voltage you will use.

Warning! Verify that the voltage select switch on your unit matches the line

voltage applied. Damage to your xture may result if the line voltage applied does

not match the voltage indicated on the voltage selector switch. All xtures must

be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, please just visit our website at www.blizzardpro.com/

support and open a support ticket. We’ll be happy to help, honest.

Disclaimer: The information contained in this document are subject to change without notice. Blizzard

Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user

manual. We reserve the right to update the existing, or create a new document to correct any errors or

omissions. You can download the latest version of this document from www.blizzardpro.com.

Author: Date: Last Edited: Date:

J. Thomas 10/27/2023 J. Thomas 11/7/2023

Especificaciones del producto

Marca:	Blizzard
Categoría:	No categorizado
Modelo:	Nexys Flux
Color del producto:	Groen
Peso.:	58 g
Ancho:	80 mm
Profundidad:	90 mm
Altura:	20 mm
Peso del embalaje:	400 g
Ancho del embalaje:	150 mm
Empaquetadura en profundidad:	220 mm
Altura del embalaje:	55 mm
Manual de usuario:	Ja
Certificación:	CE, FCC, WHQL, TAA
Temperatura de almacenamiento:	-20 - 100 °C
Interno:	Ja
Compatible con Linux:	Ja
Tiempo medio entre fallos (MTBF):	87600 uur
Interfaz de host:	PCIe
Controladores suministrados:	Ja
Sistemas operativos de servidor compatibles:	Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Soportes de montaje incluidos:	Ja
Puertos seriales):	4
conjunto de chips:	PLX/Oxford - OXPCIe954
Altura del paquete principal (exterior):	310 mm
Ancho del embalaje principal (exterior):	320 mm
Longitud del paquete principal (exterior):	750 mm
Cantidad por caja principal (exterior):	32 stuk(s)
Temperatura de funcionamiento (TT):	-10 - 80 °C
Humedad relativa de funcionamiento (VV):	5 - 85 procent
Factor de forma de la tarjeta de expansión:	Volledige hoogte / Laag profiel
FIFO (primero en entrar, primero en salir):	128 B
Conectores de alimentación de periféricos (Molex) (4 pines):	1
Interfaz de salida:	Serie
Velocidad en baudios:	460.8 Kbit/s
Soporta EPP y ECP:	Ja