Boss Reverb RV-200 Manual de Usario

Boss No categorizado Reverb RV-200

Lee a continuación 📖 el manual en español para Boss Reverb RV-200 (18 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/18
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the Owner’s
Manual (p. 17)). After reading, keep the document(s) where it will be available for immediate reference.
© 2023 Roland Corporation 01
Owners Manual
2
Getting ready
Installing the batteries
Insert the batteries facing the correct way, as shown in the illustration.
* Lo will appear on the display if the batteries are low. Replace them with new ones.
NOTE
¹When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit carefully; do not drop it.
¹If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you carefully observe all of the items related to batteries
that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owners manual (p. 17)).
Attaching the rubber feet
You can attach the rubber feet (included) if necessary.
Attach them in the locations shown in the illustration.
* Using this unit without attaching the rubber feet may damage the oor.
3
1
Display
Shows the reverb time and other values.
2
[TIME] knob
Press the knob to switch between the knobs functions (reverb time mode and memory number mode).
When this unit is in MENU mode, the knob is used to select the parameter and conrm the value (p. 10).
°1
Reverb time mode
Example of reverb time
indication
(when value is 0.1 s)
* This is set to reverb time mode by factory default.
Turn the [TIME] knob to set the reverb time.
To change a value in larger steps, turn the [TIME] knob while
pressing it.
Type Parameter Display
ROOM
0.1–10.0 s
0.1s =0.1
1s = 1.0
10 s = 10.0
HALL
PLATE
SPRING
SHIMMER
ARPVERB
SLOWVERB
MODULATE
LO-FI
GATE
+DELAY 0.01–1.00 s 10 msec =0.01
1 s = 1.00
REVERSE 0.1–1.0 s 0.1 s =0.1
1 s =1.0
NAn N-1
Memory number mode
Example of memory number
indication
(when set to MANUAL or Memory 1)
Turn the [TIME] knob to switch between memory numbers.
NOTE
To edit the reverb time for a memory, press the [TIME] knob once to
switch to reverb time mode and then turn the knob.
When you turn the [TIME] knob while it is in memory number
mode, the memory number changes and the values you were
editing are discarded.
To save a memory you’ve edited, perform the write operation
(p. 9).
Panel descriptions
Top panel
1
2 3 4
5 6 7 8
9
10
11 12
13 14

Especificaciones del producto

Marca: Boss
Categoría: No categorizado
Modelo: Reverb RV-200

¿Necesitas ayuda?

Si necesitas ayuda con Boss Reverb RV-200 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Boss Manuales

No categorizado Manuales

Últimos No categorizado Manuales