Empisal 760C Manual de Usario
Empisal
máquina de coser
760C
Lee a continuación 📖 el manual en español para Empisal 760C (36 páginas) en la categoría máquina de coser. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/36
EMPISAL COMPLETE FREE ARM OVER LOCKE
INSTRUCTION MANUAL
1
Safety instructions
Like any other electrical device, a overlock machine can cause serious, even
life-threatening injuries.To avoid this, and in order to work safely:
• Before initial use of your overlock machine, read these operating instructions
thoroughly.
• Keep the operating instructions in a suitable place near the machine. When
passing the appliance on to others, always enclose the operating instructions.
• Always disconnect the power supply when leaving the machine unattended.
This will prevent the risk of accidents if the machine is switched on
accidentally.
• First pull the power plug before changing the bulb or performing maintenance
work on the machine. This will prevent possibly life-threatening electric
shocks.
• Do not remove the plug from the socket by pulling on the cable. Always grip
the plug and not the cable when pulling out the power plug.
• Only use the Don’t use the machine in wet overlock machine in dry rooms.
condition and location.
• In case of any visible damage on the machine, the foot switch or the power
cable: Have the damage repaired by Customer Service before using the
overlock machine again.
• The supply cord cannot be replaced. If the supply cord connected with foot
controller is damaged the foot controller shall be scrapped.
• Never let children or elderly persons handle the machine unsupervised
because they may not properly appreciate the possible dangers. Keep
electrical appliances outside the reach of children.
• Never use the machine if the air vents are blocked keep the air vents of the
machine and the foot controller free form dust, fusel and leftovers
• Change the light bulb only with the same type of bulb 15W.
• Never place anything on the foot controller.
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without
supervision.
Especificaciones del producto
Marca: | Empisal |
Categoría: | máquina de coser |
Modelo: | 760C |
¿Necesitas ayuda?
Si necesitas ayuda con Empisal 760C haz una pregunta a continuación y otros usuarios te responderán
máquina de coser Empisal Manuales
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
máquina de coser Manuales
- máquina de coser AEG
- máquina de coser Alfa
- máquina de coser Brother
- máquina de coser Sinbo
- máquina de coser Jata
- máquina de coser Emerio
- máquina de coser Singer
- máquina de coser Bernina
- máquina de coser Pfaff
- máquina de coser Juki
- máquina de coser Elna
- máquina de coser Mellerware
- máquina de coser Termozeta
- máquina de coser Jocca
- máquina de coser Toyota
- máquina de coser Husqvarna
- máquina de coser Bernette
- máquina de coser Janome
- máquina de coser Necchi
- máquina de coser Yamato
- máquina de coser Durkopp Adler
- máquina de coser Kayser
- máquina de coser RCE
- máquina de coser Veritas
- máquina de coser Union Special
- máquina de coser Easy Home
- máquina de coser Vendomatic
- máquina de coser Baby Lock
- máquina de coser Lewenstein
- máquina de coser Meister Craft
- máquina de coser Yamata
- máquina de coser Weasy
- máquina de coser Victoria
- máquina de coser Muller
- máquina de coser Sinojo
- máquina de coser Huskystar
- máquina de coser Gritzner
- máquina de coser W6
- máquina de coser Feiyue
- máquina de coser Husqvarna-Viking
- máquina de coser SteamMax
Últimos máquina de coser Manuales
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
20 Octubre 2024