PCE Instruments PCE-TUM 50 Manual de Usario

Lee a continuación 📖 el manual en español para PCE Instruments PCE-TUM 50 (16 páginas) en la categoría Equipo de medición. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
PCE-TUM 50 Turbidity Meter
Instruction Manual
1
Introduction
Thank you for selecting the -TUM 50 benchtop turbidity meter. This meter operates on the nephelometric principle of turbidity measurement and is PCE
designed to meet the criteria specified in ISO 7027. This manual provides a step- -step guide to help you operate the meter, please carefully read the by
following instructions before use.
Unpacking
Before unpacking, ensure that the current work environment meet following conditions.
Relative humidity is less than 80 %.
Ambient temperature is greater than 0 and less than 60 . °C °C
No potential electromagnetic and ambient light interference.
The following list describes the standard components of the meter. After the unpacking, please check all components are complete. If any are damaged
or missing, please contact nearest distributor.
1 x Turbidity meter PCE-TUM 50
1 x Cuvette with lid
4 x Calibration cuvettes turbidity
1 x AC Power adapter
1 x Cleaning cloth
1 x User manual
2
Keypad
The PCE-TUM 50 turbidity meter is designed with a 6 key, names and symbols describe each function key controls.
KEY
FUNCTION
ESC
Switches the meter ON/OFF.
Exits the calibration or setting and returns to measurement.
CAL
Starts calibration.
Enters the setup menu (Press and hold the key for 3 seconds).
MI
Stores current reading to memory.
Increase value or scroll up through the menu item.
MR
Views the stored data.
Decrease value or scroll down through the menu item.
ENTER
Confirms the calibration, settings or displayed options.
MEAS
Starts measurement.
Locks the measured value.
Connecting the Power Adapter
Before plugging in the power adapter, ensure that its voltage matches the local main voltage.
Insert the connector of power adapter into the power socket on the rear panel of the meter. The meter is now ready for use.
Switching the Meter On and Off
Press the key to switch on the meter, the display shows the measured value.
Press and hold the key for 3 seconds, the meter will switch off.
Prior to Use
Switch on the meter and allow the meter to warm up for at least 15 minutes.

Especificaciones del producto

Marca: PCE Instruments
Categoría: Equipo de medición
Modelo: PCE-TUM 50

¿Necesitas ayuda?

Si necesitas ayuda con PCE Instruments PCE-TUM 50 haz una pregunta a continuación y otros usuarios te responderán




Equipo de medición PCE Instruments Manuales

Equipo de medición Manuales

Últimos Equipo de medición Manuales