BSS Audio DPR-402 Manual de Usario

Lee a continuación 📖 el manual en español para BSS Audio DPR-402 (48 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/48
DPR 402
User Manual
2
This equipment has been tested and found to comply with the following European Standards for
Electromagnetic Compatibility:
Emission Specification: EN55013 (1990) (Associated equipment)
Immunity Specification: EN50082/1 (1992) (RF Immunity, Fast Transients and ESD)
Mains Disturbance: EN61000/3/2 (1995)
For continued compliance ensure that all input and output cables are wired with cable screen connected to Pin
1 of the XLR. The input XLR Pin 1 on BSS equipment is generally connected to chassis via a capacitor to
prevent ground loops whilst ensuring good EMC compatibility.
V3.0 JMK 13 May 1997
We have written this manual with the aim of helping installers, sound engineers and musicians alike get to
grips with the DPR-402 and obtain its maximum capability.
If you are new to BSS products, we recommend that you begin at the start of the manual. If, however, you are
already familiar with the intended application, and just want to get the unit installed without delay, then
follow the highlighted sections.
We welcome any comments or questions regarding the DPR-402 or other BSS products, and you may contact
us at the address or World Wide Web site given in the warranty section.
3
Contents
Contents
1.0 Compressors and Limiters 5
1.1 The need for Gain Control 5
1.2 Compressors and Limiters 6
2.0 The effect of Compression
on sound 7
2.1 Compression 7
2.2 Attack, Release and Ratio 8
3.0 De-essing and Peak Limiting 9
4.0 The BSS DPR-402 9
5.0 Earthing Requirements 10
6.0 Unpacking 11
7.0 Mechanical Installation 14
8.0 Mains Power Connection 15
9.0 Input and Output Connections -
Rear Panel Facilities. 16
9.1 Inputs 16
9.2 Outputs 16
9.3 Stereo Link 17
9.4 Barrier Strip 17
9.5 Peak Limiter Switch 17
10.0 Compression Controls 18
10.1 Threshold 18
10.2 Ratio 18
10.3 Attack Time 19
10.4 Release time 19
10.5 AUTO TIME 20
10.6 GAIN control 20
10.7 BYPASS switch 21
10.8 MODE switch 21
11.0 Compression meters 22
11.1 Below Threshold and Gain Reduction Meter 22
11.2 Output Level Meter and Meter Input Switch 23
11.3 MON S.C. switch 24

Especificaciones del producto

Marca: BSS Audio
Categoría: No categorizado
Modelo: DPR-402

¿Necesitas ayuda?

Si necesitas ayuda con BSS Audio DPR-402 haz una pregunta a continuación y otros usuarios te responderán




No categorizado BSS Audio Manuales

No categorizado Manuales

Últimos No categorizado Manuales