Canon RC-IP1000 Manual de Usario

Canon Cámara de vigilancia RC-IP1000

Lee a continuación 📖 el manual en español para Canon RC-IP1000 (94 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/94
ENGLISH
Remote Camera Controller
User Manual
2
Safety Instructions
Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm
to the operator of the product or others.
In case of emergency (troubleshooting under abnormal
situations)
Installation
• Do not install the product in a location where there is
the risk of ignition or combustion.
Installing the product in a location where flammable
gases are produced or concentrated may cause
ignition and result in fire.
Power supply
Cautions related to the power supply or the power cable
should be followed in the same way when using LAN
cables with PoE power.
• Make sure to turn off the product before connecting/
disconnecting power cables.
• Ensure the power cable is fully inserted into the power
outlet.
• Do not handle the power connector with wet hands.
• Do not unplug the product by pulling the cord.
• Always keep the power connector easily accessible.
Do not place obstructing objects around it.
• Do not expose the power connector or terminal to dirt
or let them come into contact with metallic pins or other
metal objects.
• Do not place heavy objects on the power cable. Do not
damage, break or modify the power cable.
A damaged power cable can lead to fire or electric
shock.
• Periodically wipe the power cable and power terminal
with a dry cloth to remove dust buildup.
• When using DC power supplies, make sure to use a
power cable that is suitable for the installation
conditions (authorized products, environmental
regulations) and conforms to the product's power
specifications.
Using an unsuitable power cable may cause electric
shock and fire.
• Turn off the power when the product is not used for a
long period of time.
Failing to follow the instructions may result in fire or
electric shock.
• Do not leave the product plugged in for extended
periods of time in locations exposed to high levels of
dust, moisture or oily smoke.
Doing so may cause insulation failures and even fires.
• When thunder starts to sound, do not touch the power
cable of connected devices or any connected cables.
Failing to follow the instructions may result in electric
shock.
Handling
• Do not get the product wet. Do not allow liquids or
foreign matter inside the unit.
• Do not expose the product to strong shocks or
vibration.
Maintenance and Inspection
• Turn the power off before cleaning the product using a
dry cloth.
Cleaning it using a wet cloth when the product is
turned on may cause electric shock.
• Do not use organic solvents such as alcohol, benzene
or paint thinner to clean the product.
• Do not disassemble or modify the product.
– Contact with parts inside the product may cause in-
jury or electric shock.
– Foreign objects or dust entering into the product
may cause malfunctions.
– In surroundings exposed to high temperatures and
humidity, humid air entering inside the product may
cause malfunctions.
Important Safety and Handling Instructions
• If smoke, strange smells or abnormal noises are
detected.
• If the product fell and was damaged.
• If foreign objects (metallic objects, liquids, etc.) get
inside the product.
If any of the following situations occurs, immediately
unplug the power cable from the power outlet.
Continuing to use the product under such
circumstances may cause fire or electric shock. Contact
a Canon sales representative as soon as possible.
WARNING Denotes the risk of serious injury or death.
3
Installation
• Do not install the product on an unstable surface or in
locations exposed to severe vibration.
This may cause the product to topple over or fall
down, resulting in injury.
• Do not install the product in locations directly exposed
to salt water or where corrosive gases or oily smoke are
present.
Contact with such substances may corrode and
degrade the mountings, causing the product to fall
down and cause injury.
Handling
• When moving the product, make sure to disconnect the
power connector and any other connected cables.
Damaging the cables may cause fire or electric
shock.
• Do not place heavy objects on top of the product.
Doing so may lead to injury, deformation of the
product, fire or electric shock.
• Do not block the intake/exhaust ventilation outlet.
Doing so may lead to heat building up inside the
product, burns or fire.
Handling Precautions
Installation
• Do not install the product in a location exposed to
direct sunlight or high temperatures.
This may cause malfunctions.
• Do not install the product outdoors.
The product is for indoor use only.
• Do not use or store the product outside the operating
or storage environment.
Failure to do so may result in damage due to the
degradation of image quality or internal components.
• Be sure to connect the ground wire to the GND
terminal.
To prevent electrical shocks caused by electrical
leakage, be sure to connect a ground wire during
installation.
LCD Panel
• Wipe the screen with a soft cloth.
If water droplets get on the screen in an area with
severe temperature difference, or if the screen
becomes dirty, wipe it with a soft dry cloth such as an
eyeglasses cleaning cloth.
• Do not leave the product in places with high
temperatures or humidity for a long time.
This may cause irregularities in the display quality.
• When the same image is displayed for a long time, it
may remain as an afterimage when the image
changes.
This is a characteristic of the LCD panel and is not a
fault. The afterimage may disappear if you display a
different image for a while.
Handling
• Do not hold and lift the product by the PAN / TILT lever.
Do not use excessive force.
This may cause malfunctions.
• Do not connect a PoE power supply LAN cable to the
RS-422 terminal.
This may cause malfunctions.
Disposal
• Dispose of the product according to local laws and
regulations.
• When disposing of the product, initialize it from
SYSTEM menu > [Initialize] (P. 63) in order to delete
settings information such as network settings and
passwords.
CAUTION Follow the cautions below. Otherwise physical
injury or property damage may result.

Especificaciones del producto

Marca: Canon
Categoría: Cámara de vigilancia
Modelo: RC-IP1000

¿Necesitas ayuda?

Si necesitas ayuda con Canon RC-IP1000 haz una pregunta a continuación y otros usuarios te responderán


Cámara de vigilancia Canon Manuales

Canon

Canon RC-IP1000 Manual de Usario

9 Septiembre 2024
Canon

Canon CR-N100 Manual de Usario

8 Septiembre 2024
Canon

Canon VB-S32D Manual de Usario

8 Septiembre 2024
Canon

Canon CR-N700 Manual de Usario

26 Agosto 2024
Canon

Canon CR-X500 2A Manual de Usario

19 Agosto 2024
Canon

Canon CR-X500 1A Manual de Usario

11 Agosto 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024
Vivotek

Vivotek AI-108 Manual de Usario

27 Octubre 2024
Acti

Acti E88 Manual de Usario

27 Octubre 2024
Yale

Yale WIPC-303W Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024
Airlive

Airlive DM-720 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3615W Manual de Usario

27 Octubre 2024
Vivotek

Vivotek IP8133 Manual de Usario

27 Octubre 2024
Olympia

Olympia OC 1280P Manual de Usario

27 Octubre 2024