Citronic U-Pad 170.876UK Manual de Usario

Citronic consola de mezclas U-Pad 170.876UK

Lee a continuación 📖 el manual en español para Citronic U-Pad 170.876UK (9 páginas) en la categoría consola de mezclas. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/9
CSD-series
Compact Mixers with and DSP B/T
Item ref: 170.875 UK
170.876 UK
170.877 UK
User Manual
Version 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
CSD-series Mixers User Manual
Introduction
Thank you for choosing a Citronic CSD-series mixer as part of your professional sound system. This
product has been developed to provide a wide range of facilities for professional and reliable sound
reinforcement. Please read and keep this manual to achieve the best results from your purchase and avoid
damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC
ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If liquids
enter the housing, stop using immediately, allow the unit to dry out and have checked by qualified it
personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –
Safety
• Use the 5Vdc power adaptor supplied or equivalent.
• Avoid ingress of water or particles into any part of the housing. If liquids are spilled on
the console, stop using immediately, allow the unit to dry out and have checked by
qualified personnel before further use
Placement
• Keep the console out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the control surface
• Allow adequate space for airflow and keep the console away from damp or dust .
Cleaning
• Use a soft cloth with a neutral detergent to clean the housing as required.
• A soft brush can be used to clear debris from between controls without damaging them
• Do not use solvents for cleaning the unit.
CSD-series Mixers User Manual
Console layout
Each CSD compact mixing console has a bank of mono input channels which can accept a balanced
microphone input or switchable line/instrument input. There is also a stereo input for playback devices or
line level instruments.
All preamps have studio grade, low noise architecture for the cleanest possible path throughout the signal
chain. Console layout is set out in distinct sections to simplify opera tion.
The following pages of this manual are divided up into these stages to explain the details and function of
each control.
Channel inputs
Channel inputs are provided as XLR or 6.3mm jack on combo sockets.
If an XLR is plugged in, this will be con cted as low impedance (microphone) level. If a 6.3mm plug is ne
used, this will be connected as either line or instrument level (switchable)
The connections for these inputs are assigned as follows.
Mic / Line / Instrument input
1. Combo input Connect a balanced microphone via XLR connection or a line level or
instrument input via 6.3mm plug. An unbalanced XLR can be connected provided that
+48V phantom power is not used. Wired as follows.
Balanced
Pin 1 = Ground
Pin 2 = Signal +
Pin 3 = Signal –
Unbalanced
Pin 1 = Ground
Pin 2 = Signal +
Pin 3 = Ground
2. IMPED switch Press this button in to set the input impedance to instrument level or leave the button in
the up position for a line level input. (instrument level is usually for pickups, such
as those on a guitar. Electronic keyboards usually produce a line level output)
3. +48V phantom Press this button in to enable +48V phantom power to the XLR and the LED indicator
will light. This provides power to some condenser microphones and DI boxes.
Do not use with unbalanced XLR connectors. This does not affect any jack inputs.

Especificaciones del producto

Marca: Citronic
Categoría: consola de mezclas
Modelo: U-Pad 170.876UK

¿Necesitas ayuda?

Si necesitas ayuda con Citronic U-Pad 170.876UK haz una pregunta a continuación y otros usuarios te responderán


consola de mezclas Citronic Manuales

Citronic

Citronic U-Pad 170.876UK Manual de Usario

2 Septiembre 2024
Citronic

Citronic PRO-2 MKII Manual de Usario

1 Septiembre 2024
Citronic

Citronic CDM8:4 mkV Manual de Usario

1 Septiembre 2024
Citronic

Citronic CDM10:4 mk5 Manual de Usario

1 Septiembre 2024
Citronic

Citronic CM4-STUDIO Manual de Usario

1 Septiembre 2024
Citronic

Citronic CSM-6 Manual de Usario

1 Septiembre 2024
Citronic

Citronic CM10-LIVE Manual de Usario

31 Agosto 2024
Citronic

Citronic Z5M Manual de Usario

31 Agosto 2024
Citronic

Citronic CSM-8 Manual de Usario

31 Agosto 2024
Citronic

Citronic CSM-4 Manual de Usario

30 Agosto 2024

consola de mezclas Manuales

Últimos consola de mezclas Manuales

Konig

Konig KN-DIGICON20 Manual de Usario

27 Octubre 2024
Rane

Rane Sixty-Four Manual de Usario

27 Octubre 2024
Wharfedale

Wharfedale SL 1224 USB Manual de Usario

27 Octubre 2024
American Audio

American Audio 14MXR Manual de Usario

23 Octubre 2024
Yamaha

Yamaha MG12XU Manual de Usario

21 Octubre 2024
Yamaha

Yamaha MG 10 Manual de Usario

20 Octubre 2024
Yamaha

Yamaha MG12 Manual de Usario

20 Octubre 2024
Midas

Midas PRO9 Manual de Usario

20 Octubre 2024
American Audio

American Audio Q-D6 Manual de Usario

20 Octubre 2024
Glemm

Glemm MXD 08 Manual de Usario

20 Octubre 2024