Elba ETM-E3920 Manual de Usario
Lee a continuación 📖 el manual en español para Elba ETM-E3920 (1 páginas) en la categoría Kraan. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/1
A Tap Body
B Rubber O-ring
C Sink top or Work top
D Rubber O-washer
E Metal O-washer
F Threaded fixing bushing
G Flexi bose
H Rubber O-ring for flexi hose
1. An opening hole of 35mm diameter is required on sink top or work top for installation of tap.
2. Slide the rubber O-ring (B) over the threaded tube and up to the base of tap (A).
3. Insert the threaded tube through the hole of sink top or work top (C) and position the tap properly.
4. Slide the rubber O-washer (D) and metal O-washer (E) over the threaded tube and up to the underside of
sink top or work top (C).
5. Screw the fixing bushing (F) up to the metal O-washer (E).
6. Connect the flexi hoses (G) to the extension tube on one end and the hot or cold water supply on the other
end. Please ensure that the hot water supply goes through the hot flexi hose while the cold water supply goes
through the cold flexi hose.
(C)
ETM-E3820
●Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 C˚ ˚
-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure differences between hot and cold water
supply
●Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
●Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
●Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
ETM-E3320 ETM-E2920 ETM-E3920
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Mixer Tap
Especificaciones del producto
Marca: | Elba |
Categoría: | Kraan |
Modelo: | ETM-E3920 |
¿Necesitas ayuda?
Si necesitas ayuda con Elba ETM-E3920 haz una pregunta a continuación y otros usuarios te responderán
Kraan Elba Manuales
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
Kraan Manuales
- Kraan IKEA
- Kraan Etna
- Kraan Inventum
- Kraan Smeg
- Kraan KitchenAid
- Kraan Teka
- Kraan Miomare
- Kraan Ernesto
- Kraan CDA
- Kraan Stiebel Eltron
- Kraan Grohe
- Kraan Franke
- Kraan Nodor
- Kraan Delta
- Kraan Elkay
- Kraan Caple
- Kraan Quooker
- Kraan Brita
- Kraan ZLine
- Kraan Hansgrohe
- Kraan Empire
- Kraan Moen
- Kraan Aloni
- Kraan WillieJan
- Kraan Sani-Lav
- Kraan Mizzo
- Kraan Brauer
- Kraan Fala
- Kraan Lomazoo
- Kraan Deante
- Kraan Omnires
- Kraan Viidako
- Kraan Curaqua
- Kraan Waltec
- Kraan Sussex
- Kraan Oliveri
- Kraan Axor
- Kraan Graff
- Kraan Zurn
Últimos Kraan Manuales
27 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
22 Septiembre 2024
21 Septiembre 2024