Elco MHS - EURON 30 Manual de Usario

Elco Caldera MHS - EURON 30

Lee a continuación 📖 el manual en español para Elco MHS - EURON 30 (49 páginas) en la categoría Caldera. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/49

1 of 49

Installation and Operation

Guide

EURON 24/30HG

EURON 30 HSG

Manual Ref: L307

2 of 49

Contents ......................................................................... 2

General Information ......................................................................... 3

Regulations ......................................................................... 3

Conditions of warranty ......................................................................... 3

Quality of heating circuit water ......................................................................... 4

 5

Technical Data .................................................. 6 - 7

Dimensions ....................................................... 8

Minimum clearances ........................................ 9

Connection Kits ................................................ 10

Access to Boiler / Case removal ....................... 11

Connections ..................................................... 12

 13

Ciculation Pump ............................................... 14

Electrical Connections .................................... 15 - 16

Connection of air/flue gas pipes ....................... 17

Air/flue gas routing ........................................... 18

Flue variants and dimensioning ....................... 19

Commissioning Preparation for operation / Control Panel ......... 21 - 22

Parameter adjustment to control unit QAA73 . . 23

Flue gas Measurement and Adjustment ........... 24 - 27

Safety check of heating appliance .................... 28

Parameters ....................................................... 29

Gas Changeover ............................................... 30 - 32

Service and Maintenance Monitoring and checks ...................................... 33 - 34

Error Indication ................................................. 35 - 36

Service Access to Boiler / Cover Removal ....... 37

Dismantling burner and heat exchanger ........... 38

Service Requirments ........................................ 46

Appendix QAA 73  End User Parameters ...................... 40

QAA 73  Engineer Parameters ........................ 41

LMU 54  Engineer Parameters ........................ 42

LMU 54  Specialist Engineer Parameters ....... 43 - 44

Flue Termination Guidlines ............................... 45

Typical Hydraulic Schemes ............................... 46

Notes ......................................................................... 47

Contents

3 of 49

General Information, Regulations

Conditions of warranty

General Information

Installation, assembly, gas

connection, electrical connection and

first commissioning must be carried

out by, and is the responsibility of, a

competent specialist(s).

Operator/End user Information

To ensure the continuing safety,

reliability and efficient functioning of

the boiler, the equipment must be

regularly serviced by a competent

specialist.

To ensure regular and essential

Servicing and Maintenance we would

recommend entering into a Service

Contract (Please contact MHS Boilers

Service Department for more details)

Clarification of Warranty

conditions

Faults arising from the following are

excluded from our warranty:

- Inappropriate or incorrect use

- incorrect installation i.e. not as per

MHS installation requirements

- Commissioning not carried out by

MHS  Parts Only Warranty

- use of non-genuine spare parts

- Poor system water quality and

failure to maintain water treatment

- Use of inappropriate fuel

- Operation of boiler with excessive

or insufficient water pressure

- Operation of boiler using incorrect

power ratings

- Unauthorised modification or

alteration

- Failure to observe the information

in the manual and the instruction

plate on the burner equipment

Instructions, data badge and warning

labels on the boiler must never be

removed or altered. If damaged or

missing should be replaced as soon as

possible.

This appliance manual must be

handed to, and left with, the end

user following successful

completion of the installation.

This appliance should never be left

to operate with the outer casing

removed

Regulations and Standards

For safe, environmentally sustainable

and energy saving operation, observe

the following standards:

BS 5440-1:2008 Flueing and

ventilation for gas appliances of

rated input not exceeding 70 kW

net. Specification for installation of gas

appliances to chimneys and for

maintenance of chimneys

BS 5440-2:2000 Flueing and

ventilation for gas appliances of

rated input not exceeding 70 kW

net. Specification for installation and

maintenance of ventilation for gas

appliances.

BS 5449: Part 1 1977 Code of practice

for central heating for domestic

premises

BS 6798:2000 Specification for

installation of gas fired boilers of rated

input not exceeding 70 kW net.

BS 7671. Requirements for electrical

installations. IEE wiring regulations.

BS EN 12828: 2003 Heating systems

in buildings. Design for water-based

heating systems

Water Regulations (Water Fittings)

Regulations 1999.

Gas Safety (Installation & Use)

Regulations 1998.

Especificaciones del producto

Marca:	Elco
Categoría:	Caldera
Modelo:	MHS - EURON 30
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Draaiknop
Color del producto:	Zwart
Peso.:	39000 g
Ancho:	1346 mm
Profundidad:	643 mm
Altura:	940 mm
Número de quemadores/zonas de cocción:	2 zone(s)
Fácil de limpiar:	Ja
Soporte de colocación:	Buiten
Termostato ajustable:	Ja
El número de ruedas:	2 wiel(en)
Tipo gas:	Butaan/propaan
Número:	1
Tapa:	Ja
Superficie para hornear (BXD):	- mm
Capacidad de calentamiento:	- W
Piernas:	Ja
Elegir:	Ja
Período de garantía:	2 jaar
Material del quemador:	Roestvrijstaal