Fujitsu PRIMEPOWER RX2520 M1 Manual de Usario

Fujitsu servidor PRIMEPOWER RX2520 M1

Lee a continuación 📖 el manual en español para Fujitsu PRIMEPOWER RX2520 M1 (26 páginas) en la categoría servidor. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/26
PRIMERGY RX2520 M1
System configurator and order-information guide
Contents
Instructions
Configuration diagram
Configurator
0 System software
I Basic unit
II Processor
III Memory
IV Graphics
V Accessible drives
VI Hard disk drives
VII PCI Controller
VIII Communication/Network
IX System Management Products (RemoteView)
X Miscellaneous
XI Country specific power cord
Change report
PRIMERGY Server
November 2016
System configurator and order-information guide
PRIMERGY RX2520 M1 Status 2016-10-31
Instructions
This document contains basic product and configuration information that will enable you to configure your system via
PC-/System-Architect.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/SystemArchitect
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
III Memory, example
There are X memory slots which can be equipped with XXX MB.
It is permissible to make up to X passes through the memory upgrade options
S26361-XXX-XXX S26361-XXX-XXX
Memory XXX MB
Memory XXX MB
X times
max. X times per system max. X times per system
In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x
Please note that there are information symbols which indicate necessary information.
For further information see:
http://ts.fujitsu.com/products/standard_servers/ind
(internet)
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.asp
(extranet)
Fujitsu PRIMERGY Server 2 of 26
System configurator and order-information guide
PRIMERGY RX2520 M1 Status 2016-10-31
Configuration diagram PRIMERGY RX2520 M1
System unit ( I )
with up to 8x or 12x 3.5" Hard disk drives
Motherboard
front side
Memory CPU1
( Channel A + B + C )
Bank 1 (2 Modules)
Xeon DP
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Memory CPU2
Up
( Channel D + E + F)
Bank 1 (2 Modules)
Xeon DP
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Memory (III ) Processor ( II )
rear side
Fan 1 - Fan 5
1. PSU 2. PSU
Redundant Fans
are standard!
Redundant power
supply option
Modular RAID
Raid Card for IME, Raid 0 / 1E
Support Raid Card for Raid 5
Low-profile extension slots for:
SCSI Controller for backup( VII )
SAS Disk Array ( VIII )
Communication/Network ( IX )
Miscellaneous ( X )
Slot 6 PCIe-3 x8, 390mm @ CPU2
Slot 5 PCIe-3 x8, 390mm @ CPU2
Slot 4 PCIe-3 x8, 390mm @ CPU2
Possibility to install PCIe x16 cards
Slot 3 PCIe-3 x8, max. 390mm @ CPU1
Slot 2 PCIe-3 x8, max. 312mm @ CPU1
Slot 1 PCIe-3 x4, max. 168mm @ CPU1 white colored
Dedicated for modular on-board LAN-Controller
Slot 7 PCIe-3 x8, max. 168mm @ CPU1
Internal slot for modular RAID-Controller
Key:
Included in basic unit Option
One , one CPU memory per CPU and one has to be selected for an orderable basic unit.PSU
Fujitsu PRIMERGY Server 3 of 26

Especificaciones del producto

Marca: Fujitsu
Categoría: servidor
Modelo: PRIMEPOWER RX2520 M1

¿Necesitas ayuda?

Si necesitas ayuda con Fujitsu PRIMEPOWER RX2520 M1 haz una pregunta a continuación y otros usuarios te responderán




servidor Fujitsu Manuales

servidor Manuales

Últimos servidor Manuales