Ernitec NVR 32 Manual de Usario
Ernitec
Videograbadora
NVR 32
Lee a continuación 📖 el manual en español para Ernitec NVR 32 (4 páginas) en la categoría Videograbadora. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
Fully understand this document before using this device, and
strictly observe rules in this document when using this device. If
you install this device in public places, provide the tip "You have
entered the area of electronic surveillance" in an eye-catching
place. Failure to correctly use electrical products may cause fire
and severe injuries.
It alerts you to moderate dangers which, if not
avoided, may cause minor or moderate injuries.
It alerts you about risks. Neglect of these risks may
cause device damage, data loss, device
performance deterioration, or unpredictable results.
It provides additional information.
ŸStrictly observe installation requirements when installing the
device. The manufacturer shall not be liable for device damage
caused by users' non-conformance to these requirements.
ŸStrictly conform to local electrical safety standards and use
power adapters that are marked with the LPS standard when
installing and using this device. Otherwise, this device may be
damaged.
ŸUse accessories delivered with this device. The voltage must
meet input voltage requirements for this device.
ŸIf this device is installed in places with unsteady voltage, ground
this device to discharge high energy such as electrical surges in
order to prevent the power supply from burning out.
ŸWhen this device is in use, ensure that no water or any liquid
flows into the device. If water or liquid unexpectedly flows into
the device, immediately power off the device and disconnect all
cables (such as power cables and network cables) from this
Precautions Special Announcement
For more information please refer to our website.,
ŸAvoid heavy loads, intensive shakes, and soaking to prevent
damages during transportation and storage. The warranty does
not cover any device damage that is caused during secondary
packaging and transportation after the original packaging is
taken apart.
ŸProtect this device from fall-down and intensive strikes, keep the
device away from magnetic field interference, and do not install
the device in places with shaking surfaces or under shocks.
ŸClean the device with a soft dry cloth. For stubborn dirt, dip the
cloth into slight neutral cleanser, gently wipe the dirt with the
cloth, and then dry the device.
ŸDo not jam the ventilation opening. Follow the installation
instructions provided in this document when installing the device.
ŸKeep the device away from heat sources such as radiators,
electric heaters, or other heat equipment.
ŸKeep the device away from moist, dusty, extremely hot or cold
places.
ŸIf the device is installed outdoors, take insect- and moisture-
proof measures to avoid circuit board corrosion that can affect
monitoring.
ŸRemove the power plug if the device is idle for a long time.
ŸWhen unpacking, please first confirm whether fragile label is
damaged, if damaged, please contact customer service or sales
personnel in time. The company will not be liable for any human-
made damage to fragile labels.
ŸAll complete products sold by the manufacturer are delivered
along with nameplates, quick setup guide and accessories after
strict inspection. The manufacturer shall not be liable for
counterfeit products.
ŸThe manufacturer will update this manual according to product
function enhancement or changes and regularly update the
software and hardware described in this manual. The updated
content will be added to new versions of this manual without prior
notice.
ŸThis manual may contain misprints, technology information that
is not accurate enough, or product function and operation
description that is slightly inconsistent with the actual product,
the final interpretation of company is as a standard.
ŸThis manual is only for reference and does not ensure that the
information is totally consistent with the actual product. For
consistency, see the actual product.
NOTE
device.
ŸIf this device is installed in places where thunder and lightning
frequently occur, ground the device nearby to discharge high
energy such as thunder strikes in order to prevent device
damage.
CAUTION
Open the package, check the appearance of product for no
obvious damage, and confirm the item list for table 1-1 is
consistent.
Table 1-1 Packing list
Open Package Examination
1
NOTE
CAUTION
WARNING
WARNING
Component
Network video recording
Countersunk head black screws
Power Cord
Green female wiring terminal
Mouse
Quick Setup Guide
1
6
1
1
1
Countersunk head imperial white
screws
24
Quantity
2(8)
Remark
Table -2 1 Front panel description
2.1 Device Ports
Different devices may have different ports and multi-head
cables; Please refer to the actual product.
NOTE
D evice Structure2
Table -2 2 Rear panel description
For front panel description of device refer to table 2-1.
Port Name Description
HDD
Indicator
Hard disk status indicator.
This indicator flashes when data is transmitted.
USB 2.0 Support connected to an USB mouse or USB disk.
PWR
Indicator
When the NVR is operating, the PWR indicator
is steady on. When the NVR is shut down, the
PWR indicator is off.
PoE
Indicator
PoE network status indicator.
This indicator flashes when data is transmitted.
For rear panel description of device, please refer to table 2-2.
Port Name Description
HDMI1/2
Support connected to 3.0 U disk.
VGA
USB .3 0
Alarm input and alarm output, 1A&1B~4A/4B are
alarm out. A is RS 485+, B isRS485-.
