Denver TRC-1480 MK2 Manual de Usario

Denver Estación meteorológica TRC-1480 MK2

Lee a continuación 📖 el manual en español para Denver TRC-1480 MK2 (5 páginas) en la categoría Estación meteorológica. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/5
ENG-1
English
INSTRUCTION MANUAL DENVER TRC-1480 MK2
Wireless Indoor and Outdoor Thermometer, Clock and Weather Station
QUICK START GUIDE
1. Slide the battery cover at the ar of your indoor unit open. re
2. Insert 2 x AAA batteries in the battery compartment; observe correct polarity (+/-) as printed
inside the battery compartment.
3. Replace the battery cover. After a few seconds the LCD shows default time, calendar and
current indoor temperature and starts to search for the outdoor temperature signal.
ENG-2
4. Insert 2 x AAA batteries in the outdoor sensor. The outdoor temperature will be displayed with
“CH1” shown on the lower line of the LCD. Your indoor unit is synchronized with the outdoor
sensor on Channel 1; the outdoor temperature is display . ed
Please note:
Your outdoor sensor has a transmission range of 30m with no obstructions. The actual transmission
range can vary, depending on the signal path. Obstructions (roof, walls, floors, ceilings, trees, etc.)
affect the signal range.
SET CALENDAR, 12/24-HOUR FORMAT AND TIME
1. Press and hold SET / ALM SET for 2 seconds, the time digits change to “2008 YR” and start
flashing. Press +/- to set the year.
2. Press SET / ALM SET again, the month digits start flashing. Press +/- to set the month.
3. Press SET / ALM SET again, the date digits start flashing. Press +/- to set the date.
4. - Press SET / ALM SET again, the time digits change to “24 Hr”, press +/ to select “12 Hr” time
format or “24 Hr” time format. When selecting “12 Hr”, the AM / PM icon will be displayed.
5. Press SET / ALM SET again, the time digits “0:00” show and the hour digits start flashing. Press
+/- to set the hours.
6. Press SET / ALM SET again, the minute digits start flashing. Press - button to set the minutes. +/
7. Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return
automatically.
SET ALARM
1. Press SET / ALM SET, the time digits change to the alarm time digits “AM 7:00 AL”. Press and
hold SET / ALM SET for 2 seconds, the hour digits start flashing. Press +/- to set your desired
alarm time hour.
2. Press SET / ALM SET again, the alarm minute digits start flashing. Press +/- to set the alarm
minutes.
3. flashing. Press +/- to set the Press SET / ALM SET again, time digits change to “05” and start
snooze duration between 1 and 20 minutes.
4. Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return
automatically.
TURN ALARM ON OR OFF
Press SET / ALM SET to display the alarm time. When the alarm time is displayed, press + to turn on
/ off the daily alarm. When the alarm function is turned on, the icon appears between the hour and
minute digits.
SNOOZE FUNCTION
When your alarm turns on, the clock sounds a beep to wake you up. The icon starts flashing.
1. Press SNOOZE to stop the alarm temporarily, the icon keeps flashing. The alarm will beep
again after 5 minutes.
2. Press + / CHANNEL (ALM On-Off) to stop the alarm, the alarm beep will stop and the icon
illuminates; the alarm will beep again at the same time the next day.
Alarm Duration: 2 minutes.
DISPLAY TEMPERATURE IN DEGREES C OR F
Press (°C/°F) to display the temperature in degrees Celsius or Fahrenheit. –
READ THE MAXIMUM/MINIMUM TEMPERATURE RECORDS
1. Press MAX/MIN at the rear to display the indoor/outdoor maximum or minimum temperatures.
2. When maximum indoor/outdoor temperatures are displayed, press and hold MAX to clear the
maximum values; the unit will start recording and displaying updated data again.
3. When minimum indoor/outdoor temperature and humidity are displayed, press and hold MIN to
clear the minimum values; the unit will start recording and displaying updated data again.
ENG-3
USE INSTRUCTIONS FOR THE WEATHER STATION
There are four types of weather display on your weather station:
SUNNY / SUNNY AND CLOUDY / CLOUDY / RAINY.
SUNNY
SUNNY AND CLOUDY
CLOUDY
RAINY
Please note: For better use of your weather station, place it in a location with air circulation, e.g.
close to an open window. Placing it in an air-conditioned environment will affect its accuracy.
After your weather station is powered up, it will take around 24 hours to stabilize. The weather icons
on the display give reference to the next 6-12 hours weather conditions. It may not match with the
current weather condition outside.
SYNCHRONIZE CLOCK WITH MULTIPLE OUTDOOR SENSORS
Your indoor unit comes with one outdoor sensor. You can purchase a second or third outdoor sensor
to work with this unit simultaneously.
1. Press + / CHANNEL (ALM On-Off), the bottom line of the LCD shows “CH2” and “--“. Press and
hold + / CHANNEL / ALM On-Off for 2 seconds. Insert 2 x AAA batteries in the second outdoor
sensor Change the button setting from 1 to 2 for selecting channel 2. The temperature of the . “ ” “ ”
second outdoor sensor is displayed on the lower line on the LCD.
2. . Repeat this step to synchronize a third outdoor sensor on “CH3”
TROUBLESHOOTING
1. In case your indoor unit shows irrelevant information or digits, it may be affected by electrostatic
discharge or interferences from other devices. Press RESET on the rear of the unit. Your unit
will be reset to the factory settings (time and calendar) and you need to set time and calendar
again.
2. In case the outdoor temperature shows “--“:
2.1) Press + / CHANNEL (ALM On-Off) to display the correct channel, “CH1” is your default
channel;
2.2) -OFF) for If the outdoor temperature shows “CH1”, press and hold + / CHANNEL (ALM ON
2 seconds. The outdoor temperature will be displayed in approx 1 minute;
2.3) If above procedures do not work, repeat 2.2), bring in the outdoor sensor and press
RESET on the outdoor sensor.
Please note: If you observe a “Low Battery” icon on the lower left side of the LCD (which means your
outdoor sensor has a low battery level), replace the batteries of the sensor.

Especificaciones del producto

Marca: Denver
Categoría: Estación meteorológica
Modelo: TRC-1480 MK2

¿Necesitas ayuda?

Si necesitas ayuda con Denver TRC-1480 MK2 haz una pregunta a continuación y otros usuarios te responderán


Estación meteorológica Denver Manuales

Denver

Denver TRC-1480 MK2 Manual de Usario

20 Agosto 2024
Denver

Denver TRC-1490 Manual de Usario

2 Agosto 2024
Denver

Denver TRC-1480 Manual de Usario

19 Julio 2024

Estación meteorológica Manuales

Últimos Estación meteorológica Manuales

Ascot

Ascot GT-WS-07s Manual de Usario

20 Octubre 2024
Ventus

Ventus K0382 Manual de Usario

18 Octubre 2024
Hyundai

Hyundai WSP 3080 Manual de Usario

15 Octubre 2024
La Crosse Technology

La Crosse Technology V61 Manual de Usario

8 Octubre 2024
Cresta

Cresta WX580M Manual de Usario

6 Octubre 2024
Sencor

Sencor SWS 65 Manual de Usario

5 Octubre 2024
Irox

Irox JKR-1 Manual de Usario

5 Octubre 2024
TFA

TFA 30.5002 Manual de Usario

5 Octubre 2024
TFA

TFA WeatherHub 30.3306.02 Manual de Usario

4 Octubre 2024
Jung

Jung WS10R Manual de Usario

4 Octubre 2024