Fluval Aquasky Manual de Usario

Lee a continuación 📖 el manual en español para Fluval Aquasky (28 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/28
APP CONTROL LED
FOR FRESH OR SALTWATER AQUARIUMS
PER APP GESTEUERTE LED FÜR SÜSS-ODER MEERWASSERAQUARIEN
RAMPE À DEL POUR AQUARIUMS D’EAU DOUCE ET D’EAU DE MER
PARA ACUARIOS DE AGUA DULCE O SALADA
LED CONTROLADO POR APP PARA AQUÁRIOS DE ÁGUA
SALGADA OU DOCE
СВЕТОДИОДНОЕ ОСВЕЩЕНИЕ, КОТОРЫМ МОЖНО УПРАВЛЯТЬ
С ПОМОЩЬЮ ПРИЛОЖЕНИЯ
STEROWANIE Z UŻYCIEM APLIKACJI DO AKWARIÓW Z WODŻ
SŁODKŻ LUB SŁONŻ
LED OVLÁDANÁ POMOCÍ APLIKACE PRO SLADKOVODNÍ NEBO
SLANOVODNÍ AKVÁRIA
SKY
Aquasky operates exclusively via your
mobile device (not included).
Aquasky lässt sich ausschließlich über Ihr
Smart Phone oder Tablet (nicht enthalten)
steuern.
La rampe d’éclairage Aquasky fonctionne
uniquement à partir d’un appareil mobile
(non inclus).
Aquasky funciona exclusivamente con un
dispositivo móvil (no incluido).
Aquasky werkt uitsluitend via uw
smartphone of tablet (niet meegeleverd).
O Aquasky funciona exclusivamente
através do seu smartphone ou tablet (não
incluídos).
Управление Aquasky осуществляется
непосредственно с помощью смартфона
или планшета (не входят в комплект).
UrzŻdzeniem Aquasky moŻna sterow
wyłŻcznie zyciem smartfona lub
tabletu (brak w zestawie).
Ostlení Aquasky lze ovládat výhradnŻ
pomocí vašeho smartphonu nebo tabletu
(není souŻástí dodávky).
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MODE D'EMPLOI
MANUAL DE INSTRUCCIONES
INSTRUCTIEHANDLEIDING
MANUAL DE INSTRUÇÕES
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
INSTRUKCJA OBSŁUGI
VOD K OBSLUZE
EN
IMPORTANT SAFETY INSTRUCTIONS
WARNING To guard against injury, basic safety precautions should be
observed, including the following:
1.
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
and all the important notices on the appliance before using. Failure to do so may
result in loss of fish life and/or damage to this appliance.
2. DANGER To avoid possible electric shock, special care should be taken since
water is employed in the use of aquarium equipment. For each of the following
situations, do not attempt repairs yourself; return the appliance to an authorized
service facility for service or discard the appliance.
A. If the appliance shows any sign of abnormal water leakage, immediately unplug
it from the power source.
B. Carefully examine the appliance after installation. It should not be plugged in if
there is water on parts not intended to be wet. If the appliance or any part of it
falls into the water DO NOT reach for it. First unplug the unit before retrieving.
C. Do not operate any appliance if it has a damaged cord or plug, or if it is
malfunctioning or it is dropped or damaged in any manner. The power cord of
this appliance cannot be replaced; if the cord is damaged, the appliance should
be discarded. Never cut the cord.
D. To avoid the possibility of the
appliance plug or receptacle
getting wet, position the appliance
to one side of a wall mounted
receptacle to prevent water from
dripping onto the receptacle or
plug. A “drip loop” (see illustration)
should be arranged by the user for
the cord connecting appliance to a
receptacle. “The drip loop” is that
part of the cord below the level of
the receptacle or the connector
if an extension cord is used, to
prevent water from travelling along
the cord and coming in contact with the receptacle. If the plug or receptacle
does get wet, unplug the cord. Disconnect the fuse or circuit breaker DO NOT
that supplies power to the appliance. Then unplug and examine for presence of
water in receptacle.
3. This appliance is not intended for use by persons (including children) with
significantly impaired physical or mental capabilities, unless they have been
given supervision or instruction concerning the use of the appliance by a person
responsible for their safety. Children should always be supervised to ensure that
they do not play with the appliance.
4. To avoid injury, do not touch moving parts or hot parts
.
5. CAUTION - Always unplug or disconnect all appliances in the aquarium from
electricity supply before placing hands in water, before putting on or taking off parts
and while the equipment is being installed, maintained or handled. Never yank cord
to pull plug from outlet. Grasp the plug and pull to disconnect. Always unplug an
appliance from an outlet when not in use.
6. Do not install or store the appliance where it will be exposed to weather or
temperatures below freezing. FOR INDOOR HOUSEHOLD USE ONLY. DO NOT
IMMERSE.
7. Make sure the appliance is mounted correctly and securely positioned on the
aquarium before operating the appliance.
8. If an extension cord is necessary, a cord with proper rating should be used. A
cord rated for less amperes or watts than the appliance rating may overheat. Care
