Eurolite LVH-6 Manual de Usario

Eurolite controlador LVH-6

Lee a continuación 📖 el manual en español para Eurolite LVH-6 (4 páginas) en la categoría controlador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

www.eurolite.de

USER MANUAL

BEDIENUNGSANLEITUNG

LVH-6

VIDEO SWITCH

Nachdruck verboten!

Reproduction prohibited!

LVH-6

A UT OM AT I C VI D E O S W I T CH

LVH-6 VIDEO SWITCH

LVH-6

AU T O M AT I C VI D E O S WI T C H

Video signal from equipment [NTSC/PAL]

Videosignal von Videogerät [NTSC/PAL]

12-24 V DC

Slave output to control other units

Slave-Ausgang zur Steuerung anderer Geräte

Alternate video source

Alternative Videoquelle

Acceptor or 75 terminator plugW

Endgerät oder 75 AbschlussW

POWER

LVH-6 VIDEO SWITCH

AUTOMATIC VIDEO SWITCH 2:1

The LVH-6 was designed to switch video signals from two sources to one output. The unit

utilizes a high quality RF relay to automatically switch to an alternate source when the

primary signal is lost. The slave output allows for controlling other units. Power connections

are made using block terminals. The unit responds to NTSC and PAL signals.

SAFETY INSTRUCTIONS

• Before your initial start-up, please make sure that there are no transport damages. Should

there be any, do not take the device into operation and immediately consult your dealer.

• Operate the device only after having familiarized with its functions. Do not permit operation

by persons not qualified for operating the device.

• Protect the device against humidity and heat. Keep away from heaters and other

heating sources!

• We recommend a frequent cleaning of the device. Disconnect from mains first. Use

a soft lint-free and moistened cloth. Never use alcohol or solvents!

• There are no serviceable parts inside the device. Maintenance and service operations are

only to be carried out by authorized dealers.

• Damage, caused by manual modifications on the device are not subject to warranty. If the

device is used for other purposes than originally intended or if it is not correctly connected,

the product may suffer damages and the guarantee becomes void.

• This product is allowed to be operated with 12-24 V DC. This device falls under protection

class 3 and was designed for indoor use only.

OPERATION

Prior to connecting switch off all units and do not turn them on again until you have made all

necessary connections.

1 Connect your signal source via a 75 coaxial cable with BNC plugs to the jack INPUT.This

input is 75 terminated.

2 Connect an alternative signal source via a 75 coaxial cable with BNC plugs to the jack

AUX INPUT.This input is terminated when it is connected to the output and is unterminated

when it is not in use.

3 Connect the unit to which the video signal is to be switched via a 75 coaxial cable with

BNC plugs to the jack OUTPUT. The output is designed to connect to a 75 load.

4 To power the unit 12-24 V DC are required. For this purpose, connect a power source (e.g.

power supply unit, battery) to the terminals DC 12-24. Always observe the correct

polarity.Connect the marked core to the left contact "+".

5 To control another unit with the LVH-6 connect it to the terminal SLAVE.

6 When the LVH-6 detects a video signal the jack INPUT is connected to the jack OUTPUT.

The unit responds to valid NTSC or PAL sync while ignoring 50 Hz and 60 Hz hum related

to induction artifacts. Weak signals as low as 0.5 V can be detected. When a valid signal is

detected, the relay also provides a ground connection to the SLAVE terminal, permitting

the unit to be connected as a video presence detector.

7 In the absence of video input at the jack INPUT or if power to the unit is interrupted, the jack

AUX INPUTis connected to the jack OUTPUT.

TECHNICAL SPECIFICATIONS

Power supply: ..................12-24 V DC, 30 mA

2x video inputs: ................0.5-1 Vpp/75 BNC, ground referenced

1x video output:................BNC, ground referenced

Slave output:....................100 mA, block terminal

Dimensions (LxWxH): ......76 x 41 x 31 mm

Weight: ............................7 g

Please note: Every information is subject to change without prior notice. 20.01.2009 ©

Especificaciones del producto

Marca:	Eurolite
Categoría:	controlador
Modelo:	LVH-6
Ancho:	225 mm
Profundidad:	244 mm
red LAN:	Ja
Tipo de fuente de energía:	ATX
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	1
Puertos DVI-D:	1
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Zócalo del procesador:	LGA 1151 (Socket H4)
Fabricante del procesador:	Intel
Memoria interna máxima:	64 GB
Canales de salida de audio:	7.1 kanalen
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo C:	1
Compatible con Linux:	Ja
Tipo de interfaz Ethernet:	Fast Ethernet, Gigabit Ethernet
placa base con chipset:	Intel® H270
Tipo de ranura de memoria:	DIMM
Ranuras PCI Express x16:	2
Preparada para la memoria Intel® Optane™:	Ja
Puerto(s) PS/2:	1
Componente para:	PC
Tipos de incursión:	0, 1,5, 10
Número de conectores SATA III:	6
No ECC:	Ja
Ranuras PCI:	2
Procesadores compatibles:	Intel Core i3, Intel Core i5, Intel Core i7
Tipos de memoria soportados:	DDR4-SDRAM
Tipos de unidades de almacenamiento compatibles:	HDD & SSD
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	micro ATX
Número de ranuras de memoria:	4
Velocidades de reloj de memoria admitidas:	2400,2133 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	64 Mbit
Versión ACPI:	5.0
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	3
Conector de alimentación ATX (24 pines):	Ja
Conector del panel frontal:	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Memoria sin búfer:	Ja
Puerto paralelo a través de encabezado interno:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Conector TPM:	Ja
Salida-S/PDIF:	Ja
Conector de alimentación EPS (8 pines):	Ja
Capacidades de módulos de memoria admitidas:	16GB
Borrar puente CMOS:	Ja
Número de ranuras M.2 (M):	1
Encabezados de puerto serie:	1
Puerto serie a través de encabezado interno:	Ja
Número de puertos SATA Express:	2