EluneVision Titan Manual de Usario

EluneVision pantalla de proyección Titan

Lee a continuación 📖 el manual en español para EluneVision Titan (6 páginas) en la categoría pantalla de proyección. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

To the Owner

Thank you for purchasing our Titan Tab Tension screens, using our excellent screen

materials and design, to give you years of trouble free enjoyment. Please take a

moment to read the user manual before installation to avoid any potential issues.

1. When assembling, do not stand right under the screen. Expansive bolts should

be rmly punched and xed into the wall or ceiling.

2. Have two people present when installing the screen

3. Be sure the ground wire is connected with power cable to avoid electric shock

4. Keep screen fabric away from the high temperatures to avoid permanent mate-

rial deformation.

Safety Guide

Titan Tab Tension Schematic

Exploded View

6 3

1. Unpack the screen carefully, check if the screen is in good condition

2. Be sure the ground wire is connected with power cable to avoid electric shock

3. Find the wall or ceiling placement for the screen mounts, make sure everything is

level

4. Attach the screen mounts to the wall or ceiling, then mate the mount into the

screen railing to lock the screen into place

5. Refer to the diagrams below for more details

Installation

Installation Notes

1. Install the screen away from direct sunlight, keep screen material exposure to

UV to a minimum

2. Install in a room without excess humidity

3. Keep screen away from devices (heaters, etc.) that cause large changes in tem-

perature and humidity

4. Handle screen with care, avoid vibrations and drops

Screen mount Screen mount mated to screen rail

Operating Notes

1. Do not run the screen continuously for more than 5 minutes, the motor will

shut down after more than ve minutes of continous use to prevent overheat-

ing

2. Unplug the screen when screen is not to be used for an extended period

3. Check and replace battery if remote stop working

4. -Do not pull on control wire to support to prevent screen malfunction and elec

tric shock

5. Never disassemble the limit switch

Control Panel

1. The upright position for the control wall panel is shown in the picture. The cable

should come out from the bottom of the control wall panel.

2. The button closest to the IR sensor is the up button.

3. The second button from the top is the stop button.

4. The last button from the top is the down button

IR Sensor

Especificaciones del producto

Marca:	EluneVision
Categoría:	pantalla de proyección
Modelo:	Titan
Peso.:	220 g
Ancho:	77 mm
Profundidad:	82 mm
Altura:	25 mm
Indicadores LED:	Ja
Número de puertos USB 2.0:	8