should be taken to arrange the cord so that it will not be tripped over or pulled. The
connection should be carried out by a qualified electrical installer.
9. Use only with AC adapter supplied with this product.
10. The socket-outlet shall be installed near the equipment and shall be easily
accessible.
11. LED power supply shall not be positioned on or into the cover frame.
12. “Z” attachments: The external flexible cable or cord of this luminaire cannot be
replaced; if cord is damaged the luminaire shall be destroyed.
13. This luminaire can be mounted on any aquarium with glass thickness of between
3mm and 15mm.
14. ATTENTION: The light source of this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire shall be replaced.
15. Do not stare at the operating light source. ATTENTION:
SAVE THESE INSTRUCTIONS
For the complete use and understanding of this product it is recommended that this
manual is thoroughly read and understood. Failure to do so may result in damage to
this product.
The Fluval Aquasky Bluetooth® LED combines super bright 3000-25000 K LEDs with tri-color RGB
LEDs to allow the user to adjust, via Bluetooth
® enabled smart device, the light spectrum in order
to replicate various environments; and create such effects as cloud cover, fading lunar, storm
and lightning.
INSTALLATION AND USAGE:
Please verify that all components of the light fixture are undamaged before putting it
into operation. Before any kind of maintenance, always disconnect electrical supply
of the light fixture.
Make sure the light fixture is mounted correctly and securely positioned on the
aquarium before operating the appliance.
On a plain glass aquarium always ensure that the brackets are on the outside of
the aquarium frame. If needed, the extendable mounting brackets can be adjusted
accordingly to ensure proper fit on aquarium.
Connect the plug from the transformer to the plug on the fixture.
Connect the transformer to electrical supply.
SCAN HERE to learn more
and download the free Fluval Smart app
or search ‘Fluvalsmart’ in app store.
For full instruction manual and video on set up of Bluetooth® application, visit:
fluvalaquatics.com/aquaskybluetooth
FULLY CONTROLLABLE FROM YOUR SMART PHONE OR TABLET
MOUNTING BRACKET INSTRUCTIONS:
This is a mounting system only and does not provide power to the LED strip.
REMOVING THE EXISTING LIGHT TUBE
Disconnect the T8/T5 lighting system from the power supply and do not reconnect.
Please ensure that the LED strips are not connected to the power supply when
mounting into the T8/T5 lighting system using the mounting brackets.
Unscrew both end caps and move them into the center of the tube.
Remove the tube by sliding it gently out of the fitting.
INSTALLING THE MOUNTING BRACKETS
Clip the mounting brackets over the ends of
the extending arms of the LED strip, as per
the photo (A). You may need to pull out the
extending arms slightly to do this.
For T5 lighting systems: fit the end caps over
the end of the mounting brackets, to face
inwards.
For T8 lighting systems: click to fit the T8
ring adapter onto the end of each mounting
bracket, then follow the instructions above for
T5 lighting systems.
Fully tighten the end caps back onto the
threads, being careful not to cross thread or
over tighten. You may need to extend or retract
the extending arms to make the LED strip t
perfectly (B).
WARNING: Before connecting the power supply, ensure that the LED strip is
securely fastened to lighting system of the aquarium so that it is stable and cannot
fall into the water. The LEDs are tested to IPX7, which means they can withstand
temporary submersin. NOTE: THIS IS NOT A SUBMERSIBLE LIGHT.
Clip the mounting brackets over the ends of the extending arms of the LED strip, as
Connect the power supply to the LED strip and switch on.
INSTALLING THE CEILING BRACKET
Clip the ceiling brackets over the back
(side with fins) of the LED strip.
Use suitable fixings for the intended mounting
surface. If you wish to bond the brackets to
glass or plastic use aquarium silicone.
WARNING: Do not screw the bracket onto
any housing containing electrical wiring or
connections, such as lighting ballasts, due to
severe risk of electric shock.
A
B

Especificaciones del producto

Marca: Fluval
Categoría: No categorizado
Modelo: Aquasky

¿Necesitas ayuda?

Si necesitas ayuda con Fluval Aquasky haz una pregunta a continuación y otros usuarios te responderán




No categorizado Fluval Manuales

Fluval

Fluval PF2 Manual de Usario

17 Septiembre 2024
Fluval

Fluval CO2 Manual de Usario

17 Septiembre 2024
Fluval

Fluval Aquasky Manual de Usario

16 Septiembre 2024
Fluval

Fluval Sea Manual de Usario

16 Septiembre 2024
Fluval

Fluval P10 Manual de Usario

12 Septiembre 2024
Fluval

Fluval P25 Manual de Usario

12 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales