Dahua Technology AX18 Manual de Usario
Lee a continuación 📖 el manual en español para Dahua Technology AX18 (2 páginas) en la categoría Enrutador. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Table 1-1 Indicator description
Solid green Internet a ess available.cc
Solid red Unable to a ess the Internet. (Router connected, but cc
network disconnected. )
Flashes
Connection Diagram
Figure 2-1 Connection dia amgr
DH-AX18
User’s Manual
Website: www.dahuasecurity.com
Address: No. 1399, Binxing Road, Binjiang District, Hangzhou, P. R. China Postcode: 310053
Tel: +86-571-87688888 28933188
Email: dhoverseas@dhvisiontech.com
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Foreword
This manual introduces the installation, functions and operations of the
DH-AX18 device (hereinafter referred to as "the Device"). Read carefully
before using the device, and keep the manual safe for future reference.
Safety Instructions
The following signal words might appear in the manual.
Signal W ords Meaning
Ind ates a high potential haza d wh ch, if not avoided will result in ic r i ,
death or serious injury.
Ind ca es a medium or lowi t potential hazard which, f not avoided, i
could result in s light or moderate injury.
In cates a poten ial risk which f no avoided, c ould result n propertydi t , i t i
damage, data loss reductions in performance or unpredictable , ,
results.
P ov des methods to he p you s o ve a problem or save time. r i l l
Pro des additional information as a s upplement to the textvi .
About the Manual
The manual is for reference only. Slight dierences might be found
between the manual and the product.
We are not liable for losses incurred due to operating the product in
ways that are not in compliance with the manual.
The manual will be updated according to the latest laws and
regulations of related jurisdictions. For detailed information, see
the paper user’s manual, use our CD-ROM, scan the QR code or
visit our ocial website. The manual is for reference only. Slight
dierences might be found between the electronic version and the
paper version.
Upgrade the reader software or try other mainstream reader
●
●
●
●
●There might be errors in the print or deviations in the description of
the functions, operations and technical data. If there is any doubt or
dispute, we reserve the right of nal explanation.
software if the manual (in PDF format) cannot be opened.
This section introduces content covering the proper handling of the
device, hazard prevention, and prevention of property damage. Read
carefully before using the device, and comply with the guidelines when
using it.
●Transport the device under allowed humidity and temperature
conditions. Refer to the technical parameters for requirements on
the transporting temperature and humidity of the device.
Storage Requirements
●Store the device under allowed humidity and temperature
conditions. Refer to the technical parameters for requirements on
the storing temperature and humidity of the device.
Installation Requirements
●Do not connect the power adapter to the device while the adapter
is powered on.
●Strictly comply with the local electrical safety code and standards.
Make sure the ambient voltage is stable and meets the power
supply requirements of the device.
●
Do not leave outdoor models of the device hanging in the air or
facing outwards when installing onto poles that are on top of
buildings.
Do not place the device in a place exposed to sunlight or near
heat sources.
●
●Put the device in a well-ventilated place, and do not block its
ventilation.
Use an adapter or cabinet power supply provided by the
manufacturer.
●
To ensure heat dissipation, the gap between the device and the
surrounding area should not be less than 10 cm on the sides and
10 cm on top of the device.
●
When installing the device, make sure that the power plug and
appliance coupler can be easily reached to cut o power.
●
Voltage stabilizer and lightning surge protector are optional depending
on the actual power supply on site and the ambient environment.
●
Operation Requirements
Do not disassemble the device without professional instruction.
●
Operate the device within the rated range of power input and output.
●
Make sure that the power supply is correct before use.
●
Make sure the device is powered o before disassembling wires to
avoid personal injury.
●
Do not unplug the power cord on the side of the device while the
adapter is powered on.
●
Use the device under allowed humidity and temperature conditions.
●
Operating temperature: 0°C–40 °C (32 °F–104 °F)ns.
●
Do not drop or splash liquid onto the device, and make sure that there
is no object lled with liquid on the device to prevent liquid from
owing into it.
●
Do not block the ventilator of the device with objects, such as a
newspaper, table cloth or curtain.
●
Do not place an open ame on the device, such as a lit candle.
●
Maintenance Requirements
Power o the device before maintenance.●
Mark key components on the maintenance circuit diagram with
warning signs.
●
Port and Indicator
Status Description
Flashes quickly (T=240 ms) for120 s: WPS process.
Flashes slowly (T=2 s) for10 s: Resetting process.
