Gamber-Johnson 7160-0568 Manual de Usario

Gamber-Johnson No categorizado 7160-0568

Lee a continuación 📖 el manual en español para Gamber-Johnson 7160-0568 (3 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Rev.A

INST-645

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

INSTALLATION INSTRUCTIONS

Product

Revision

Form

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Printing Spec:

PS-001

GETAC V110 CRADLE

7160-0568

This instruction sheet is for the V110 cradle only. For instructions on features, set-

up, and operation of the V110 computer, please refer to the manual provided by

Getac with the computer.

This cradle is designed to be used with a variety of Gamber-Johnson mounting

systems. Installation instructions for other Gamber-Johnson products are provided

with each individual product.

This instruction sheet is for the following products:

Item No. 7160-0568-XX Cradle - Getac - V110

page 1/3

Latch

Lock Button

Screen Support

Guide Blocks

Bumpers

Deck

Stylus Holder

Front Hooks

Rear Hooks

4X 1/4-20unc x .62"

mounting studs

2X 6-32unc inserts-

Screen Support

mounting position

(on right and left)

page 2/3

V110 CRADLE FEATURE IDENTIFICATON

INSERTING AND REMOVING THE COMPUTER

INSERTING THE COMPUTER

Un-latch the cradle, making sure

the rear hooks move backward

(Figure 1)

With the computer held at an

angle, place the two notches on

the front edge of the computer

into the front hooks.

(Figure 2)

Lower the computer down on to

the cradle.

While pushing the computer down,

to compress the cradle connector,

close the latch to engage the rear

hooks into the notches on the

back edge of the computer.

(Figure 3)

Lock the latch, if required, for

security.

Adjust the position of the screen

support.

(Figure 4)

REMOVING THE COMPUTER

Move screen support back, close

display.

Unlock latch, if locked.

Press the Lock Button on the latch.

The latch will spring open and the

rear hooks will disengage from the

computer case.

Lift computer up off cradle, back

edge first.

Figure 2

Figure 3

Figure 4

Figure 1

page 3/3

Especificaciones del producto

Marca:	Gamber-Johnson
Categoría:	No categorizado
Modelo:	7160-0568
Peso.:	120 g
Lámpara de encendido:	10 W
Diámetro:	27.9 mm
Certificación:	IP20\nCE, EMC
Certificados de sostenibilidad:	RoHS
Cantidad por paquete:	1 stuk(s)
Voltaje de entrada:	220 - 240 V
Longitud:	600 mm
Tipo de ajuste/pie:	G13
Flujo-luminoso:	850 lm
Vida útil de la lámpara:	30000 uur
Potencia equivalente de una lámpara incandescente:	18 W
Temperatura del color:	3000 K
Frecuencia:	50 Hz
Lámpara de forma:	Buis
Sin metales pesados:	Hg (mercury), Pb (lead)
Índice de reproducción cromática (CRI):	80
Factor de potencia:	0.5
Ángulo de haz:	160 °
voltaje-de-entrada-de-CA:	220-240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Temperatura de funcionamiento (TT):	-20 - 45 °C
Número de ciclos de conmutación:	15000