EMOS P56501 Manual de Usario

EMOS Detector de humo P56501

Lee a continuación 📖 el manual en español para EMOS P56501 (70 páginas) en la categoría Detector de humo. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/70

2104101000_31-P56501_00_01_WEB 105 × 148 mm

www.emos.eu

P56501 | GS536-H01, GS536G

GB Smoke Detector

CZ Detektor kouře

SK Detektor dymu

PL Detektor dymu

HU Füstérzékelő

SI Detektor dima

RS|HR|BA|ME Detektor dima

DE Rauchmelder

UA Детектор диму

RO|MD Detector de fum

LT Dūmų detektorius

Dūmu detektors

EE Suitsuandur

BG Датчик за дим

FR Détecteur de fumée

IT Rivelatore di fumo

ES Detector de humo

NL Rookmelder

GB | Smoke Detector

This manual contains important safety information regarding the installation and operation of the

detector. Carefully read this manual and store it safely for future use. Familiarise other residents of

the building with the operation of the detector.

Create an evacuation plan in case of re and perform a drill every month. All residents of the building

should be familiar with the detector signals in order to be able to immediately react to them. The

detector allows the detection of slow burning ames accompanied by thick black smoke. These

ames can take hours before they turn into a large re.

Warning:

If construction work causing a large amount of dust is taking place on your premises, you should

dismount the detector from the mounting plate to protect it from dirt. If you cannot do so for any

reason, cover the openings of the detector for the duration of work, by e.g. a plastic bag. A covered

detector will not detect smoke. Uncover it every day after work is nished.

Technical Information:

Sensor type: photoelectric cell

Service life: 10 years

Operating temperature and humidity: 0 °C to +40 °C, 5 to 95% (without condensation)

Enclosure: IP20

D E

Acoustic signalisation: >85 dB at a distance of 3 m

Power supply: 1× 9 V (battery life 1 year)

Power consumption: <10 μA standby mode, <30 mA alarm mode

Smoke detection sensitivity: 0.109 to 0.160 dB/m

Dimensions: 90 × 35 mm

Weight: 65 g

Detector Description

A – LED

B – Main button

C – Loud siren

Installation

The installation must be performed by a qualied person.

The person performing the installation is responsible for installing the product in accordance with

valid regulations.

When in doubt, leave the installation to a qualied professional.

The detector is not designed for use in camper vans.

Ideally, a smoke detector should be installed in every room of the house with the exception of kitchens,

bathrooms and garages.

Each oor of the house, including the stairs, should have at least one smoke detector installed.

The smoke detector should be located in a place where you can hear it even when you are sleeping,

e.g. in the hall in front of the bedroom.

Install the detector on the ceiling of each bedroom and the hall in front of the bedroom.

If the hall is longer than 9 m, install a detector on both ends.

If you have a multi-storey house, install the detector in the same manner on each oor.

You will be protected even against smoke rising up the stairs from the bottom oor.

In the cellar, install the detector on the ceiling at the bottom of the stairs.

Do not install the detector in bathrooms or kitchens; the steam from water or food could cause

false alarms.

In the garage, the alarm could be triggered by the exhaust from your car.

The ventilation openings of the warning device must not be covered up.

Do not spray aerosol agents in the vicinity or onto the warning device.

Do not paint the warning device.

Pictures for Installation of the Detector:

1. Holes in the ceiling (wall); 2. Wall plugs; 3. Mounting plate; 4. Screws; 5. Detector

Installing the Device onto a Wall – Description

Drill two holes (ø 5 mm) into the wall (1.); the distance between the holes should be 60 mm.

Insert the attached wall plugs (2.) into the holes, place the mounting plate (3.) and attach it to the

wall using screws (4.). Insert and connect the battery to the detector (pictures D and E) and test its

functionality; see Test Mode.

If the detector is operational, place the rear side of the detector onto the mounting plate into the

two mounting pegs and turn it.

Note:

National regulations vary in terms of the number and location of smoke detectors.

When in doubt, contact for example the re brigade in your country.

Especificaciones del producto

Marca:	EMOS
Categoría:	Detector de humo
Modelo:	P56501
Color del producto:	Zwart
subwoofer de potencia media:	200 W
Altavoz de graves con controlador de diámetro (imperial):	10 "
reflejo de graves:	Ja
Tipo de subwoofer:	Actieve subwoofer
Rango de frecuencia del subwoofer:	20 - 20000 Hz
Ancho del subwoofer:	380 mm
Altura del subwoofer:	330 mm
Profundidad del subwoofer:	330 mm
Peso del subwoofer:	10000 g
Sensibilidad del subwoofer:	88 dB
Altavoz de graves con controlador de diámetro:	250 mm
Fase de control:	Ja