Connect your device to the
router through Ethernet cable.
Connect your device to the
router through wireless.
Connect to modem.
Connect to Internet port.
Modem
Socket
Network port
Power
Ethernet cable
Ethernet cable
Ethernet cable
Ethernet cable
Important Safeguards and Warnings Conguring the Router
3
You can initialize the device and log in to the app to congure the device.
For the rst time use or after the device is restored to its factory
defaults, you need to initialize the device.
●
To protect your device, keep the admin login password safe after
initialization, and change the password regularly.
●
For more details on app conguration, go to Me > User Manual
on WiLynk.
●
3.1.1 Downloading App
Scan the QR code to download the WiLynk app.
Figure 3-1 QR code
You can also search for WiLynk at the app store, and then download it.
3.1.2 Registering Accounts
Procedure
Open WiLynk, tap , and then enter the page.Register Register
Step 2
Step 1
Select the country or region, enter the email address or phone
number, enter the password, and then conrm it.
Step 4
Step 3 Tap the checkbox.I have read and agree
You can click to view the user service agreement and privacy policy.
Phone number is only supported in select countries.
Click Send.
Enter the verication code, and then click OK.
Step 5
Figure 3-2 Registration
3.1.3 Adding Devices
Prerequisites
Make sure that the device is connected with power and modem. After the
device is powered on, wait for 2 minutes, and then add devices.
Procedure
On the page, tap or on the right-upper corner.Status Add Device
Step 1
Step 2 Scan the QR code on the device, or tap of the device, and Select Type
then enter the SN.
Step 4
Step 3 Go to the Wi-Fi settings on your system settings, connect the router
SSID, and then tap Next.
Congure the login password of the device, and then tap Next.
Congure the networking method of the device, and then tap Next.Step 5
Step 6
Step 7
Wait until the screen prompts , and then tap Connect to Internet Next.
Congure the time zone and DST of the device, congure the device
SSID, and then tap to nish the conguration.Next
Figure 3-3 Preparations for adding device Figure 3-4 Add devices Figure 3-7 Network settings Step 8 Enter the page, set Wi-Fi name, password andWLAN Setting
power, and then click .Save
Figure 3-8 WLAN settings
Procedure
Figure 3-6 WAN settings
If you can a ess Internet without any settings on your cc
bandwidth, select DHCP as the networking method.
If your bandwidth cannot obtain IP address automatically,
contact network administrator or bandwidth service provider,
select Static IP as the networking method, and then enter
related information as guided.
If you need to enter the a ount and password to a ess cc cc
Internet, select PPPoE as the networking method, and then enter
bandwidth account and bandwidth passwo .rd
The end device connects to the router through wired
and wireless connection. Enter the device domain name
( ) or device IP( ) to log in dahuawi.com default IP 192.168.10.110
to the device to congure settings.
Step 2 Click OK .
Step 3 Select the I have read and agree to the terms of the Software
License Agreement and Privacy Policy checkbox, and then
click .OK
Step 1
Step 4
Step 5 Enter the login password, and then enter the web page.
Step 6
Step 7 WAN settings: You can change the networking method (default
DHCP), click the to change, and then click .icons Next
Figure 3-5 Congure time zone and Wi-Fi network
3.1 App Conguration
You can initialize the device and log in to it through the device webpage
and WiLynk app.
3.2 Web Conguration
You can initialize the device and log in to it through the device webpage.
For the rst-time login,the device will pop up a setup wizard.
For the rst-time login,you need to set the login password,and then
click .NEXT
●
●
●
WPSWPS LA N1 LAN2 LAN3 WAN DC INRESE T OR
Table 2-1 Rear panel description
1Reset button. Press and hold the button for more than 5
seconds, and then the router will restore its factory defaults.
2
3
Number Description
LAN port. Connects to wired devices such as computers and
set top boxes.
WPS button. Short press for WPS function.
4
WAN port. Connects to the modem or Ethernet port.
5
Power port. Connects to the power supply.
12 3 4 5
●Do not disassemble it unless necessary.
Personnel working at heights must take all necessary measures to
ensure personal safety including wearing a helmet and safety belts.
●
Do not connect the device to two or more kinds of power supplies,
to avoid damage to the device.
●
The device is a class I electrical appliance. Make sure that the power supply
of the device is connected to a power socket with protective earthing.
●
Especificaciones del producto
| Marca: | Dahua Technology |
| Categoría: | Enrutador |
| Modelo: | AX18 |
¿Necesitas ayuda?
