Craftsman CMXPTSG1003NB Manual de Usario

Craftsman No categorizado CMXPTSG1003NB

Lee a continuación 📖 el manual en español para Craftsman CMXPTSG1003NB (63 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/63
1/2-in 750-ft-lb Impact Wrench
Clé à chocs de 1/2 po et de 750 lb-pi
Llave de percusión de 1/2 pulg. y 103,69 kgm
CMXPTSG1003NB
IN CT N U D’ I T U D N R NESSTRU IO MAN AL | GUIDE UTIL SA ION | MAN AL E I ST UCCIO
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1 1 WWW.CRA M COM-888-33 -4569 FTS AN.
1
ENGLISH
Components
11/2 in. Impact Wrench
2 Anvil
3Trigger
4Reverse Button
5Forward Button
6Torque Setting Switch
7Air Inlet
Fig. A
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to
hazardous situations and your risk of personal injury or property damage.
DANGER ll: wi Ind cates an y h us sit n wh t ai imminentl azardo uatio ich, oif n voided, result in
death or serious injury.
WARNING could: Ind cates a potentially h us sit n wh t ai azardo uatio ich, oif n voided, result
in .death or serious injury
CAUTION may: Ind cates a potentially h us sit n wh t ai azardo uatio ich, oif n voided, result in
minor or moderate injury.
NOTICE may: Ind cates a practice wh t ai not related to personal injury ich, oif n voided,
result in property damage.
( i u ord ica a l d e.Used w tho t w ) Ind tes a s fety re ate messag
WARNING: Read all safety warnings and all
i i nstruct ons. Fa lilure to fo low the warnings
an nstr ct t d i u i lons may resu in electric shock, fire
a or serious injury.nd/
WARNING: Never mod fy the i product or any
pa . Damage or personal injury could result.rt of it
WARNING: T c i f , e o redu e the r sk o injury read th
instruction manual.
If you have any questions or comments about
this or any product, call CRAFTSMAN toll free
at: 1-888-331-4569.
3
2
54
1
7
6
Specifications
Model CMXPTSG1003NB
Drive 1/2" 12.7 ( mm)
Free Speed 7,000 rpm
Maximum Torque 750 ft.-lbs.
Average Air Consumption 5 scfm
Air Inlet 1/4" npt
Air Hose 3/8" (9.52 mm)
Working Pressure 90 psi
1/2-in 750-ft-lb Impact Wrench
2
ENGLISH
WARNING: Failure to observe and follow safety instructions could result in injury or death.
WARNING: Improper operation or maintenance of this tool could result in serious injury
and property damage. Read and understand all warnings and operation instructions before
using this tool. When using any tool, basic safety precautions should always be followed to
reduce the risk of personal injury. Anticipate and be alert for sudden changes in motion
during startup and operation of any power tool. Do not operate tool if trigger does not turn
the tool on or off. Do not use this tool at heights exceeding 6 feet (2m). Use each tool for its
intended function only. Do not use this product in unsafe work conditions. It is always
recommended to keep a fire extinguisher and first aid kit near work areas.
WARNING: User must also read the compressor manual and follow all compressor safety
instructions
CMXPTSG1003NB
Compressor requirements
5 @ 90 SCFM PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
IMPORTANT: To operate correctly, this tool requires airflow of at least 5 Standard Cubic Feet
per Minute (SCFM) at 90 Pounds per Square Inch (PSI) at the tool. The air hose length could
affect how much air pressure the tool is actually receiving. You may need to adjust the air
pressure higher on the air regulator to achieve the working pressure of 90 PSI.

Especificaciones del producto

Marca: Craftsman
Categoría: No categorizado
Modelo: CMXPTSG1003NB

¿Necesitas ayuda?

Si necesitas ayuda con Craftsman CMXPTSG1003NB haz una pregunta a continuación y otros usuarios te responderán




No categorizado Craftsman Manuales

No categorizado Manuales

Últimos No categorizado Manuales