Boss Space Echo RE-2 Manual de Usario

Boss No categorizado Space Echo RE-2

Lee a continuación 📖 el manual en español para Boss Space Echo RE-2 (13 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/13
RE-2
Owner’s Manual
Table of contents
2
Table of contents
Panel Descriptions .................................................................. 3
Combining the Playback Heads and Reverb 4.......................
Connecting External Pedals 5.................................................
Various Settings ....................................................................... 6
Turning the Direct Sound Output On/Off ............................ 6
Switching the Direct Sound .................................................. 7
Setting the Operation Mode for the [REPEAT RATE] Knob . 8
Setting the Expression Pedal Function ................................ 9
Specifying the Function of the Pedal Switches ................. 10
Changing the Batteries....................................................... 11
Main Specifications .............................................................. 12
Panel Descriptions
3
Panel Descriptions
Name
Function
1
DC IN jack
Use this jack to connect an AC adaptor (PSA- 100S series, sold separately).
* Use only the specified AC adaptor (sold separately: PSA-S series) and plug it into an AC outlet of the
correct voltage.
* If the AC adaptor is connected while power is on, the power supply is drawn from the AC adaptor.
2
CHECK indicator
This indicator shows whether an effect is ON/OFF, and doubles as the Battery Check indicator.
The indicator lights when an effect is ON.
* The brightness of the CHECK indicator (LED) will dim as the battery lowers. Replace the battery
when the LED is dim or does not light. For details on how to replace, refer to “3. Changing the
Batteries(P.11).”
3
OUTPUT
(A/MONO, B)
jacks
Connect these jacks to your amp or monitor speakers.
Use only the OUTPUT A/MONO jack if using this unit in mono. If you’re using a stereo setup, use the
A/MONO and B jacks. When connected to both the A/MONO and B jacks, the reverb effect is heard in
stereo.
4
INPUT (A/MONO,
B) jacks
Connect your guitar, bass, or effect unit here.
Use the A/MONO jack and B jack when connecting a stereo-output effects unit. Use only the A/MONO
jack if you’re using a mono source.
* The INPUT A jack also operates as the power switch. The power turns on when you insert a plug into
the INPUT A jack.
Turning the power on/off
5
CTL/EXP jack
Using as the CTL jack
You can connect a footswitch (FS- - -5U, FS 6, FS 7; sold separately) to switch between TAP and TWIST effects.
CTL1: Press to set the REPEAT RATE in time with the tempo of the song being played (TAP).
CTL2: Long-press to produce an aggressive sense of rotation (TWIST) that oscillates the echoed sound while you
press.
Using as the EXP jack
Connect an expression pedal (EV 5, etc.; sold separately) to continuously change the effect - -30, Roland EV
settings for the expression pedal’s pushed- - up (horizontal) and pushed down (slanted) positions.
For more about function settings, refer to “2.4. Setting the Expression Pedal Function(P.9 ).”
* Refer to “1.2. Connecting External Pedals(P.5)” for more on footswitch and expression pedal
settings.

Especificaciones del producto

Marca: Boss
Categoría: No categorizado
Modelo: Space Echo RE-2

¿Necesitas ayuda?

Si necesitas ayuda con Boss Space Echo RE-2 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Boss Manuales

No categorizado Manuales

Últimos No categorizado Manuales