Ferm FKS-180 Manual de Usario

Ferm máquina de aserrar FKS-180

Lee a continuación 📖 el manual en español para Ferm FKS-180 (6 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0303-18

Ferm Circular Saw

FKS-180

USER’S MANUAL

Art.nr. 726800

Screwfix art.nr 15770

UK Subject to change

Document Ref:

FKS-180/15770/PMR9/Issue 1/Mar 02

These instructions are the sole property of Ferm-Omega Tools and may not be reproduced

Ferm 11

EXPLODED VIEW

FERM CIRCULAR SAW FKS-180

USERS MANUAL

TECHNICAL SPECIFICATIONS

PACKAGE CONTENTS

1 Circular saw

1 Box wrench 13 mm

1 Saw blade Ø 180 mm

1 Parallel stop

Check first whether or not the delivery has been dama-

ged by transport and/or whether all the parts are pre-

sent.

PRODUCT INFORMATION

1. Handle

2. Spindle lock

3. On/off switch

4. Depth of cut adjusting knob

5. Mains lead

6. Riving knife

7. Blade guard

8. Hexagonal bolt

9. Shoe

10. Flange

11. Saw Blade

12. Parallel stop

13. Parallel guide adjusting knob

14. Cutting angle adjustingknob

SAFETY INSTRUCTIONS

The following pictograms are used in these instructions

for use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance with

the instructions to make sure it functions properly. Keep this

manual and the enclosed documentation with the machine.

Ferm products are manufactured to high quality standards,

they are safe and fit for purpose at time of sale, but all tools

can be dangerous if the correct precautions are not taken.

Always follow these instructions, do not carry out the ope-

ration until you are sure you can do so in safety. Remember

to consider the work environment for safe operation as well

as safety for tool use.

Warning! When using electric tools, basic safety

precautions should always be followed to reduce

the risk of fire, electric shock and personal injury. Read all

these instructions before attempting to operate this product.

Save these instructions for future reference.

PERSONAL SAFETY

Use Personal Protection Safety Equipment

Protect eyes with safety glasses or goggles note: the use

of safety protective eyewear without the CE mark can

lead to serious injury if the lens breaks. A suitable dust

mask should be worn if cutting, drilling or sanding is

dusty, in particular chipboard or MDF. Approved safety

footwear and headgear should worn as appropriate, for

example on building works or when heavy weights are

involved. Wear suitable gloves and apron to protect

against sparks/debris. Wear earplugs or ear defenders.

Dress properly

Do not wear loose clothing or jewellery. It can get caught

in moving parts. Non-skid footwear is recommended

when working out doors. Wear protective hair covering

to contain long hair

Stay alert

Watch what you are doing Use common sense. Do not

operate tools when tired or after taking alcohol or pre-

scription/ non-prescription drugs.

4 8 10 3 1 2 14

5 6 7 11 9 12 13

Voltage | 230 V~

Frequency | 50 Hz

Power input | 1200 W

No load speed | 4100/min

Saw blade dimensions | 180x1.8x

| 20 mm

Number of teeths | Z18

Max. cutting depth | 62 mm

Weight | 4.72 kg

Lpa (sound pressure level) | 95.4 dB(A)

Lwa (sound power level) | 108.4 dB(A)

Vibration value | ≤2.204 m/s2

2Ferm

10 Ferm

OPERATIONAL SAFETY

Warning! Never use the machine for sawing

asbestos. If asbestos is discovered or suspected,

contact your local council for advice.

Concentrate

Routine and repetition can lead to mistakes. Remember

that a slight lack of concentration can result in serious

injuries in a split second.

Keep work area clean

Cluttered areas and benches invite injuries.

Consider the work environment

Do not expose power tools to rain or use them in damp

or wet locations. Keep work area well lit. Do not use

power tools in the presence of flammable liquids, vap-

ours or gases.

Guard against electric shock

This unit contains dangerous voltages. Use a RCD (resi-

dual current device) to provide protection against elec-

trical shock. Prevent body contact with grounded sur-

faces (e.g. pipes, radiator, ranges or refrigerators).

Keep children and pets away

Do not let children or pets come into contact with the

tool, extension cable or work area.

Do not force the tool

It will work better and safer at the rate for which it was

intended.

Use the right tool

Do not force small tools or attachments to do the job of a

heavy-duty tool. Do not use tools for purposes for which

they were not intended; for example do not use a circular

saw for cutting trees or logs.

Do not abuse cable

Never carry the tool by the cable or pull it to disconnect

it from the power socket. Keep the cable away from heat,

oil and sharp edges. Do not touch the metal plug pins

when connecting or removing the plug.

Secure Work

Use clamps or a vice to hold work. It is safer than using

your hand and it frees both hands to operate the tool. Be

aware that this saw is a powerful machine; you must use

two hands to control it.

Do not over-reach

Keep a proper footing and balance at all times.

Disconnect tools from power supply

When not in use, before servicing and when changing

accessories such as blades, bits and cutters. Always

switch off and unplug the saw from the power

supply before making adjustments or changing

blades.

Remove adjusting keys and wrenches

Ensure that they are removed from the tool before swit-

ching on.

Avoid unintentional starting

Do not carry plugged in tools with your finger on the

switch. Check that the switch is off before plugging in to

socket.

Outdoor use extension cables

When the tool is used outdoors use only an extension

cable intended for outdoor use and marked accordingly.

Use a RCD (residual current device) to provide protec-

tion against electrical shock. Do not use in rain or damp

conditions.

Connect a dust extraction device

Whenever there are facilities for fitting a dust or fume

extraction system, make sure it is connected and used.

Use recommended accessories

The use of any other accessory or attachment other than

recommended in the instructions or catalogue may pre-

sent a risk of personal injury. Use extension cables suita-

ble for the power input of the saw (minimum cable size

1.5mm2). When using a cable reel unwind the cable fully.

Ferm 3

SPARE PARTS LIST FKS-180

REF NR DESCRIPTION FERM NR

8/9/10 CARBON BRUSH (SET) 700000

11 CARBON BRUSH CAP 700001

16 STATOR 700002

22 AUXILIARY HANDLE 700003

24 SWITCH 700004

27 ROTOR 700005

37 GEAR 700006

38 FLANGE (OUTSIDE) 700007

42 SPLITTER 700008

43 SPRING 700015

44 SAW BLADE PROTECTION COVER 700009

45 HARD METAL SAW BLADE Ø 180 MM 310310

46 FLANGE (INSIDE) 700010

47 LEFT BOLT FOR SAW BLADE 700011

50 SOCKET SPANNER 700012

55 PARALLEL GUIDE 700013

61 GUIDE PLATE 700014

Especificaciones del producto

Marca:	Ferm
Categoría:	máquina de aserrar
Modelo:	FKS-180
Pantalla incorporada:	Ja
Número de programas:	30
Manual de usuario:	Ja
factor vorm:	Elektrode-eenheid
Estuche de almacenamiento:	Ja
Número de canales:	4 kanalen
Tipo-de-visualización:	Matrix colors
Ancho de pulsación:	400 µs