Dahua Technology AX30 Manual de Usario

Dahua Technology Enrutador AX30

Lee a continuación 📖 el manual en español para Dahua Technology AX30 (2 páginas) en la categoría Enrutador. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
Table 1-1 Indicator description
So d r nil g ee Configuration complete and the Internet access is normal
Red fla es sh
(slow)
Routing waiting configuration or line anomalies, or the
system booting
The router is pairing with the sub -route; WPS processing
in 120s
System upgrade
The router is powered o or the light is manually turned o
Connection Diagram
Figure 2-1 Connection diagram
DH-AX30
User’s Manual
Website: www.dahuasecurity.com
Address: No. 1399, Binxing Road, Binjiang District, Hangzhou, P. R. China Postcode: 310053
Tel: +86-571-87688888 28933188
Email: dhoverseas@dhvisiontech.com
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Foreword
This manual introduces the installation, functions and operations of the
DH-AX15M device (hereinafter referred to as "the Device"). Read carefully
before using the device, and keep the manual safe for future reference.
Safety Instructions
The following signal words might appear in the manual.
Signal W ords Meaning
Ind ates a high potential haza d wh ch, if not avoided will result in ic r i ,
death or serious injury.
Ind ca es a medium or lowi t potential hazard which, f not avoided, i
could res ult in slight or moderate injury.
In c ates a poten ial risk which f no avoided, could result n propertydi t , i t i
damage, data loss reductions in performance or unpredictable , ,
results.
P ov des methods to he p you so ve a problem or save time. r i l l
Pro des additional information as a supplement to the textvi .
About the Manual
The manual is for reference only. Slight dierences might be found
between the manual and the product.
We are not liable for losses incurred due to operating the product in
ways that are not in compliance with the manual.
The manual will be updated according to the latest laws and
regulations of related jurisdictions. For detailed information, see
the paper user’s manual, use our CD-ROM, scan the QR code or
visit our ocial website. The manual is for reference only. Slight
dierences might be found between the electronic version and the
paper version.
Upgrade the reader software or try other mainstream reader
●
●
●
●
●There might be errors in the print or deviations in the description of
the functions, operations and technical data. If there is any doubt or
dispute, we reserve the right of final explanation.
software if the manual (in PDF format) cannot be opened.
This section introduces content covering the proper handling of the
device, hazard prevention, and prevention of property damage. Read
carefully before using the device, and comply with the guidelines when
using it.
●Transport the device under allowed humidity and temperature
conditions. Refer to the technical parameters for requirements on
the transporting temperature and humidity of the device.
Storage Requirements
●Store the device under allowed humidity and temperature
conditions. Refer to the technical parameters for requirements on
the storing temperature and humidity of the device.
Installation Requirements
●Do not connect the power adapter to the device while the adapter
is powered on.
●Strictly comply with the local electrical safety code and standards.
Make sure the ambient voltage is stable and meets the power
supply requirements of the device.
●
Do not leave outdoor models of the device hanging in the air or
facing outwards when installing onto poles that are on top of
buildings.
Do not place the device in a place exposed to sunlight or near
heat sources.
●
●Put the device in a well-ventilated place, and do not block its
ventilation.
Use an adapter or cabinet power supply provided by the
manufacturer.
●
Do not connect the device to two or more kinds of power supplies,
to avoid damage to the device.
●
To ensure heat dissipation, the gap between the device and the
surrounding area should not be less than 10 cm on the sides and
10 cm on top of the device.
●
When installing the device, make sure that the power plug and
appliance coupler can be easily reached to cut o power.
●
Voltage stabilizer and lightning surge protector are optional depending
on the actual power supply on site and the ambient environment.
●
Operation Requirements
Do not disassemble the device without professional instruction.
●
Operate the device within the rated range of power input and output.
●
Make sure that the power supply is correct before use.
●
Make sure the device is powered o before disassembling wires to
avoid personal injury.
●
Do not unplug the power cord on the side of the device while the
adapter is powered on.
●
Use the device under allowed humidity and temperature conditions.
●
Operating temperature: 0°C–40 °C (14 °F–104 °F)ns.
●
This is a class A product. In a domestic environment this may cause
radio interference in which case you may be required to take
adequate measures.
●
Do not drop or splash liquid onto the device, and make sure that there
is no object filled with liquid on the device to prevent liquid from
flowing into it.
●
Do not block the ventilator of the device with objects, such as a
newspaper, table cloth or curtain.
●
Do not place an open flame on the device, such as a lit candle.
●
Maintenance Requirements
Power o the device before maintenance.●
Mark key components on the maintenance circuit diagram with
warning signs.
●
Indicator
Status Indicator description
Connect your device to the
router through Ethernet cable.
Connect your device to the
router through wireless.
Connect to modem.
Connect to Internet port.
Modem
Network port
Ethernet cable
Ethernet cable
Ethernet cable
Ethernet cable
Important Safeguards and Warnings 3
You can initiali t d ice and log i to to confi h evice.ze he ev n the app gure t e d
For the first time use or after the device is restored to its factory
defaults, you need to initialize the device.
●
To protect your device, keep the admin login password safe after
initialization, and change the password regularly.
●
For more details on app configuration, go to Me > User Manual
on WiLynk.
●
3.1.1 Downloading App
Sca the Qn R o code t download ynk app. the WiL
Figure 3-1 QR code
You can also search W for iL he ppynk t at a sto , and then download it.re
3.1.2 Registering Accounts
Procedure
Open WiLynk, tap Register, and then nter the e Register page.
Step 2
Step 1
