Camille Bauer SIRAX BT5400 Manual de Usario

Lee a continuación 📖 el manual en español para Camille Bauer SIRAX BT5400 (36 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/36
Camille Bauer Metrawatt AG
Aargauerstrasse 7
CH-5610 Wohlen/Switzerland
Tel: +41 56 618 21 11
Fax: +41 56 618 21 21
info@cbmag.com
www.camillebauer.com
Operating Instructions
SIRAX BT5400
Transducer for Active, Apparent, Reactive Power,
Phase Angle and Power Factor
PM 1000291 000 00 Device handbook SIRAX BT5400 2/36
Legal information
Warning notices
In this document warning notices are used, which you have to observe to ensure personal safety and to prevent damage to property. Depending
on the degree of danger the following symbols are used:
Qualifi ed personnel
The product described in this document may be handled by personnel only, which is qualifi ed for the respective task. Qualifi ed personnel have
the training and experience to identify risks and potential hazards when working with the product. Qualifi ed personnel are also able to understand
and follow the given safety and warning notices.
Intended use
The product described in this document may be used only for the application specifi ed. The maximum electrical supply data and ambient con-
ditions specifi ed in the technical data section must be adhered. For the perfect and safe operation of the device proper transport and storage as
well as professional assembly, installation, handling and maintenance are required.
Disclaimer of liability
The content of this document has been reviewed to ensure correctness. Nevertheless it may contain errors or inconsistencies and we cannot
guarantee completeness and correctness. This is especially true for di erent language versions of this document. This document is regularly
reviewed and updated. Necessary corrections will be included in subsequent version and are available via our webpage http://www.camillebauer.
com.
Feedback
If you detect errors in this document or if there is necessary information missing, please inform us via e-mail to:
customer-support@camillebauer.com
If the warning notice is not followed death or severe personal injury result.will
If the warning notice is not followed damage to property or severe personal injury may result.
If the warning notice is not followed the device be damaged or not fulfi ll the expected may may
functionality.
PM 1000291 000 00 Device handbook SIRAX BT5400 3/36
Table of content
1. Introduction ……………………………………………………………………………………………………………4
1.1 Purpose of this document ………………………………………………………………………………………………4
1.2 Scope of supply …………………………………………………………………………………………………………4
1.3 Further documents ………………………………………………………………………………………………………4
2. Safety notes ……………………………………………………………………………………………………………4
3. Device overview ……………………………………………………………………………………………………………5
4. Mechanical mounting ………………………………………………………………………………………………………5
4.1 Mounting ……………………………………………………………………………………………………………5
4.2 Demounting of the device ………………………………………………………………………………………………5
5. Electrical connections …………………………………………………………………………………………………6
5.1 General safety notes ……………………………………………………………………………………………………6
5.2 Cross sections and tightening torques ……………………………………………………………………………………6
5.3 Inputs ……………………………………………………………………………………………………………6
5.4 Power supply …………………………………………………………………………………………………………7
5.5 Connection Diagram ……………………………………………………………………………………………………8
5.6 Modbus interface RS485 …………………………………………………………………………………………………8
6. Commissioning ……………………………………………………………………………………………………………8
6.1 Operating the device …………………………………………………………………………………………………9
6.2 LED indication …………………………………………………………………………………………………………9
6.3 Input and output screens ………………………………………………………………………………………………9
7. Programming ………………………………………………………………………………………………………… 10
7.1 Programming via Front LCD & Two keys ………………………………………………………………………………… 10
7.1.1. Password Protection …………………………………………………………………………………………… 10
7.1.1.1 Password Verifi cation …………………………………………………………………………………… 10
7.1.1.2 Editing Existing Password ………………………………………………………………………………… 11
7.1.2 Transducer Type Selection ………………………………………………………………………………… 12
7.1.3 System Type Selection ………………………………………………………………………………………… 12
7.1.4 Output Type Selection ………………………………………………………………………………………… 12
7.1.4.1 Output 1 Type Selection ………………………………………………………………………………… 12
7.1.4.2 Output 2 Type Selection ………………………………………………………………………………… 13
7.1.5 Potential Transformer Parameter Setting ………………………………………………………………………… 13
7.1.5.1 Potential Transformer primary value ……………………………………………………………………… 13
7.1.5.2 Potential Transformer Secondary Value …………………………………………………………………… 14
7.1.6 Current Transformer Parameter Setting ………………………………………………………………………… 15
7.1.6.1 Current Transformer Primary Value ………………………………………………………………………… 15
7.1.6.2 Current Transformer Secondary Value …………………………………………………………………… 16
7.1.7 Communication Parameter Setting ……………………………………………………………………………… 17
7.1.7.1 Address Setting ………………………………………………………………………………………… 17
7.1.7.2 RS 485 Baud rate ……………………………………………………………………………………… 17
7.1.7.3 RS 485 Parity Selection ………………………………………………………………………………… 18
7.1.8 Input Characteristics Setting …………………………………………………………………………………… 18
7.1.8.1 End value of Input ……………………………………………………………………………………… 18
7.1.9 Output Characteristics Setting …………………………………………………………………………………… 21
7.1.9.1 Output 1 Characteristics Setting ………………………………………………………………………… 21
7.1.9.1.1 End value of output 1 ……………………………………………………………………………… 21
7.1.9.1.2 Start value of output 1 ……………………………………………………………………………… 22
7.1.9.1.3 Elbow value of output 1 ……………………………………………………………………………… 23
7.1.9.2 Output 2 Characteristics Setting ………………………………………………………………………… 24
7.1.9.2.1 End value of output 2 ……………………………………………………………………………… 24
7.1.9.2.2 Start value of output 2 ……………………………………………………………………………… 24
7.1.9.2.3 Elbow value of output 2 ……………………………………………………………………………… 25
7.1.10 Mode Selection ……………………………………………………………………………………………… 26
8. Phasor Diagram ……………………………………………………………………………………………………… 28
9. Programming via the programming connection and the PRKAB5000 programming cable ………………………… 29
9.1. Programming via the RS485 (Modbus) interface ……………………………………………………………………… 29
9.2. DIP Switch Setting for Output ………………………………………………………………………………………… 29

Especificaciones del producto

Marca: Camille Bauer
Categoría: No categorizado
Modelo: SIRAX BT5400

¿Necesitas ayuda?

Si necesitas ayuda con Camille Bauer SIRAX BT5400 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Camille Bauer Manuales

No categorizado Manuales

Últimos No categorizado Manuales