Fieldmann FDAK 201101-E Manual de Usario

Fieldmann Compresor FDAK 201101-E

Lee a continuación 📖 el manual en español para Fieldmann FDAK 201101-E (6 páginas) en la categoría Compresor. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

Air compressor

Part list

1. ON/OFF Switch

2. Carrying handle

3. Accessory compartment

4. Mains plug

5. Compressed air hose

6. Stand

7. Manometer with gun

8. Release valve

9. Compressed air connector

10.Hose with level quick coupler

11.Trigger

12.Adapter nozzle

13.Adapter nozzle

14.Adapter nozzle

15.Extension nozzle

16.Universal adapter

17.Universal adapter

18.Nozzle adapter for the nozzle set

19.Ball needle

20.Valve adapter

Operation

Note:

The appliance vibrates during operation. Therefore always put it down

during operation. There are four feet (6) on the bottom of the appliance

for this purpose.

Remove the required accessories from the accessory compartment (3).

Switching on and off

Switching the appliance on:

Move the ON/OFF switch into the position “I” to switch the appliance

on. The integrated control lamp lights up.

Switching the appliance off:

Move the ON/OFF switch (1) into the position “O” to switch the appliance

off. The integrated control lamp goes out.

Compressed air hose with quick coupler (5) Connecting:

Compressed air hose with quick coupler (5) Connecting: Compressed air hose with quick coupler (5) Connecting:

Push the compressed air connector (9) into the quick couple of the

compressed air hose (5),the sleeve automatically springs forwards.

Cutting:

Cutting: Cutting:

Pull back the sleeve on the quick coupler of the compressed air hose (5)

and remove the compressed air connector(9).

Caution!

Caution! Caution!

When disconnecting the quick coupler of the compressed air hose (5)，

Hold the coupler firmly to prevent injuries caused by the hose flying off.

Area of use:

Area of use: Area of use:

This application allows for a simple and accurate inflation of car tires.

The manometer (7) is used to check the tire pressure.

Insert the mains plug (4) of the compressor a mains power socket.

Switch the ON/OFF switch (1) to “I”. The integrated control lamp lights

up.

Read the air pressure from the manometer (7).

Switch the ON/OFF switch (1) to “O” as soon as the correct of permissible

air pressure has been reached.

Press down the lever quick coupler (10) and pull it off the valve.

Remove the mains plug (4) from the mains power socket.

Using the valve adapter

Sclaverand valve, race valve

Dunlop valve, bicycle valve

Area of use:

The valve adapter (20) facilitates easy inflation of bicycle tires.

Use the valve adapter (20) to pump to the valves shown above.

Connect the valve adapter (20) into the lever quick coupler (10) and then

release it.

Start by pressing the valve adapter onto the valve.

Inflate as described above.

Using the ball needle (19)/universal adapters (16)(17) can be used to

inflate air mattresses or similar.

Especificaciones del producto

Marca:	Fieldmann
Categoría:	Compresor
Modelo:	FDAK 201101-E
Color del producto:	Zwart
Ancho:	75 mm
Profundidad:	145 mm
Altura:	140 mm
Número de lámparas:	1 gloeilamp(en)
Lámpara de encendido:	4 W
Código de seguridad internacional (IP):	IP44
Flujo-luminoso:	225 lm
luz de color:	Koel wit
Temperatura del color:	6300 K
Los activos totales:	4 W
clase de protección:	II
Tipos de lámparas compatibles:	LED
Índice de reproducción cromática (CRI):	65
Ángulo de haz:	140 °
tecnología de lámparas:	LED
voltaje-de-entrada-de-CA:	230 V
Frecuencia-de-entrada-de-CA:	50 Hz
Temperatura de funcionamiento (TT):	-20 - 40 °C