Chief SLB570 Manual de Usario

Chief Accesorio para proyector SLB570

Lee a continuación 📖 el manual en español para Chief SLB570 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8850-000183 RevB

a Duchossois Group Company

05/09

SSB-570, SSM-570, SLB-570 and SLM-570 Interface Brackets

SSB-570, SSM-570, SLB-570 and SLM-570 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place three 1/2" and one 1/4" spacers over four threaded inserts in bottom of projector so heights are equal.

4. Place interface bracket onto bottom of projector and align spacers with mounting holes.

5. Using an M4 x 20mm Phillips pan head screw, an M4 x 25mm Phillips flat head screw and two M4 x 25mm Phillips pan head screws, attach

interface bracket to projector. Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security Screws can be substituted when mounting interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (2) Screw, Phillips Pan Head, Machine, M4 x 25mm****

(4) 10 - 24 Thumb Nuts** (1) Screw, Phillips Flat Head, Machine, M4 x 25mm****

(1) All-Points Security Kit (1) Screw, Phillips Pan Head, Machine, M4 x 20mm****

(3) 1/2" x .194" x 1/2" Round Spacer**** (3) Washer, Flat, M4

(1) 1/2" x .218" x 1/4" Round Spacer****

**Only used when installing SLB/SSB interface brackets. ****Used when mounting surface of projector is recessed.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-570 SLM-570

(

Note: SSB-style inte

)

(

)

Towards front of

projector

Towards front of

projector

Especificaciones del producto

Marca:	Chief
Categoría:	Accesorio para proyector
Modelo:	SLB570
Color del producto:	Zwart
Peso.:	152 g
Ancho:	50 mm
Profundidad:	80 mm
Altura:	21 mm
Peso del embalaje:	398 g
Ancho del embalaje:	142 mm
Empaquetadura en profundidad:	168 mm
Altura del embalaje:	70 mm
Amable:	AV-repeater
Actual:	0.3 A
Modos de vídeo compatibles:	720p, 1080p, 2160p
Resolución Máxima:	3840 x 2160 Pixels
Cables suministrados:	USB
Sistema de audio:	Multikanaal
Incluye adaptador de CA:	Ja
Dimensiones del paquete (AnxPrxAl):	143 x 168 x 63 mm
Certificación:	CE, FCC
Resoluciones de gráficos compatibles:	1280 x 720 (HD 720), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160
Certificados de sostenibilidad:	RoHS
Entrada de video:	DisplayPort
Adaptación externa:	Ja
Montaje en bastidor:	Ja
Canales de salida de audio:	7.1 kanalen
Corriente de salida:	1 A
Dimensiones (Ancho x Fondo x Alto):	50 x 80 x 21 mm
Vídeo apagado:	DisplayPort
Tensión de funcionamiento:	5 V
Altura del paquete principal (exterior):	208 mm
Ancho del embalaje principal (exterior):	310 mm
Longitud del paquete principal (exterior):	426 mm
Cantidad por caja principal (exterior):	12 stuk(s)
Rango-maximo:	20 m
voltaje-de-entrada-de-CA:	100-240 V
Consumo de energía (típico):	5 W
Soporte de audio:	Ja