Cerwin-Vega H4653 Manual de Usario

Cerwin-Vega Vocero H4653

Lee a continuación 📖 el manual en español para Cerwin-Vega H4653 (6 páginas) en la categoría Vocero. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

Cerwin Vega Mobile Speakers

Congratulations for purchasing Cerwin Vega Mobile speakers for your car

audio system. You have chosen Cerwin Vega Mobile because you deserve the best!

Cerwin Vega Mobile speakers are designed and engineered to reproduce

great sound quality for many years of listening enjoyment in your vehicle!

We highly recommend that your new speakers be installed by an

authorized Cerwin Vega Mobile dealer. Your authorized dealer can

professionally assemble/disassemble the interior of your vehicle and set

the proper speaker placement for ideal sound quality.

If you decide to install the speakers by yourself, please thoroughly read

through this manual before getting started. This manual will help

familiarize yourself with these speakers and guide you through the

installation process and procedures.

Please contact your local authorized Cerwin Vega Mobile dealer if you

have any questions regarding the instructions in this manual. If you

require additional assistance, please contact the Cerwin Vega Mobile

Technical Support Department during business hours at 213.261.4161

Thank you for purchasing a Cerwin Vega Mobile product and we hope to provide you with countless hours of listening

enjoyment.

Please take a brief moment to register your new product. By registering your new product, you will receive beneﬁts such as:

- Important product notiﬁcations that may pertain to your purchase.

- Conﬁrmation and record of ownership in case of loss or theft.

- Knowledgeable customer service and technical assistance pertaining to your product.

www.cerwinvegamobile.com.

Registration is voluntary and failure to register will not diminish your limited warranty rights.

Limited Warranty (U.S.A.)

Cerwin Vega Mobile warrants all of our ampliﬁers and speakers to be free of defects in materials and workmanship for a

period of one (1) year.

This warranty is non-transferable and applies only to the original purchaser from an authorized Cerwin Vega Mobile dealer. If

service is required and necessary under this warranty due to manufacturing defect or malfunction, then Cerwin Vega Mobile

will repair and/or replace defective product with either new or remanufactured like product at no charge at our discretion.

Damage to product caused by the following will not be covered under this warranty: abuse, accident, misuse, neglect,

modiﬁcations, repairing attempts, seller/installer misrepresentation.

This warranty does not cover any incidental, consequential, or cosmetic damage due to accidents or normal wear and tear,

nor does it cover the cost of removing or reinstallation of the product.

Warranty is void if the product’s serial number has been removed, defaced, and/or tampered with.

Warranty Procedure:

We recommend that you contact your Cerwin Vega Mobile authorized dealer where your original purchase was made to

initiate all warranty claims. Our authorized dealers can guide you through the warranty procedure to ensure that your claim

will be processed in a timely manner. All warranty returns must be accompanied with a proof of purchase (a copy of the

original sales receipt) and be shipped freight prepaid to our facility with an RA (Return Authorization) number clearly marked

on the outside of the package. Direct returns from consumers or non-authorized dealers will be refused if shipped without a

valid RA number authorized by Cerwin Vega Mobile beforehand.

INTERNATIONAL

Products purchased outside of the U.S.A. are covered only by that country’s distributor and not by Cerwin Vega Mobile U.S.A.

Please Ship All Warranty Claims With Pre-Authorized RA Number To:

CV&DA Holdings, Inc.

ATTN: Customer Service Department

1225 E. 7th St.

Los Angeles, CA 90021 USA

Please Contact Customer Service for Further Warranty Information:

U.S.A.

Tel: 213-261-4161 / Fax: 213-947-4767

Installation

Installing the Speakers

Your new Cerwin Vega Mobile series speakers were designed with the ﬂexibility to be installed in multiple locations. However,

to ensure the best performance possible, it is important to isolate the front sound waves of the speaker from its rear sound

waves. This is done by securely mounting the speaker to a ﬂat surface known as a bafﬂe. Make sure to seal the speaker to

ensure there are no air leaks around its frame.

Selecting a Location

If your vehicle has existing factory locations, the easiest method would be to replace them with the exact same size speaker.

In the case where there is not a factory speaker location, there are many places where the speakers will ﬁt in a vehicle, but

they are not always the best locations for good sound. Make sure to take the time to select the best locations possible.

Mounting the speakers so that they are equal distance from your ears will achieve the best results. If you experience any

difﬁculties, please consult with your local authorized Cerwin-Vega Mobile dealer. They have the tools and know-how to help

Speciﬁcations

H435 3.5" 2-way coaxial speaker set - 150W MAX / 50W RMS POWER HANDLING

H440 4" 2-way coaxial speaker set - 200W MAX / 50W RMS POWER HANDLING

H452 5.25" 2-way coaxial speaker set - 250W MAX / 50W RMS POWER HANDLING

H465 6.5" 2-way coaxial speaker set - 300W MAX / 50W RMS POWER HANDLING

H446 4"X6" 2-way coaxial speaker set - 200W MAX / 50W RMS POWER HANDLING

H4653 6.5" 3-way coaxial speaker set - 320W MAX / 50W RMS POWER HANDLING

H4683 6"X8" 3-way coaxial speaker set - 320W MAX / 50W RMS POWER HANDLING

H4692 6"X9" 2-way coaxial speaker set - 400W MAX / 50W RMS POWER HANDLING

H4693 6"X9" 3-way coaxial speaker set - 420W MAX / 50W RMS POWER HANDLING

H4694 6"X9" 4-way coaxial speaker set - 440W MAX / 50W RMS POWER HANDLING

H4TAK 1" tweeter add-on kit, pair - 300W MAX / 50W RMS POWER HANDLING

H465C 6.5" 2-way component l speaker set - 360W MAX / 50W RMS POWER HANDLING

Door Mounting (if not using factory locations)

Prior to cutting, remove the panel from the door and check for clearance in the in the intended installation area, making sure

the window will go all the way up and down without any interference. Avoid cutting any structural metal support or braces to

mount the speakers. We HIGHLY recommend that for the BEST sound you put a sound deadening mat on the door “skin”

(as shown below). The more “damped” your car is.... the better it will ultimately sound!!!

SOUND DEADENING

Door Mounting

Especificaciones del producto

Marca:	Cerwin-Vega
Categoría:	Vocero
Modelo:	H4653
Peso.:	6.2 g
Ancho:	30 mm
Profundidad:	50 mm
Altura:	6 mm
Ancho del embalaje:	41 mm
Empaquetadura en profundidad:	211 mm
Altura del embalaje:	143 mm
Conexiones:	1x DB 9-pin M\n1x DB 25-pin F
Sistemas operativos compatibles:	Windows 2000, XP (32-bit, 64-bit), Vista (32-bit, 64-bit)
Compatibilidad con Mac:	Nee
Interfaz de host:	PCIe
conjunto de chips:	Oxford OXPCIe952