Fibaro Double Switch 2 FGS-223 Manual de Usario

Fibaro No categorizado Double Switch 2 FGS-223

Lee a continuación 📖 el manual en español para Fibaro Double Switch 2 FGS-223 (29 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/29
CONTENTS
#1: Description and features 4
#2: Supported loads 5
#3: Installation 6
#4: Adding/removing the device 8
#5: Operating the device 9
#6: Power and energy consumption 12
#7: Associations 13
#8: Z-Wave range test 14
#9: Additional functionality 15
#10: Advanced parameters 16
#11: Specications 24
#12: Regulations 25
O P E R A T I N G
M A N U A L
EN
FIBARO
SINGLE/DOUBLE SWITCH 2
FGS-2x3
v1.3
3
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
!
Danger of electrocution!
FIBARO Switch 2 is designed to operate in electrical home
installation. Faulty connection or use may result in re or
electric shock.
All works on the device may be performed only by a qualied and
licensed electrician. Observe national regulations.
Even when the device is turned o, voltage may be present at
its terminals. Any maintenance introducing changes into the
conguration of connections or the load must be always performed
with disabled fuse
General information about
the FIBARO System
FIBARO is a wireless smart home automation system, based on the
Z-WaveTM protocol. All of available devices can be controlled through
a computer (PC or Mac), smartphone or tablet. Z-Wave devices are
not only receivers, but can also repeat the signal, increasing the
Z-Wave networks range. It gives advantage over traditional wireless
systems that require direct link between transmitter and receiver, as
a result the construction of the building could aect networks range
negatively.
Every Z-Wave network has its unique identication number (home
ID). Multiple independent networks can exist in the building without
interfering. Transmission security of FIBARO System is comparable to
wired systems.
Z-Wave technology is the leading solution in smart home automation.
There is a wide range of Z-Wave devices that are mutually
compatible, independently of manufacturer. It gives the system the
ability to evolve and expand over time. For more information visit:
www.baro.com.

Especificaciones del producto

Marca: Fibaro
Categoría: No categorizado
Modelo: Double Switch 2 FGS-223

¿Necesitas ayuda?

Si necesitas ayuda con Fibaro Double Switch 2 FGS-223 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Fibaro Manuales

No categorizado Manuales

Últimos No categorizado Manuales