Audio out/
Audio in
Audio output and audio input.
LAN
RJ 1000 Mbps adaptive Ethernet interface, connect
to intranet to add cameras.
The hard disk of the NVR must be provided by the user. Take the
following steps to install the hard disks：
Step 1 Remove the screws for fixing the cover and take down the
cover.
Step 2 Put the hard disk under the hard disk bracket, hold the hard
disk with one hand and aim the hard disk hole at the
bracket hole, then fix the screws for hard disk(Install the
hard disk near the fan first).
Figure -3 1 Installing the hard disk
2 2. Device Dimensions
Different devices may have different dimensions; Please
refer to the actual product.
NOTE
3Device Installation
Figure 2-1 Dimensions (Unit:mm)
Step 3 Repeat step 2 to install other hard disks, and insert the hard
disk data cables and power cables, then replace the upper
cover and fasten the fixing screws.
Hard disk
Hard disk bracket
AC 110V/220V power input interface.
RS232
Standard Rs232 serial communication interface
of the device.
Power switch.
Safe ground screw of the device.
376
440
376
369
70
67
ALARM I/O
RS 485
WAN
RJ 1000 Mbps adaptive Ethernet interface, connect
to Internet .
e SATA External hard disk interface.
Video output interface. If the Auxiliary Screen is
enable, HDMI1’s output is main screen, VGA’s
output is auxiliary screen.
Hanger 2
NVR 32
channel
Quick Setup Guide
Item no.: 0070-10404
Re cord
Al ar m
Network System
Sy ste m
Channel
802.1X
DDNS
Emai l
Port Mappi ng
P2P
IP Fi lter
SNMP
PPPOE
3G/ 4G
Net work Traff ic
Platform Ac ce ss
DHCP
IP
Port IPv4CCT V
IP Ad dress
Subnet Mas k
Defa ul t Gatew ay
Obtai n DNS Automati ca ll y
Preferred DNS S erver
Alte rnate DN S Serv er
192 . 1 68 . 0 . 12 1
255 . 2 55 . 25 5 . 0
192 . 1 68 . 0 . 1
192 . 1 68 . 0 . 1
8 . 8 . 8 . 8
Apply
Re co rd
Al ar m
Network Syst em
Ge ne ral
Mo ti on De tection
Video Los s
Intelligent Analys is
Alarm In
General
Ena ble Alar m
Apply
Ab no rm al Ala rm
Sy ste m
Channel
Advac ned Intel li gent Analy.
Al arm O ut
Loc al Intel li gent Analy s is
Ala rm Duration Time (s ec)
Buz zer Dur ation Tim e (sec)
10
30
Channel
Record Network
Alarm
System
Camera
Encode
OSD
Priv acy Zone
Record Schedule
Disk
Storage Mode
S.M.A.R.T
Disk Detec tion
RA ID
Network
DDNS
IP Filter
3G/4G
802.1X
Port Mapping
P2 P
SNMP
Email
. . .
General
Video L oss
In te lligen t Analysis
Alarm In
Information
General
User Acc ount
Sec urity C enter
Auxiliary Screen
Ma in te na nc e
Au to Re boot
Logs
Abnormal Alarm
Motion D etection
Layout
Sensor Settin g
Mic rophone
Smart
ROI
Human Thermome t
In telligent Track ing
Disk Calculation
FTP
Advanced Inte llige nt Analysis
. . .
In some environments, if the power supply is abnormal,
the NVR may not work properly. In severe cases, the NVR
may be damaged. In these environments, it is
recommended to use regulated power supply.
Device Operation
4
4.1 Startup
Before starting NVR, ensure that the NVR is connected to a
power supply properly and a monitor is connected to the HDMI or
VGA interface of the NVR correctly. After starting the NVR, there
is a login window located in the center, as shown in figure 4-1.
CAUTION
Figure 4-3 Topology of the NVR
Plug in power to access the NVR user page. The wizard
window would show at first time, users can configure quickly or
close immediately. For configuration details please refer to main
menu.
Right-click on the main interface at any where to access the
main menu. Main menu comprises Channel, Record, Alarm,
Network and System settings, as shown in figure 5 1.-
Quick Configuration5
.4 2 Topology of the NVR
cameras an For the NVR evice are on I ternet, or at same d d n
network, NVR and IP cameras can comm uni cate with each other
smoothly with WAN port. Figure 4-3 shows the network topology
of the NVR.
4.3 Special Function
Some functions are applicable for some special cameras,
such as Microphone, Human thermometer, Smart, Intelligent
Analysis, Advanced Intelligent Analysis, please refer to actual
camera channels.
4.4 Power off
Enter the Main Menu System Maintenance Shutdown > > > to
power off the NVR. Or turn off the power switch.
