BSS Audio FDS-310 Manual de Usario

Lee a continuación 📖 el manual en español para BSS Audio FDS-310 (40 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/40
FDS 310
User Manual
2
This equipment has been tested and found to comply with the following European Standards for
Electromagnetic Compatibility:
Emission Specification: EN55013 (1990) (Associated equipment)
Immunity Specification: EN50082/1 (1992) (RF Immunity, Fast Transients and ESD)
Mains Disturbance: EN61000/3/2 (1995)
For continued compliance ensure that all input and output cables are wired with cable screen connected to Pin
1 of the XLR. The input XLR Pin 1 on BSS equipment is generally connected to chassis via a capacitor to
prevent ground loops whilst ensuring good EMC compatibility.
V 2.0 JMK 9 August 1996
We have written this manual with the aim of helping installers, sound engineers and musicians to get to grips
with the FDS-310 and obtain its maximum capability.
If you are new to BSS products, we recommend that you begin at the start of the manual. If, however, you are
already familiar with the intended application, and just want to get the unit installed without delay, then
follow the highlighted sections.
We welcome any comments or questions regarding the FDS-310 or other BSS products, and you may contact us
at the address or World Wide Web site given in the warranty section.
3
Contents
Contents
1.0 What is a Crossover? 5
2.0 The difference between Active
and Passive Crossovers 6
3.0 Other advantages 7
4.0 The Linkwitz-Riley advantage 8
5.0 What is special about BSS
Crossovers? 9
6.0 Unpacking 9
7.0 Mechanical Installation 12
8.0 Mains Power Connection 13
9.0 Input Connections 14
9.1 Using Jack Plugs. 14
9.2 Using XLR Plugs. 14
10.0 Output Connections 15
10.1 Using Phone Plugs 15
10.2 Using XLR Plugs 15
11.0 Connection and Setup 16
11.1 Selecting '2-Way' 2 Channel Operation 16
11.2 Selecting '3-Way' Mono Operation 17
11.3 2-Channel Sub-Woofer Operation 18
13.0 Unusual Crossover Points -
for 3-way systems only 19
12.0 Monaural Sub-Woofer Operation -
for stereo 2-way systems only 19
14.0 How to Equalise CD Horns 20
15.0 Full range Output -
3-way operation only 21

Especificaciones del producto

Marca: BSS Audio
Categoría: No categorizado
Modelo: FDS-310

¿Necesitas ayuda?

Si necesitas ayuda con BSS Audio FDS-310 haz una pregunta a continuación y otros usuarios te responderán




No categorizado BSS Audio Manuales

No categorizado Manuales

Últimos No categorizado Manuales