Eikon EK100BM Manual de Usario

Eikon micrófono EK100BM

Lee a continuación 📖 el manual en español para Eikon EK100BM (4 páginas) en la categoría micrófono. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
EK100BM
LOW PROFILE CONDENSER
BOUNDARY MICROPHONE
USER’S MANUAL
ENGLISH
General
Low profile condenser phantom powered boundary microphone.
This elegantly shaped microphone has an extended and flat frequency
response.
It is available in black and can be used on a table or flat surfaces.
It features a mini -XLR output connector and it's supplied with an XLR
terminated cable.
Product complies with CE regulations
Precautions
Before installing this unit please read carefully these
instructions, and keep this manual for future owner’s
reference.
WARNING: improper installation could irreparably damage
the unit.
Be careful that unit operation may not cause damage to
people.
Place the unit a location protected from weather and far in
from water and moisture.
Don’t place this unit close heat sources (radiators, to
spotlights, amplifiers etc.).
Avoid any liquid entering inside the unit.
No user-serviceable parts inside.
Refer servicing to an authorized maintenance centre only.
Installation
1. Being careful about mounting direction, insert the mini XLR
connector the rear EK100BM microphone. on
2. Connect microphone base to an external unit (mixer,
amplifier, etc.) using supplied cable. If the external unit
microphone input can supply Phantom power, apply it to
this microphone switching Phantom power by on
Note: before connecting the microphone to the external unit, it must be
turned off and with its volume settings at minimum.
Operating Suggestions
If the microphone is placed too close to speaker, it could
generate feedback (Larsen effect). Avoid placing the
microphone too close to the speaker and avoid orienting its
capsule toward the speaker. If, despite these practices, you
hear feedback, please lower speaker volume.
Due the very high sensitivity, careful the to microphone’s be
microphone dropped and avoid shock, could isn’t as it be
damaged.
In order maintain sensitivity and performance, avoid to
exposing the microphone moisture high temperatures. to or
Specifications
Model
EK100BM
Element
Back Electred Condenser
Polar Pattern
Uni-directional
Frequency response
60Hz-16kHz
Sensibility
-48dB±3dB (0dB=1V/Pa @ 1kHz)
Output impedance
600 ohms
Max Imput SPL
105 dB (at 1KHz<1% T.H.D.)
S/N ratio
67 dB (1KHz@ 1Pa)
Operate Voltage
9V-48V DC
Cable length
10 m
Weight (Kg)
0,25 without cable
Dimension
75 x 100 x 20 mm
Color
Black

Especificaciones del producto

Marca: Eikon
Categoría: micrófono
Modelo: EK100BM

¿Necesitas ayuda?

Si necesitas ayuda con Eikon EK100BM haz una pregunta a continuación y otros usuarios te responderán




micrófono Eikon Manuales

micrófono Manuales

Últimos micrófono Manuales