Crestron Vector SUBS18 Manual de Usario

Crestron Altavoz de subgraves Vector SUBS18

Lee a continuación 📖 el manual en español para Crestron Vector SUBS18 (3 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

VECTOR SUBS18

Vector™ 18” Performance Subwoofer

crestron.com | 800.237.2041

>A professional performance subwoofer for use with Vector™

Performance Loudspeakers

>High-power, long-excursion 18” (457 mm) low-frequency

transducer

>Compact vented enclosure tuned for maximum low-frequency

output

>Delivers superior performance in combination with an Avia™ DSP

>Precisely tuned for articulate, impactful deep bass response

>Ruggedly constructed for maximum reliability

>Concealed M10 mounting points

>Forged shoulder eyebolts available separately

>Neutrik® speakON® input and pass-through connections

The Vector™ SUBS18 is a direct-radiating, vented subwoofer featuring a

single high-power, long-excursion 18” (457 mm) transducer. It is designed

to provide extended low frequency support for use with CS and CD series

Vector Performance Loudspeakers, and is capable of producing articulate

and impactful deep bass response for all types of installed music and

multimedia applications.

The Vector SUBS18 requires use with a Crestron Avia

™ DSP to ensure

rated performance and reliable operation. Its enclosure is optimally

tuned to provide maximum low frequency output in a compact package,

facilitating placement in tight spaces. Concealed M10 mounting points are

included to allow for suspended installation using forged shoulder eyebolts

(sold separately).

SPECIFICATIONS

Performance

Transducer: 18 inch (457 mm) woofer with 4 inch (102 mm) voice coil

and ceramic magnet

Beamwidth: Spherical

Impedance: 8 Ohms nominal

Frequency Range: 25 to 141 Hz (+3/-10 dB)

Power Handling: 1200 Watts based on the AES power handling of the

transducer

Nominal Sensitivity: 100 dB half space, 94 dB whole space, at 1W/1m

using band limited pink noise without processing

Nominal Maximum SPL: Half space: 136 dB peak, 130 dB continuous;

Whole space: 130 dB peak, 124 dB continuous;

Measured at 1200W/1m without processing

Equalized Sensitivity: 98 dB half space, 92 dB whole space, at 1W/1m

using an EIA-426-B signal with processing

Equalized Maximum SPL: Half space: 135 dB peak, 129 dB continuous;

Whole space: 129 dB peak, 123 dB continuous;

Measured at 1200W/1m with processing

Processing & Amplification

Digital Signal Processing: Requires processing using one output

channel of a Crestron Avia DSP, settings provided via model-specific

“Speaker Profiles” in the Avia Audio Tool software (SW-AAT)

Amplification: Requires a single channel of amplification

Recommended Amplifier Power: 1200 to 1800 Watts at 8 Ohms

Connections

Input: (2) Neutrik NL4 speakON 4-pole chassis connectors;

Pins 1 +/–: Speaker input and pass-through;

Pins 2 +/–: Pass-through only

Environmental

For indoor use only

Construction

Enclosure: Void-free, exterior grade Baltic Birch plywood; black

painted finish

Grille: Steel, black powder coat finish

Suspension: (16) M10 eyebolt angle points (eyebolts sold separately)

Dimensions

Height: 29.75 in (756 mm)

Width: 24.55 in (624 mm)

Depth: 19.62 in (498 mm)

VECTOR SUBS18 Vector

™

18” Performance Subwoofer

crestron.com | 800.237.2041

Weight

92.0 lb (41.7 kg)

MODELS & ACCESSORIES

Available Models

VECTOR SUBS18: Vector™ 18” Performance Subwoofer

Available Accessories

VECTOR EB10: M10 Forged Shoulder Eyebolt

VECTOR CONN2: Neutrik® NL2 speakON® 2-Pole Cable Connector

VECTOR CONN4: Neutrik® NL4 speakON® 4-Pole Cable Connector

DSP Series: Avia™ Digital Signal Processors

Notes:

This product may be purchased from an authorized Crestron dealer. To find a dealer, please

contact the Crestron sales representative for your area. A list of sales representatives is available

online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: .patents.crestron.com

Certain Crestron products contain open source software. For specific information, please visit

www.crestron.com/opensource.