Sel t cou ry r r io e email ad ess or honeect he nt o eg n, ent ther dr p
numb e r asswo , and th confirm t.er, nte the p rd en i
Step 4
Step 3 Ta the p I have read and eeagr checkbox.
You can click to t user ser c em and rivacy policy. view he vi e agre ent p
Phone numb is only suppor d sel t countries.er te in ec
Click Send.
En r th rification cod and t n click te e ve e, he OK.
Step 5
Figure 3-2 Registration
3.1.3 Adding Devices
Prerequ esisit
Mak su that th d i i con cted with power and modem After the e re e ev ce s ne .
d i is pow ed on, wai orev ce er t f 2 minutes, and then add d ices.ev
Procedure
On the Status page, tap Add Device or on t r ht-u he ig ppe ner cor r.
Step 1
Step 2 Sc t QR co o th c or p an he de n e devi e, ta Sele pect Ty of the device, and
then ter t en he SN.
Step 4
Step 3 Go o t Wi-F tti n your sy em s tings, connec th router t he i se ngs o st et t e
SSI and then p D, ta Next.
Configur th ogi swor of t devic nd then p e e l n pas d he e, a ta Next.
Configur th tworking m hod of t d ic and then tap e e ne et he ev e, Next.Step 5
Step 6
Step 7
W t untilai th scr prom s e een pt C ne to Interneton ct , and then tap Next.
Configur the time zon d ST h ic configure the device e e an D of t e dev e,
SSI d th tap to finish he con ur ion.D, an en Next t fig at
Figure 3-3 Prep ati s for adding device Figurar on e 3-4 Add devices Figure 3-7 Network settings Step 8 Enter the page, set Wi-Fi name, password andWLAN Setting
power, and then click .Save
Figure 3-8 WLAN settings
Procedure
Figure 3-6 WAN settings
If you can access Internet without any settings on your
bandwidth, select DHCP as the networking method.
If your bandwidth cannot obtain IP address automatically,
contact network administrator or bandwidth service provider,
select Static IP as the networking method, and then enter
related information as guided.
If you need to enter the account and password to access
Internet, select PPPoE as the networking method, and then enter
bandwidth account and bandwidth password.
The end device connects to the router through wired
and wireless connection. Enter the device domain name
( ) or device IP( ) to log in default IP 192.168.10.110
to the device to configure settings.
Step 2 Click OK.
Step 3 Select the I have read and agree to the terms of the Software
License Agreement and Privacy Policy checkbox, and then
click .OK
Step 1
Step 4
Step 5 Enter the login password, and then enter the web page.
Step 6
Step 7 WAN settings: You can change the networking method (default
DHCP), click the to change, and then click .icons Next
Figure 3-5 Configure time zone d Wi-F etworkan i n
3.1
You can initiali t d ice and log i to through tze he ev n it he devi ebpage ce w
and WiLynk app.
3.2
Y can initializ th devic nd log in to it throu th d ice w age.ou e e e a gh e ev ebp
For the first-time login,the device will pop up a setup wizard.
For the first-time login,you need to set the login password,and then
click .NEXT
●
●
●
OR
Table 2-1 ea pan description R r el
1Re on. ess d set butt Pr and hol t on r m he butt fo ore than 5
seconds
2
3
No. Description
LA ort ectsto wired d ce u N p . Conn evi ss ch as co mp teu r nds a
set o o t p b xes.
WP u o or t P unct n .S b tt n. Sh press for W S f io
4
WA ort t o N p . Connec s t the modem or or Et et phern t.
2E202A611V10
34 5
LAN1 LAN2 LAN 3 POWERWAN
Socket
Power
Please select the country or region.
Email/Phone No.
Please configure the password.
It must consi of 2 c acterst 8-3 har s that cont n lettai er numbes, rs
and special characters. Spaces and the following special
charact ers are not allowed ‘ ” : , &
Confirm Password
I have read and agree
User Service Agreement Privacy Policy
Send
OK
Please try again in 56 seconds.
The verification code was sent to 515306230@qq.com
Please find the router, power adapter and ne twork cable.
Use the power adapte r to connect the router and power supply,
and the network cable to c onnect the optical modem and router.
After the router is powered on and the indicator light turns on,
wait for 2 minute s to configure the network.
No devices
Add Device
Time Zone (UTC+08:00) Beijing,Chongqing,Urumql, ...
Time Zone Setting
DST
Successf ully added the device.Please configure the Wi-Fi
network.
Dual-band 2.4/5G
Use the same settings for both 2.4G and 5G. The end device will
choose the one with the better signal.
Wi-Fi Name
DAHUA_531972
Same as the device login password
Power High
Network Settings
1 2 3
Link Detection
4
WLAN Complete
WAN Port List
Network Conne
ction Type IP Address MAC Status Operation
DHCP 00:e0:4c:31:11:8e CONNECTED
* Network Con ction Typene DHCP
I thf e netwo segme s of Wan IP and LAN IP have a conflict,the device cannot access thhe rk nt
network. Please modify the config ation of the network segment for the LAN port.ur
DNS Se ngtti Manually Set DNS
Auto Obtain DNS
Cancel Definite
DefiniteCancel
* Network Con ction Typene Static
I thf e netwo segme s of WAN IP and LAN IP have a conflict,the device cannot accrss therk nt
network. Please modify the config ation of the net work segment f or the LAN port .ur
* IP Address
* Subnet Mask
* ault Gat Def eway
* Preferred DNS
Altemat NSe D
PPPoE
I thf e netwo segme s of WAN IP and LAN IP have a conflict,the device cannot accrss therk nt
network. Please modify the config ation of the net work segment f or the LAN port .ur
Please enter the password
* Network Con ction Typene
* Broadband Account
* Broadband assword P
Network Settings
123
Link ectionDet
4
WLAN Complete
WLAN Password Same as t he device login pa ssword
Dual-band 5G2.4/
Use t he sam settings for both 2e .4G and 5G. Th nd device wille e choose the one with the better signal.
* SSID
2.4G WLAN
If you conn t to t his WLAN, e system willec th us 2e .4 GHz.
* Password
* Power
* SSID
* Password
* Power
P as ntle e e er he t password.
DAHUA_5G_531972
If you conn t to t his WLAN, e system willec th us 5 GHz.e
P as entle e er the password.
High
DAHUA_531972
Network Settings
123
Link ectionDet
4
WLAN Complete
WLAN Password Same as t he device login pa ssword
Dual-band 5G2.4/
Use t he sam settings for both 2e .4G and 5G. Th nd device wille e choose the one with the better signal.
* SSID
* Password
* Power
DAHUA_531972
The system will automat ically hoose t c he bet encyter frequ band.
P as ntle e e er he t password.
High
DefiniteCancel
NextPrevious
Previous Next
Edit
Edit
Edit
High
192.168.12.37
Soi dld re
Red fla es sh
(fast)
O
RESETWPS
12
Po rwe port ects t. Conn o t e ph ower sup ypl
5