4.4 Quick menu
Put the mouse arrow on bottom of live video interface, the quick
menu will be showing. You can set layout to view live video, switch the
split screen, auto sequence, playback and so on.
NOTE
Ÿ The default name is admin, and NVR needs to activate, please create
new password of device and channels to activate.
Ÿ Users can set pattern to unlock quickly.
Ÿ .
Figure 4-2 Login interface
Pas
Figure 4-1 Activation interface
Figure 5-1 Main menu
Figure 7-1 Login
Mobile Client 6
ŸNetwork, 802.1X DDNS SNMP, , and interface to set network
parameters.
ŸEmail: Set E-mails for sending and receiving alarm messages
and password retrieval message.
ŸPort Mapping: Set the ports for remote scanning.
ŸP2P: Add NVR into device list of App by accessing the QR code.
ŸIP Filter: Settings for creating black list or white list.
Ÿ3G/4G: Use 3G/4G modem plug to NVR provide the network.
ŸPPPoE: Point to point network to access NVR directly.
ŸNetwork Traffic : View the send and receive rate of network.
ŸPlatform Access: Set URL parameters for accessing to
CMS(Center Management System).
5.6 Live Video
nter the user name and password in the login interface, and
click Login to enter the real-time video interface. As shown in
Figures 5-5.
Figure 5-5 Live video
The NVR also can be accessed in a Web browser. Open a web
browser like Chrome 45 and enter the IP address of device (The
default IP address is 192.168.0.121) in the address box, and
press . The login page is displayed as shown in figure 7-1.Enter
Web ccessing A
7
Search for “InView Pro4” in App Store or Google Play to
download and install the App. Use the App to scan the QR code,
which you can find it on the backboard of the NVR and on P2P
settings page (Main menu>Network>P2P) in user interface. Then
input the NVR's user name and password to add the NVR to the
device list. Users can manage the device on the APP.
5.5 System
System settings contain Information, General, User Account,
Security Center , Layout, Auxiliary Screen, Logs, Maintenance
and Auto Reboot, as shown in figure 5-4.
5.4 Network
Network settings contain Network, 802.1X, DDNS, E-mail,
Port Mapping, P2P, IP Filter, SNMP, 3G/4G, PPPoE, Network
Traffic and Platform Access, as shown in figure 5-3.
Figure 5-3 Network
5.2 Record
Record settings contain Record Schedule, Disk, Storage, RAID,
S.M.A.R.T, Disk Detection, Disk Calculation and FTP.
ŸRecord Schedule: Set record schedule and storage strategic.
ANR is auto network recording, if the camera is plugged SD card
and enabled record, if camera is disconnected, when the
connection is recovered, NVR will copy the recording of the lost
videos.
ŸEnter S.M.A.R.T interface to view the state of disks. Disk
detection can detect the disks.
ŸRAID: If users install more than four disks and want to keep the
data safety, it is recommended to build RAID.
ŸDisk Detection: Check the disk health status.
ŸDisk Calculation: Two methods to calculate.
ŸFTP: File Transfer Protocol, set the FTP path to save the alarm
information if linkage to FTP.
5.1 Channel
Channel settings contain Camera, Encode, Image, OSD,
Privacy Zone, ROI (region of interest), Microphone, Human
thermometer, Smart, and Intelligent tracking.
ŸCamera: Users can add cameras automatically by clicking Click
to Add, and add manually by clicking Add. Tick cameras then
click Delete to delete cameras. Users can batch update software.
ŸEncode: Users can set stream, encode type, resolution, frame
rate, bit rate type, bit rate and so on.
ŸSensor setting: Adjust image parameters and users can set
senor parameter.
ŸOSD: Customize time and channel name displaying in the live
video page.
ŸPrivacy Zone: Set a privacy zone by clicking ana dragging
cursor and double-click an exist private area to delete it. Support
up to 4 zones.
ŸSome of these sett
ings can be copied to other channels by
clicking button.Copy
ŸMicrophone, Human Thermometer Smart Intelligent , , and
Tracking are the special functions for some models, not
applicable for all cameras.
5.3 Alarm
Alarm settings contain General, Motion Detection, Video Loss,
Advanced Intelligent Analysis, Intelligent Analysis, Alarm in,
Abnormal Alarm, Alarm out and Local intelligent analysis, as
shown in figure 5-2. Figure 5-2 Alarm Figure 5-4 System
ŸInformation: View the basic information, such as System,
Network, Channels, Disk, Alarm.
ŸGeneral: Include system, date and time, time zone, DST.
ŸUser Account: Add users and set advance setting (auto login,
password double authentication, boot wizard).
ŸSecurity Center : Modify the password, pattern unlock, secure
Email, Secure question.
ŸLayout: Add layouts to preview live video of the channels.
ŸAuxiliary Screen: Use HDMI and VGA to view live video at the
same time. HDMI port output acts as main screen.