Si necesitas ayuda con Dahua Technology AX18 haz una pregunta a continuación y otros usuarios te responderán
Enrutador Dahua Technology Manuales
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
31 Julio 2024
Enrutador Manuales
- Enrutador Samsung
- Enrutador Huawei
- Enrutador HP
- Enrutador Motorola
- Enrutador Topcom
- Enrutador Alcatel
- Enrutador Allnet
- Enrutador Alfa
- Enrutador Allied Telesis
- Enrutador Apple
- Enrutador Airlive
- Enrutador Edimax
- Enrutador Hikvision
- Enrutador Arris
- Enrutador BenQ
- Enrutador Makita
- Enrutador Thomson
- Enrutador Gembird
- Enrutador Black And Decker
- Enrutador Asus
- Enrutador Eminent
- Enrutador Sitecom
- Enrutador Metabo
- Enrutador TP Link
- Enrutador Manhattan
- Enrutador Black Box
- Enrutador Trust
- Enrutador ZTE
- Enrutador Nilox
- Enrutador Hama
- Enrutador AVM
- Enrutador TCL
- Enrutador Gigabyte
- Enrutador Totolink
- Enrutador Cisco
- Enrutador Engenius
- Enrutador KPN
- Enrutador Netis
- Enrutador Digitus
- Enrutador Draytek
- Enrutador Belkin
- Enrutador Devolo
- Enrutador Linksys
- Enrutador Barco
- Enrutador Buffalo
- Enrutador Powerplus
- Enrutador Porter-Cable
- Enrutador Netgear
- Enrutador Nest
- Enrutador LevelOne
- Enrutador BT
- Enrutador Vodafone
- Enrutador ICIDU
- Enrutador Mercusys
- Enrutador Milan
- Enrutador Planet
- Enrutador ZyXEL
- Enrutador Western Digital
- Enrutador Clas Ohlson
- Enrutador Konig
- Enrutador Sweex
- Enrutador Foscam
- Enrutador Zebra
- Enrutador D-Link
- Enrutador Aruba
- Enrutador Tenda
- Enrutador Phicomm
- Enrutador Teltonika
- Enrutador Ubiquiti Networks
- Enrutador Zoom
- Enrutador Kasda
- Enrutador Thrustmaster
- Enrutador Jung
- Enrutador Synology
- Enrutador Trendnet
- Enrutador Mikrotik
- Enrutador ATen
- Enrutador Digi
- Enrutador Verizon
- Enrutador Conceptronic
- Enrutador RGBlink
- Enrutador Gefen
- Enrutador Hawking Technologies
- Enrutador Kopul
- Enrutador Nexxt
- Enrutador Zolid
- Enrutador SPL
- Enrutador Smart-AVI
- Enrutador StarTech.com
- Enrutador Holzmann
- Enrutador SIIG
- Enrutador Advantech
- Enrutador KanexPro
- Enrutador Intelix
- Enrutador Blustream
- Enrutador Intellinet
- Enrutador Lancom
- Enrutador Ubee
- Enrutador Kogan
- Enrutador Ocean Matrix
- Enrutador CradlePoint
- Enrutador Sixnet
- Enrutador Kramer
- Enrutador AVPro Edge
- Enrutador Cudy
- Enrutador F-Secure
- Enrutador Digicom
- Enrutador Sabrent
- Enrutador On Networks
- Enrutador Atlona
- Enrutador AVMATRIX
- Enrutador PENTAGRAM
- Enrutador Nexaira
- Enrutador FSR
- Enrutador Alfatron
- Enrutador Amped Wireless
- Enrutador Avenview
- Enrutador WyreStorm
- Enrutador Mach Power
- Enrutador MuxLab
- Enrutador Comtrend
- Enrutador Premiertek
- Enrutador GL.iNet
- Enrutador A-NeuVideo
- Enrutador Shinybow
- Enrutador Edgewater
- Enrutador Atlantis Land
- Enrutador Lantronix
- Enrutador Lumantek
- Enrutador Keenetic
- Enrutador Starlink
- Enrutador Keewifi
- Enrutador Milesight
- Enrutador PulseAudio
- Enrutador United Telecom
- Enrutador Predator
- Enrutador Comprehensive
- Enrutador Digitalinx
- Enrutador Luxul
- Enrutador Silentwind
- Enrutador Keezel
- Enrutador Wisetiger
Últimos Enrutador Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
24 Octubre 2024
20 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
18 Octubre 2024