Crestron, the Crestron logo, Avia, and Vector are either trademarks or registered trademarks of

Crestron Electronics, Inc. in the United States and/or other countries. Neutrik and speakON are

either trademarks or registered trademarks of Neutrik AG in the United States and/or other

countries. Other trademarks, registered trademarks, and trade names may be used in this

document to refer to either the entities claiming the marks and names or their products. Crestron

disclaims any proprietary interest in the marks and names of others. Crestron is not responsible

for errors in typography or photography. Specifications are subject to change without notice.

Axial Sensitivity (dB SPL, 1W/1m)

Plotted against frequency for a 1 watt swept sine wave, referenced to 1 m without processing

Axial Processed Response (dB)

The axial magnitude response with processing

Impedance (Ohms)

VECTOR SUBS18 Vector

™

18” Performance Subwoofer

Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647

Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1903

www.crestron.com

All brand names, product names and trademarks are the property of their respective owners.

Speciﬁcations subject to change without notice. Revised 06/04/17

1.99 in

51 mm

1.99 in

51 mm

10.25 in

260 mm

19.62 in

498 mm

1.99 in

51 mm

29.75 in

756 mm

24.55 in

624 mm

10.25 in

260 mm

9.75 in

248 mm

1.99 in

51 mm

1.99 in

51 mm

Symbol Key:

= M10 Eyebolt angle point

= CoG

1.99 in

51 mm

14.88 in

378 mm

12.28 in

312 mm

Especificaciones del producto

Marca:	Crestron
Categoría:	Altavoz de subgraves
Modelo:	Vector SUBS18
Color del producto:	Zwart
Consumo-anual-de-energía:	29.7 kWu
Peso del embalaje:	3700 g
Ancho del embalaje:	390 mm
Empaquetadura en profundidad:	107 mm
Altura del embalaje:	570 mm
Clase de eficiencia energética (antigua):	A+
Tipo de embalaje:	Doos
Diagonal de la pantalla:	21.5 "
Resolución:	1920 x 1080 Pixels
Pantalla táctil:	Nee
Relación de aspecto original:	16:9
Ángulo de visión, horizontal:	170 °
Ángulo de visión, vertical:	160 °
Cables suministrados:	AC, VGA
Forma de pantalla:	Flat
Relación de contraste típica:	1000:1
Guía de inicio rápido:	Ja
Puerto(s) VGA (D-Sub):	1
Puerto DVI:	Ja
Altavoces incorporados:	Ja
Energía promedio:	2 W
Consumo de energía (en espera):	0.5 W
Consumo de energía (máx.):	25 W
Número de hablantes:	2
Certificación:	RoHS, WEEE, NOM, TCO, ICES, TUV/GS, ISO 9241-3x Class 2, CE, FCC
Pantalla, número de colores.:	16.78 miljoen kleuren
Consumo de energía (cuando está apagado):	0.5 W
Velocidad máxima de actualización:	60 Hz
tipo HD:	Full HD
Salida de audio:	Ja
Tecnología de visualización:	LED
Tiempo de respuesta:	5 ms
Tamaño de píxel:	0.24825 x 0.24825 mm
Resoluciones de gráficos compatibles:	1920 x 1080 (HD 1080)
Montaje VESA:	Ja
Interfaz de montaje en panel:	75 x 75 mm
Certificados de sostenibilidad:	ENERGY STAR
Brillo (típico):	250 cd/m²
Relación de contraste (dinámica):	1000000:1
Ancho del dispositivo (con soporte):	504 mm
Dispositivo de profundidad (con soporte):	188.62 mm
Altura del dispositivo (con soporte):	382.35 mm
Peso (con soporte):	2600 g
Tipo de retroiluminación:	LED
Temperatura de almacenamiento:	-20 - 60 °C
Tipo de panel:	TN
Área de imagen:	Mat
Tiempo medio entre fallos (MTBF):	30000 uur
Soporte incluido:	Ja
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (típico):	15 W
Temperatura de funcionamiento (TT):	0 - 40 °C
Rango de ángulo de inclinación:	-3 - 18 °
ajustes de inclinación:	Ja