ŸLogs: Users can export logs ( operating and alarm logs) if plug
in a USB disk.
ŸMaintenance: Include shutdown, reboot, exit system, reset,
import configuration, export configuration and update.
ŸAuto Reboot: Enable this function and the device will restart
periodically.
ŸGeneral: Enable or disable alarm and set duration time of
alarm and buzzer.
ŸMotion Detection: Enable this function, if detects any
movement, it will alarm.
1. Event actions: Contain buzzer, alarm out, push message to
App, pop-up message to monitor, send E-mail and post
recording (after enabling, choose the recording time from drop
list.)
2. Area: Set motion detection area. Press left button and drag the
cursor to add a detection area, and double-click an area to
delete it.
3. Schedule: Set schedule to enable or disable motion detection
alarm. There are three methods to set: the first is clicking the
double arrows button to choose all day. The second, click and drag
the cursor to select periods. The third, click one by one.
ŸVideo Loss, Intelligent Analysis are same settings as motion
detection. Advanced Intelligent Analysis is used for thermal
cameras, alarms for smoker detection, smoke and flame
detection and fire spot detection.
ŸAlarm In / Alarm out: Settings for I/O alarming. Abnormal
Alarm can tick disk error, IP conflict, network disconnected.
ŸLocal Intelligent Analysis: It is up to be set for 4 channels, set
local intrusion parameter on NVR.
NOTE
Add IP cameras
WAN
Forgot pas s word
Login
Login
admin
English
Pa ttern Unlo ck
Activ ation
OK
--Valid password range [6-32] characters.
--At least 2 kinds of numbers, lowercase, uppercase or specia l.
-- Only these special characters ar e suppor ted !@#$*+-=_%&”’.
Language
Username
Enter a new password
Confirm the new password
Enter channel default password
English
admin
Pas sword
Pas sword
Pas sword
Re cord
Al ar m
Network System
Sy ste m
Channel
General
Informati on
Us er Account
Secur ity Center
Auxili ary S creen
Layout
Logs
Auto Reboot
Maint enance
De vice ID
Dev ice Name
Dev ice Type
Model
Fir mw are Vers ion
HDD Nu mber
Channels Supported
Alarm In
Alarm Ou t
Audio In
Audio Out
U- boot Vers ion
Ker nel V ers ion
4
32
16
4
1
1
16081 20B122F
16081 20E3619
v4.6.1610.0000.00 03.0.x.x
NV R3932E4
NV R
D
evice
Network
Channel
Di sk
Al ar m
B011003AGHGQT 64X XXX
Sy stem
ŸFormat the disk and all data on disk will be lost, please be
careful to do this.
ŸBefore replacing the hard disk, the power must be turned off.
ŸThe disks of building RAID should be enterprise level, and the
capacities are better at the same.
ŸFor the safety of disks, please make sure the stabilization of
power on.
NOTE
The user name and password are same as in the UI interface.
Especificaciones del producto
| Marca: | Ernitec |
| Categoría: | Videograbadora |
| Modelo: | NVR 32 |
¿Necesitas ayuda?
Si necesitas ayuda con Ernitec NVR 32 haz una pregunta a continuación y otros usuarios te responderán
Videograbadora Ernitec Manuales
13 Septiembre 2024
13 Septiembre 2024
Videograbadora Manuales
- Videograbadora Sony
- Videograbadora Philips
- Videograbadora Daewoo
- Videograbadora Grundig
- Videograbadora JVC
- Videograbadora Motorola
- Videograbadora Medion
- Videograbadora Toshiba
- Videograbadora Canon
- Videograbadora Aiwa
- Videograbadora Acti
- Videograbadora Hikvision
- Videograbadora Hitachi
- Videograbadora TP Link
- Videograbadora DataVideo
- Videograbadora Axis
- Videograbadora Sylvania
- Videograbadora Digitus
- Videograbadora Dahua Technology
- Videograbadora GeoVision
- Videograbadora QNAP
- Videograbadora Reolink
- Videograbadora UniView
- Videograbadora Planet
- Videograbadora Navitel
- Videograbadora Foscam
- Videograbadora Tenda
- Videograbadora Ubiquiti Networks
- Videograbadora Seagate
- Videograbadora Synology
- Videograbadora Trendnet
- Videograbadora Vivotek
- Videograbadora Provision ISR
- Videograbadora AVer
- Videograbadora Speco Technologies
- Videograbadora Hanwha
- Videograbadora Inkovideo
- Videograbadora Avigilon
- Videograbadora Milesight
Últimos Videograbadora Manuales
26 Octubre 2024
22 Octubre 2024
20 Octubre 2024
15 Octubre 2024
10 Octubre 2024
9 Octubre 2024
8 Octubre 2024
7 Octubre 2024
2 Octubre 2024
24 Septiembre 2024