Chauvin Arnoux C.A 1227 Manual de Usario

Chauvin Arnoux Equipo de medición C.A 1227

Lee a continuación 📖 el manual en español para Chauvin Arnoux C.A 1227 (24 páginas) en la categoría Equipo de medición. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

Thermo-anemometer

EN - User’s manual

C.A 1227

Information or useful tip.

Battery.

Magnet.

The product is declared recyclable following an analysis of the life cycle in accordance with standard ISO 14040.

Chauvin Arnoux has adopted an Eco-Design approach in order to design this appliance. Analysis of the complete life-

cycle has enabled us to control and optimize the e󰀨ects of the product on the environment. In particular this appliance

exceeds regulation requirements with respect to recycling and reuse.

The CE marking certies that the product is in compliance with the requirements applicable in the Union European, in

particular as regards Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility Directive 2014/30/EU, Radio

Equipment Directive 2014/53/EU, and Restriction of Hazardous Substances Directives 2011/65/EU and 2015/863/EU.

The UKCA marking certies that the product is in compliance with the requirements applicable in the United Kingdom

as regards Low Voltage, Electromagnetic Compatibility, and Restriction of Hazardous Substances.

The rubbish bin with a line through it indicates that, in the European Union, the product must undergo selective disposal

in compliance with Directive WEEE 2012/19/EU. This equipment must not be treated as household waste.

PRECAUTIONS FOR USE

This instrument is compliant with safety standard IEC/EN 61010-2-30 or BS EN 61010-2-030, for voltages up to 5V with respect

to ground. Failure to observe the safety instructions may result in electric shock, re, explosion, and destruction of the instrument

and of the installations.

The operator and/or the responsible authority must carefully read and clearly understand the various precautions to be taken in

use. Sound knowledge and a keen awareness of electrical hazards are essential when using this instrument.

Observe the conditions of use, namely the temperature, the relative humidity, the altitude, the degree of pollution, and the place

of use.

Do not use the instrument if it seems to be damaged, incomplete, or poorly close.

Before each use, check the condition of the housing. Any item of which the insulation is deteriorated (even partially) must be set

aside for repair or scrapping.

Always hold the handle of the sensor, and keep your ngers away from the propeller.

All troubleshooting and metrological checks must be done by competent, accredited personnel.

Thank you for purchasing this C.A 1227 thermo-anemometer.

For best results from your instrument:

read these operating instructions carefully,

comply with the precautions for use.

CONTENTS

1. FIRST USE ............................................................................................................................................................................... 4

1.1. Delivery condition 4 ...........................................................................................................................................................

1.2. Accessories .................................................................................................................................................................... 4

1.3. Spare parts 4 .....................................................................................................................................................................

1.4. Inserting the batteries 5 .....................................................................................................................................................

2. PRESENTATION OF THE INSTRUMENT ............................................................................................................................. 6

2.1. C.A 1227 ......................................................................................................................................................................... 6

2.2. Functions of the instrument 7 ............................................................................................................................................

2.3. Function keys 7 .................................................................................................................................................................

2.4. On/O󰀨 key 8 ......................................................................................................................................................................

2.5. Display ............................................................................................................................................................................ 8

3. USE IN STAND-ALONE MODE ............................................................................................................................................. 9

3.1. Air temperature and speed measurement 9 ......................................................................................................................

3.2. Temperature and air ow measurement ....................................................................................................................... 10

3.3. Other functions ..............................................................................................................................................................11

3.4. Recording the measurements ...................................................................................................................................... 12

3.5. Errors 12 ............................................................................................................................................................................

4. USE IN RECORDING MODE ............................................................................................................................................... 13

4.1. Connection 13 ...................................................................................................................................................................

4.2. Get data logger transfer software 13 .................................................................................................................................

4.3. USB link 13 ........................................................................................................................................................................

4.4. Bluetooth link 14 ................................................................................................................................................................

4.5. Data Logger Transfer software 14 .....................................................................................................................................

5. TECHNICAL CHARACTERISTICS ..................................................................................................................................... 17

5.1. Reference conditions .................................................................................................................................................... 17

5.2. Characteristics 17 ..............................................................................................................................................................

5.3. Memory ......................................................................................................................................................................... 18

5.4. USB .............................................................................................................................................................................. 18

5.5. Bluetooth ...................................................................................................................................................................... 18

5.6. Power supply 18 ................................................................................................................................................................

5.7. Environmental conditions 19 .............................................................................................................................................

5.8. Mechanical characteristics ........................................................................................................................................... 19

5.9. Compliance with international standards 19 ......................................................................................................................

5.10. Electromagnetic compatibility (CEM) .......................................................................................................................... 19

6. MAINTENANCE ..................................................................................................................................................................... 20

6.1. Cleaning ....................................................................................................................................................................... 20

6.2. Replacement of batteries .............................................................................................................................................. 20

6.3. Updating the embedded software ................................................................................................................................. 20

7. WARRANTY .......................................................................................................................................................................... 22