Blizzard Nexys WW Manual de Usario

Lee a continuación 📖 el manual en español para Blizzard Nexys WW (16 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
Blizzard Lighting, LLC
http://www.blizzardpro.com
Waukesha, WI USA
Copyright (c) 2023
Page 2
Nexys™ WW Manual Rev. A © 2023 Blizzard Lighting, LLC
TABLE OF CONTENTS
1. Getting Started 3
What’s In The Box? 3
Getting It Out Of The Box 3
Powering Up! 3
Getting A Hold Of Us 3
Safety Instructions 4
2. Meet the Nexys™ WW 5
Main Features 5
DMX Quick Reference 5
Nexys™ WW Pin-Up Picture 6
Rear Connections 6
3. Setup 7
Fuse Replacement 7
Connecting A Bunch of Nexys™ WW Fixtures 7
Data/DMX Cabling 7
Cable Connectors 8
3-Pin??? 5-Pin??? Huh?!? 8
Take It To The Next Level: Setting Up DMX Control 8
Fixture Linking (M/S Mode) 9
Mounting & Rigging 9
Joining Fixtures 9
4. Operating Adjustments 10
The Control Panel 10
Control Panel Menu Structure 11
DMX Values In-Depth 12
5. Appendix 14
Keeping Your Nexys™ WW As Good As New 14
Returns (Gasp!) 14
Shipping Issues 14
Dimensional Drawings 15
Page 3
Nexys™ WW Manual Rev. A © 2023 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• Nexys™ WW LED Fixture
• Power Cord
• 1x Omega Bracket
• 2x Thumbscrews
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on purchasing the Nexys™ WW. Now that you’ve got your xture, you
should carefully unpack the box and check the contents to ensure that all parts are present
and in good condition. If anything looks as if it has been damaged in transit, notify the
shipper immediately and keep the packing material for inspection. Again, please save the
carton and all packing materials. If a xture must be returned to the factory, it is important
that the xture be returned in the original factory box and packing.
Powering Up!
All xtures must be powered directly o a switched circuit and cannot be run o a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch - Not all xtures have a voltage select switch, so please verify that the
xture you receive is suitable for your local power supply. See the label on the xture or
refer to the xture’s specications chart for more information. A xture’s listed current
rating is its average current draw under normal conditions. Check the xture or device
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your xture may result if the line voltage applied does
not match the voltage indicated on the voltage selector switch. All xtures must
be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, please just visit our website at www.blizzardpro.com/
support and open a support ticket. We’ll be happy to help, honest.
Disclaimer: The information contained in this document are subject to change without notice. Blizzard
Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user
manual. We reserve the right to update the existing, or create a new document to correct any errors or
omissions. You can download the latest version of this document from www.blizzardpro.com.
Author: Date: Last Edited: Date:
J. Thomas 10/23/2023 J. Thomas 11/7/2023

Especificaciones del producto

Marca: Blizzard
Categoría: No categorizado
Modelo: Nexys WW

¿Necesitas ayuda?

Si necesitas ayuda con Blizzard Nexys WW haz una pregunta a continuación y otros usuarios te responderán




No categorizado Blizzard Manuales

No categorizado Manuales

Últimos No categorizado Manuales