Gallien-Krueger 115RBH Manual de Usario
Gallien-Krueger
Guitarra
115RBH
Lee a continuación 📖 el manual en español para Gallien-Krueger 115RBH (4 páginas) en la categoría Guitarra. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
RBH Series Cabinets
Owners Manual
210RBH
410RBH
115RBH
2
RBH Series Cabinets
Congratulations
Your purchase of a new Gallien-Krueger RBH Series Cabinet is surely the result
of much careful consideration on your part. For our part, we at Gallien-
Krueger are pleased that you chose us, and are determined that you will be a
satisfied customer. In choosing an RBH Series Cabinet, you own a Speaker
Cabinet with many unique features, that can take you where you have never
been before.
To get the most out of your new purchase please take a few minutes to read
through this manual. Your Cabinet should have come with the following
items, please check the contents of the box to ensure that you have everything.
Included with your 210RBH Cabinet:
210RBH 1
RBH Amplifier Clip 2
Owner’s Manual 1
Warranty Card 1
Included with your 410RBH or 115RBH Cabinet:
410RBH or 115RBH 1
RBH Amplifier Clip 2
Swivel Castor 4
Owner’s Manual 1
Warranty Card 1
If your RBH Cabinet did not come with all the items listed above, or if you
encounter problems while setting up your new equipment, please contact your
local dealer, or us as soon as possible at:
Gallien-Krueger, Inc.
2240 Paragon Drive
San Jose, CA 95131
phone: (408) 441-7970
fax: (408) 441-8085
Internet: www.gallien-krueger.com
Always Listening
I have never seen the point in doing things the way others have done them. I
also have not been very interested in following the latest fad. I am a Stanford
educated engineer who worked his way through school as a musician. Like all
musicians, I have lugged amplifiers up stairways and into car trunks, always
wondering why these things had to be so heavy, bulky, and hard to handle.
As I am the principal innovator at , our products reflect my attitudes and life
experiences. I don’t model my designs after other manufacturer’s products (as
some of our competitors are proud of reciting). Instead, I believe new and old
problems are best solved with new solutions. Having taken our own path,
products enjoy a unique, unmatched sound, allowing the artist using them
every opportunity to make an original statement.
Having supported my products for over thirty years, I have learned from the
story they tell. is a reflection of that story, and has a commit-
ment to support that legacy. Just as the products I created thirty years ago are
still telling their story, the products we create today will be talking to us
tomorrow.
We’ll be listening,
Robert Gallien
3
RBH Series Cabinets
2) Bi-amp / Full Range Switch:
Switches the crossover between Bi-Amp, and Full Range operation. When using
this cabinet with a head such as the , this switch should be
set to Bi-Amp mode. For operation with other mono or bridged amplifiers this
switch should be set to full range.
3) Full Range ¼'' Input:
Using a standard ¼'' speaker cable, this input jack provides full range operation
with any bass amplifier head.
4) High Frequency Attenuator:
Adjusts the volume level of the horn when the cabinet is in full range mode.
When used in Bi-Amp mode (as with the 700RB), this control is bypassed and
the high frequency level is adjusted by using the Tweeter control on the amp
front panel.
RBH Cabinet setup up for Bi-Amp Operation:
The Bi-Amp feature of the RBH Cabinets is engaged by setting the crossover
switch to Bi-Amp. You must use a true Bi-Amp head such a the GK 700RB, and
connect it to the crossover Speakon connector with a 4 conductor Speakon cable
(supplied with the GK Bi-Amp head). This setup gives the GK Bi-Amp head
complete control of the tweeter and woofer signals sent to your cabinet (the
crossover attenuator is bypassed). Now you can push the woofers to the max.,
while the tweeter remains clean, crisp and free of clipping distortion. In
addition, a smooth tight tone is easily dialed up by adjusting the Tweeter and
Woofer Master controls on the GK Bi-Amp front panel.
RBH Cabinet setup up for Normal Operation:
The RBH series is configured for normal operation (full range) by setting the
crossover switch to full range. In this mode you can use either the ¼” or
Speakon connector for operation. If you are using a Speakon cable you must
connect the amp positive lead to 1+ and the amp negative lead to 1- on the
connector. In this mode the cabinet is setup for full range operation and the
tweeter level is controlled by the crossover attenuator control.
RBH Amp Clip:
When installed the RBH amp clip is used to hold the amplifier in place while the
cabinet is rocked back. The clip is designed specifically for GK heads like the
700RB. Other heads may be too large or too heavy to use in this manner. To
install the clip simply slip it over the front edge of the cabinet top board. Space
the clip the same distance as the amplifier feet, with the post facing up. The feet
of GK heads like the 700RB will slip snugly over the clip posts and hold the amp
in place as the cabinet is rocked back. Other brand heads may be too large to
work in this application, so we recommend using only GK heads like the 700RB.
See “Detail A” on page 4 for visual instructions.
RBH Features
The are designed to offer the artist the ultimate in sound
quality and stage flexibility. They can be played in several positions, upright,
stacked on their sides, or rocked back for close monitoring situations. A unique
interlocking corner design allows the cabinets to lock together in the various
positions. When used in the rocked back position, the included
allows amplifiers such as the to be mounted on top.
All cabinets utilize a unique crossover system, providing easy setup for Bi-
Amp or Normal (full range) operation. If you have a head, such as
the you can easily gain the benefits of true Bi-Amp operation. Bi-Amp
systems use separate power amplifiers for the horn and woofer, with an
electronic crossover that separates the sound into highs (for the horn), and lows
(for the woofer). This arrangement does two things for the sound:
1) The crossover being electronic, can be far superior to the passive crossover
found in full range systems providing a more seamless, accurate sound.
2) With separate power amps for the horn and woofer, the artist can overdrive
the woofer power amp (creating the desired growl) while keeping the horn
amplifier clean and undistorted. This means the horn can be left on for a crisp,
clean high end, while the low end is able to deliver punch and growl. Mono full
range systems with passive crossovers can not deliver this type of performance.
With a passive crossover system the horn has to be turned off if the power amp is
over driven, depriving the artist of the his full sound.
Crossover:
12 3 4
1) Speakon Input Connector:
Allows for bi-amp operation when using the Speakon-Speakon cable provided
with any such as the amplifier. As shown in the picture
above, pins and connect the 350 Watt amplifier to the woofers in the
cabinet. Pins and , connect the 50 Watt amplifier to the horn. By using
only pins 1+ and 1- this connector may be used for full range operation with
any amplifier.
Especificaciones del producto
| Marca: | Gallien-Krueger |
| Categoría: | Guitarra |
| Modelo: | 115RBH |
¿Necesitas ayuda?
Si necesitas ayuda con Gallien-Krueger 115RBH haz una pregunta a continuación y otros usuarios te responderán
Guitarra Gallien-Krueger Manuales
5 Septiembre 2024
Guitarra Manuales
- Guitarra Yamaha
- Guitarra Pyle
- Guitarra Peavey
- Guitarra Behringer
- Guitarra Line 6
- Guitarra Fender
- Guitarra Ibanez
- Guitarra Gretsch
- Guitarra Traveler Guitar
- Guitarra Carlsbro
Últimos Guitarra Manuales
27 Octubre 2024
19 Octubre 2024
5 Octubre 2024
4 Octubre 2024
3 Octubre 2024
1 Octubre 2024
29 Septiembre 2024
27 Septiembre 2024
23 Septiembre 2024
22 Septiembre 2024