Dri Eaz Velo F518 Manual de Usario

Dri Eaz Calentador Velo F518

Lee a continuación 📖 el manual en español para Dri Eaz Velo F518 (1 páginas) en la categoría Calentador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Owner’s Manual
Velo & Velo Pro HEPA Kit
Model F518
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: 3030 7950+1 800 932- - Fax: +1 360 757- - www.dri-eaz.com
The HEPA Kit allows the Velo and Velo Pro to be used for general air scrubbing applications.
Patents: http://www.LBpatents.com
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
NOTICE: Always operate the unit on a stable,
level surface so it cannot fall and cause injury.
WARNING! Do not alter or modify this product
in any way. Use only replacement parts
authorized by Dri-Eaz Products, Inc. Modifications or use of
unapproved parts could create a hazard and will void your
warranty. Contact your authorized Dri Eaz distributor for -
assistance.
Warranty registration
Please visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using, maintaining
or servicing your equipment and to contact you in case we have
important safety information concerning your Dri Eaz product. -
TIP: Retain the product box for convenient storage and
transport.
INSTALLATION INSTRUCTIONS
Follow the steps indicated below to install the HEPA attachment to
your Velo unit.
MAINTENANCE
Change Prefilter Cover whenever dust accumulation is visible.
Part ( F520 20 pack).
Change HEPA lter when airflow is noticeably reduced. Part F519
(1 pack).
Wipe off top and filter frame as needed.
FOR QUESTIONS, CALL YOUR LOCAL DISTRIBUTOR or contact the
Dri- - -Eaz Service Department at 800 932 3030.
2. Slide HEPA filter element
down over filter frame. Ensure
filter is centered over the Velo
air intake.
4. Place top over HEPA filter
assembly and tighten with
wingnut. This will lock the filter
assembly snugly to the
airmover. Do not overtighten.
3. Pull prefilter cover down
over HEPA filter element.
Fig. A: Installing the HEPA Kit
1. Center the filter frame over the
top of the impeller assembly. With
frame hooks in place under intake
grill, Rotate the frame clockwise
until the hooks fit under the intake
grill crossbars.
07 01888 518 2014 0425- B F -05 Warranty 07-0 1 -Dri Eaz Products, Inc.

Especificaciones del producto

Marca: Dri Eaz
Categoría: Calentador
Modelo: Velo F518

¿Necesitas ayuda?

Si necesitas ayuda con Dri Eaz Velo F518 haz una pregunta a continuación y otros usuarios te responderán




Calentador Dri Eaz Manuales

Calentador Manuales

Últimos Calentador Manuales