Especificaciones del producto

Marca: Dahua Technology
Categoría: Enrutador
Modelo: AX30

¿Necesitas ayuda?

Si necesitas ayuda con Dahua Technology AX30 haz una pregunta a continuación y otros usuarios te responderán


Enrutador Dahua Technology Manuales

Dahua Technology

Dahua Technology AX15M Manual de Usario

10 Septiembre 2024
Dahua Technology

Dahua Technology AX30 Manual de Usario

10 Septiembre 2024
Dahua Technology

Dahua Technology N3 Manual de Usario

10 Septiembre 2024
Dahua Technology

Dahua Technology AX18 Manual de Usario

10 Septiembre 2024
Dahua Technology

Dahua Technology WR5200-IDC Manual de Usario

31 Julio 2024

Enrutador Manuales

Últimos Enrutador Manuales

Airlive

Airlive WLA-500AP Manual de Usario

27 Octubre 2024
AVM

AVM FRITZ!Box 6810 LTE International Manual de Usario

27 Octubre 2024
Netgear

Netgear Nighthawk X6 AC3200 Tri-Band Manual de Usario

27 Octubre 2024
Tenda

Tenda TX12 Manual de Usario

26 Octubre 2024
HP

HP FlexNetwork MSR958 Manual de Usario

24 Octubre 2024
Linksys

Linksys WAG120N Manual de Usario

20 Octubre 2024
TP Link

TP Link Archer AX55 Manual de Usario

19 Octubre 2024
D-Link

D-Link DSL-2640B Manual de Usario

19 Octubre 2024
Eminent

Eminent EM4030 Manual de Usario

18 Octubre 2024
Eminent

Eminent EM4551 Pro Manual de Usario

18 Octubre 2024